1 / 44

Convective Parameterization in NWP Models

Convective Parameterization in NWP Models. Jack Kain And Mike Baldwin. What is convective parameterization?.

knoton
Télécharger la présentation

Convective Parameterization in NWP Models

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Convective Parameterization in NWP Models Jack Kain And Mike Baldwin

  2. What is convective parameterization? • A technique used in NWP to predict the collective effects of (many) convective clouds that may exist within a single grid element…As a function of larger-scale processes and/or conditions.

  3. Why do NWP models need to worry about it? • Direct Concern:To Predict convective precipitation • Feedback to larger Scales: Deep convection “overturns” the atmosphere, strongly affecting mesoscale dynamics - Changes vertical stability - generates and redistributes heat - removes and redistributes moisture - makes clouds, strongly affecting surface heating and atmospheric radiation

  4. A convective parameterization must decide 3 things: • Activation? Trigger function • Intensity? Closure Assumptions • Vertical Distribution? Cloud model or specified profile

  5. Trigger Functions CAPE Cloud Depth C I N Moist. Conv. Sub-cloud Mass conv. Cloud-layer Moisture ∂(CAPE)/∂t BMJ (Eta)    Grell (RUC, AVN)     KF (Research)     Bougeault (Meteo FR)   Tiedtke (ECMWF)    Bechtold (Research)     Emanuel (Research)  

  6. Closure Assumptions (Intensity) CAPE Cloud-layer moisture Moisture Converg. ∂(CAPE)/∂t Subcloud Quasi-equil. BMJ (Eta)   Grell (RUC, AVN)   KF (Research)  Bougeault (Meteo FR)  Tiedtke (ECMWF)  Bechtold (Research)  Emanuel (Research) 

  7. Vertical Distribution of Heat, Moisture Convective Adjustment Buoyancy Sorting Cloud Model Entraining/Detraining Plume BMJ (Eta)  Grell (RUC, AVN)  KF (Research)  Bougeault (Meteo FR)  Tiedtke (ECMWF)  Bechtold (Research)  Emanuel (Research) 

  8. How is the parameterized information fed back to the model? Consider the Temperature-Tendency Equation in a model: Where the convective term is simply

  9. Consider two very different approaches: BMJ Scheme (convective adjustment) KF scheme (mass flux scheme)

  10. Procedure followed by BMJ scheme… 1) Find the most unstable air in lowest ~ 200 mb 2) Draw a moist adiabat for this air 3) Compute a first-guess temperature-adjustment profile (Tref) 4) Compute a first-guess dewpoint-adjustment profile (qref)

  11. First Law of Thermodynamics: The Next Step is an Enthalpy Adjustment With Parameterized Convection, each grid-point column is treated in isolation. Total column latent heating must be directly proportional to total column drying, or dH = 0.

  12. Enthalpy is notconserved for first-guess profiles for this sounding! Must shift Tref and qvref to the left…

  13. Imposing Enthalpy Adjustment:

  14. Adjusted Enthalpy Profiles:

  15. Suppose the cloud layer was drier…reduce RH by 15%:

  16. Enthalpy is conserved, but the net temperature change is negative, and the net moisture change is positive: Negative Precipitation!

  17. If we systematically change cloud-layer RH in this sounding, it can be shown that precipitation rate generated by the scheme is very sensitive to deep-layer moisture:

  18. If the environment is too dry or CAPE layer is less than ~ 200 mb deep, the scheme attempts to initiate shallow (non-precipitating) convection 1) Set cloud-top height as the level within 200 mb of LCL where RH falls off most rapidly with height. 2) Find LCL of cloud-top air; line connecting LCLs of subcloud and cloud-top air is a “mixing line”. 3) Assume Trefhas same slope as mixing line; first-guess Tref is anchored on ambient temperature curve.

  19. With Shallow Convection, there is no net temperature or moisture change: and

  20. Consider the impact of parameterized BMJ shallow convection in a “normal” diurnal cycle… Model Initial Condition Raob BMX 12 Z 11 May 2000

  21. 1 h forecast Convective Adjustment Profiles… Initial time

  22. Convective Adjustment Profiles… 6 h forecast: BMJ convection inactive because “convective entropy change” would be negative. Sounding characteristics that lead to negative entropy change are not easily identified. 3 h forecast

  23. Other constraints that cause BMJ shallow convection to “abort”: - Net entropy change in cloud layer would be negative - Trefis super-adiabatic - Tref is isothermal - qrefgives a negative q at some level - qref gives an increase in q with height - qref gives super-saturated q at some level

  24. Back to the convective adjustment profiles… 9 h forecast – 2100 UTC

  25. Compare with raob at 00 Z: 12 h forecast Model forecast Raob BMX 00Z 12 May 2000

  26. Consider a transition from shallow to deep convection… FWD 00Z 20 April 2001 Model Initial Condition Raob

  27. Convective Adjustment Profiles… 1h Forecast

  28. Compare with raob at 12 Z: 12 h forecast Model forecast Raob FWD 12Z 20 April 2001

  29. 17 h forecast More Convective Adjustment Profiles… 16 h forecast

  30. 21 h forecast Continuing to work on the sounding… 18 h forecast

  31. Compare with raob at 00 Z: 24 h forecast Raob Model Forecast FWD 12Z 20 April 2001

  32. BMJ Deep convection activated only briefly at FWD, but 100 miles to the north (ADM), BMJ deep convection was more persistent and strongly modified soundings: EtaKF Model Forecast Model Forecast ADM 22 Z 20 April 2001

  33. OK, consider the KF scheme, a “Mass-flux” parameterization

  34. Updraft Source Layer Basic procedures… 1) Starting at the surface, mix ~ 50 mb deep layers, lift to LCL 2) Give parcel a boost based on low-level convergence. Can it reach the LFC? 3) If parcel makes it to LFC, allow it to rise and overshoot equilibrium level. 4) Form downdraft from air within ~ 200 mb of cloud base 5) Overturn mass in updraft, downdraft, and surrounding environment until stabilization is achieved. If cloud depth  3 km, parameterize shallow convection

  35. KF adjustment profiles

  36. Focus on deep convection…what is the Updraft Mass Flux (UMF*)? The mass of air that goes through cloud base divided by the initial mass in the ~ 50 mb updraft source layer: UMF* = Mu/Musl

  37. How is UMF determined?

  38. What is UMF* sensitive to? • qe of downdraft air • Lapse rates in cloud layer

  39. Increasing humidity in the 900 – 550 mb layer increases downdraft qe. This makes stabilization of the boundary layer less efficient and UMF* increases.

  40. Summary • Parameterized shallow convection can distort sounding structures, significantly affecting CIN and CAPE; more problematic with BMJ than with KF • BMJ deep convection very sensitive to cloud-layer RH • KF mass flux particularly sensitive to lapse rates in lower half of cloud layer.

More Related