330 likes | 348 Vues
Geometric dynamics for rotor filaments and wave fronts. Hans Dierckx 1 , Olivier Bernus 2,3 , Henri Verschelde 1. 1 Department of Mathematical Physics and Astronomy, Ghent University, Belgium 2 Institute of Membrane and Systems Biology, University of Leeds, United Kingdom
E N D
Geometric dynamics for rotor filaments and wave fronts Hans Dierckx1, Olivier Bernus2,3, Henri Verschelde1 1Department of Mathematical Physics and Astronomy, Ghent University, Belgium 2Institute of Membrane and Systems Biology, University of Leeds, United Kingdom 3 Multidisciplinary Cardiovascular Research Centre, University of Leeds, United Kingdom CPP 2009, Cambridge, UK 30 June 2009
Outline • Introduction • Filaments - Filament tension - Advanced dynamics - Anisotropy effects • Fronts - Surface tension - Anisotropy effects • Discussion • Conclusions
What are scroll wave filaments? • Filament = rotation axis of a spiral wave extended to 3D Hans Dierckx, 2009
Why study filament evolution? • Number of filaments vs. arrhythmiae # = 0 : healthy state (?) # = 1 : monomorphic tachycardia # > 1 : polymorphic tachycardia/ torsade de pointes #>>1 : fibrillation • Sensitivity of spirals/scrolls is localized around their centre filament prescribes surrounding electrical activity • Response functions/ sensitivity functionsBiktashev & Biktesheva, Phys Rev E 67, 2003
How to study filament evolution? • Start from generic reaction-diffusion equation: • Quantities for describing a scroll wave filament: • - revolution velocity w • - arclength s • phase angle f twist • - Filament curvature • k=1/R Hans Dierckx, 2009
Equation of motion for filaments (isotropic) • Equations up to order O(k², w³), derived using Frenet-Serret (T,N,B) coordinates • Derived by Keener & Tyson (SIAM rev 34(1), 1986), adapted by Biktashev et al. (Phil Trans R Soc Lond A 347,1994) • ‘Minimal model’ for filament motion • The motion of a filament is proven to be governed solely by its ‘shape’, i.e. curvature k and twist w
Filament tension • The coefficient g1 plays the role of filament tension • Positive g1 straightens filaments • Negative g1 can lead to filament instability/multiplication Biktashev, Holden & Zhang, Phil Trans R Soc 347, 1994 Biktashev, Holden & Zhang, Phil Trans R Soc 347, 1994 Fenton & Karma, Chaos 8(1), 1998
Further facts on filament motion • Not yet captured in the presented equations of motion: • Twist can destabilize straight filaments(sproing instability) • When scroll rings shrink, their radial and axial velocity are not proportional to each other
s r2 r1 Geometrical theory for filaments • Construct a full solution from lower-dimensional counterparts: • Scroll wave = a stack of 2D spiral waves • Ansatz has been used before, but this time with a geometric perturbation scheme (Verschelde, Dierckx & Bernus Phys. Rev. Lett. 99(16), 2007) • Use Fermi-Walker frame instead of Frenet-Serret = + …
Gradient expansion True solution as a perturbation to cylindrical scroll wave: Hans Dierckx, 2009 Hans Dierckx, 2009
Result: advanced filament dynamics • For isotropic media, we have obtained terms up to O(k³, w³): • Observations: 1. Scroll ring rotation velocity depends on curvature 2. Coupling of twist to motion only through filament curvature 3. Effective filament tension 4. Filament motion in an isotropic medium is captured by 3+5+5 = 13 model-dependent coefficients 5. El.phys. model via reaction term hidden in the coefficients
Special cases of the advanced dynamics: • Straight filament with nonzero twist (‘sproing’) • Effective filament tension gets <0 for large twist (if a1<0)
Special cases of the advanced dynamics: 2. Untwisted scroll ring: Drift velocities need not be proportionate for large k Keener & Tyson, SIAM review 34(1), 1992
Facts on filaments in anisotropic tissue (1/2) • Dynamics in a medium with rotational anistropy: • 1. An intramural filaments drift to a layer where the fibres run parallel or perpendicular to the filament(Wellner et al., Phys Rev E, 61(2), 2000) • 2. A straight transmural filament loses stability when fibre rotation rate is increased(Fenton et al., Chaos 8(1), 1998)
Facts on filaments in anisotropic tissue (2/2) • Statics: look for the equilibrium position of a filament • Wellner’s minimal principle (2003) Wellner et al., PNAS 99(12), 2003 With fibres Without fibres the equilibrated filament lies along a geodesic (curve of shortest length), when measuring distances according to
How to deal with anisotropy? • Activation waves propagate faster along the myofibres’ axes • Conduction velocity is related to the electric diffusion tensor in the RDE: • ‘Effective’ distance ~ connectivity: • T(a b) < T(a ||| b)
Operational measure of distance (1/2) B B Hans Dierckx, 2009 A A C C Hans Dierckx, 2009
Operational measure of distance (2/2) • When moving at a fixed local velocity: operational definition of distance = travel time ! • Perform local rescaling according to local velocity: • The inverse diffusion tensor arises as a metric tensor…(Wellner et al., PNAS 99(12), 2003; Verschelde et al., Phys. Rev. Lett. 99(16), 2007) • Resulting space = curved/non-Euclidean
What is a metric tensor? • A metric tensor is used in non-trivial spaces to correlate coordinates to distances • Varying fibre orientation induces curvature of space • Physical properties of a non-Euclidean space are contained in second-order derivatives of the metric tensor: • -Riemann tensor Rijkl (6 components) - Ricci tensor Rij = Rkilj gkl (6 components) - Ricci scalar R = Rij gij (1 component)
Derivation of the equations of motion • Construct a co-moving curvilinear coordinate frame • Insert the Ansatz • Consider the Goldstone modes of the linearized operator • Project onto the left Goldstone-modes (sensitivity functions) • Write the result in a coordinate invariant way
Results: filament revolution velocity • Filament rotation velocity up to O(k³, w³, kR): • Some consequences for rotational anisotropy a=µz: • Rotation of a transmural filament is slower due to rotational anisotropy (if e0>0) • Non-constant fibre rotation, i.e. µ(z) induces twist
Results: anisotropic filament motion (1/2) • For translation/drift (in lowest order):(Verschelde,Dierckx & Bernus, PRL, 2007) • Equation of motion is unaltered, but now includes anisotropy, since distances are measured using • Steady state: Proof of the geodesic principle by Wellner et al. (2002) Hans Dierckx, 2009
Results: anisotropic filament motion (2/2) • EOM for filaments up to O(k4, w4, R2), in anisotropic medium: • (in complex notation : i= rotation of 90° in transverse plane) • Filament tension is altered by anisotropy: • Contains (small?) corrections to the minimal principle:
Filament motion in rotational anisotropy (1/2) 1. Transmural filaments can become unstable due to filament tension modification throughR
Filament motion in rotational anisotropy (2/2) 2. A straight, untwisted intramural filament will drift towards a layer with or || fibres: Wellner, Berenfeld & Pertsov Phys Rev E 61(2), 2000
Wave fronts : eikonal equation • Activation waves propagate with a velocity that depends on their curvature • Explained in terms of # excited neighbouring cells • Eikonal equation (Zykov, Keener):
Results: geometric front dynamics (1/2) • The eikonal equation is retrieved in general form: • Anisotropy included (measure distances using g=D-1) • A model-dependent coefficient g is obtained (can differ from 1) • g is proven to be the surface tension of the front: wavefront is stable g > 0
Results: geometric front dynamics (2/2) • Covariant eikonal equation: • Excellent correlation between theory & numerical simulation • Surface tension gamma depends on period of pacing • (see poster 21/07)
Discussion: Anisotropy Dynamics • Anisotropy intrinsic geometry/curvature of space • When considering space as experienced by the wavefront, motion equations are found in simple form (~ fictitious forces are eliminated) • New terms appear (k,R) due to curvature of space itself (~ tidal forces cannot be gauged away)
Discussion: Models Dynamics • Leading order dynamics involves model-dependent coefficients: - Wave fronts: g(T) - Scroll wave rotation: a0, …, e0 (#=5) - Filament drift: g1, g2, a1, a2, … q1, q2 (#= 2+22) • These constants can be assigned physical meaning (tension, stiffness, core cross-section, … ) and therefore could lead to more fundamental understanding of wave propagation • Different electrophysiological models with similar dynamical coefficients behave alike! • For effects included in the theory (twist+curvature+anisotropy), faster simulation with a simpler model could be feasible, depending on the study’s purpose (e.g. isochrones, stability)
Conclusions • Geometric theory for rotor filaments - Equation of motion for drift and rotation, including twist, fil. curvature and tissue anisotropy • Geometric theory for wave fronts - does not assume steep fronts; includes front + tail predicts surface tension g - can account for dispersive effects • Leading order dynamical coefficients are generated: - Depend on the model used - Can be calculated numerically - Bear physical meaning (tension, stiffness, …)
Challenges ahead • How can one measure the dynamical coefficients in living tissue? • What can the geometrical theory teach us about types of filament instability? • How to describe filament interaction (fibrillation)? • Can we numerically simulate realistic arrhythmias using filaments and geometry alone? [ O(N³) O(N) ]
Acknowledgements • PhD dissertation advisors: - Henri Verschelde (Universiteit Gent) - Olivier Bernus (University of Leeds) • Funded by Flanders Research Foundation (FWO Flanders)