1 / 15

Metallized Finishes

Metallized Finishes. Mark Gutman Mark Scabilloni Chad Fuhrman. Purpose/Objective. Make lightweight “stylish” plastic parts Has the appearance of metal Reflective capabilities. Presentation Contents. Electroless plating Metal-spraying Sputtering Vacuum Metallizing. Introduction.

lavada
Télécharger la présentation

Metallized Finishes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Metallized Finishes Mark Gutman Mark Scabilloni Chad Fuhrman

  2. Purpose/Objective • Make lightweight “stylish” plastic parts • Has the appearance of metal • Reflective capabilities

  3. Presentation Contents • Electroless plating • Metal-spraying • Sputtering • Vacuum Metallizing

  4. Introduction • Metallized Finishes • Thin Coat of Metal • Applied to non-metallic surface • Chemical Deposition • Exposing surface to vaporized metal

  5. Electroless Plating • Applications • Automotive/decorative • Types • Nickel • Copper • Silver

  6. Electroless Plating Cont’d. • Applied to surface • A line of baths and tanks • Advantages • Very thin : .25 - .50 micrometers • High production volume • Shiny surface finish

  7. Electroless Plating Cont’d. • Disadvantages • Porous surface finish • Premature corrosion • Limited flexibility

  8. Metal-spraying • Applications • Radio-frequency-interference (rfi) shielding • Types • Zinc • Aluminum • Copper

  9. Metal-spraying Cont’d. • Two Methods • Flame • ARC • Applied to surface • Sprayer head • Metal wire • Electrical contacts • Compressed air • Flammable gas orifices (Flame)

  10. Metal-spraying Cont’d. • Advantages • Protects against corrosion • Inexpensive equipment and materials • Easily applied to inside surfaces • Disadvantages • Manpower Expensive • Lower density than other coatings • Slow process

  11. Sputtering • Applications • Semi-conductors • Insulators • Silicon wafers • Types • Unlimited Materials

  12. Sputtering Cont’d. • Applied to surface • Utilizes energetic particle bombardment • Atoms collide with target • Advantages • Adaptable to hybrid processes • Material selection • Inexpensive equipment • Disadvantages • Stresses can develop within coating

  13. Vacuum Metallizing • Applications • Decorative • Types • Primarily aluminum • Applied to: Styrene, ABS, and Acrylic resins

  14. Vacuum Metallizing Cont’d. • Applied to surface • Basecoat applied • Vacuum pumps evaporate aluminum • Top coat applied • Advantages • High luster finish • Greater protection than other processes • Disadvantages • Expensive equipment

  15. Conclusions • Advantages of metallized finishes • Metal appearance at the cost of plastic • Lighter than metal parts • Versatility in applications • Disadvantages of metallized finishes • Expensive processes • Complicated processes • Advantages outweigh disadvantages for most applications.

More Related