lee-rocha
Uploaded by
5 SLIDES
560 VUES
100LIKES

Tolerance Analysis

DESCRIPTION

Tolerance Analysis. Identify each of the error sources. Determine the sensitivity of each performance parameter to changes in each error source assuming all other sources are error free.

1 / 5

Télécharger la présentation

Tolerance Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Tolerance Analysis • Identify each of the error sources. • Determine the sensitivity of each performance parameter to changes in each error source assuming all other sources are error free. • Assuming all error sources are independent of each other, calculate the maximum probable error in each performance parameter. • Add a safety margin before using the results in any specification.

  2. R2 R1 Vi - Vo + 0 Tolerance Analysis (Error Accumulation) Looking at contribution of R1 Or (% change) in gain equals – (% change) in R1

  3. Now, looking at contribution of R2 Or (% change) in gain equals (% change) in R2

  4. Assuming the errors in R1 and R2 are independent of each other: The maximum worst case error in gain will be: But sometimes the independent errors may tend to cancel each other, so the maximum probable error will be:

  5. Example of application: We need to supply an amplifier with a gain of –5 with a max probable error of 2%. To build in a 20% safety margin, we should target for a gain error of: And if we specify the same tolerances for both resistors:

More Related