1 / 21

InRoads Storm and Sanitary XM Tips V08.09.02.16

InRoads Storm and Sanitary XM Tips V08.09.02.16. InRoads Storm and Sanitary is accessed via the drainage tab. The first thing to do is to create a network. Customizing the Structures.dat file. The structure file can be client specific and loaded in the project defaults.

lenka
Télécharger la présentation

InRoads Storm and Sanitary XM Tips V08.09.02.16

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. InRoads Storm and Sanitary XM Tips V08.09.02.16

  2. InRoads Storm and Sanitary is accessed via the drainage tab

  3. The first thing to do is to create a network.

  4. Customizing the Structures.dat file The structure file can be client specific and loaded in the project defaults.

  5. Once a network is created, you can review the results

  6. In order to customize the look of your network, you need to customize the style.

  7. Adding Utilities When adding utilities, set up the utilities box, then select the graphics.

  8. Networks • Each pipe is created individually. • Crossing pipes will only show in profiles if created along a network. • Cannot selectively display crossing pipes (all or nothing). • Will shows lengths of pipe crossing your network. • Can be modified directly either in the profile or using other drainage tools. Features vs Networks Features Can be created individually or as strings. Can be added or updated in all profiles and cross sections. Can be selectively turned on and off in profiles & X-sections. Can only be modified using surface tools, and are static in profiles. All crossings are shown as “points” which are either symbols or cells.

  9. Creating a profile using a network 1. Create a profile from an existing alignment

  10. Using Style lock Style lock can be very useful for drawing pipes in profiles using attached symbology, but remember to turn it off when displaying pipes, especially if reference files are attached, as they might “blend in”.

  11. 2. Create a profile from a network (in this case, using style lock on) Select object to be displayed based on defined style

  12. 2. Create a profile from a network (in this case, using style lock on) Without Style Lock With Style Lock

  13. 3. Cleanup

  14. Update Profile This will work in MS, AutoCAD using V08.09.03.06. When working in DWG mode, if you have a profile that does not begin at the left side and you exit the session, upon returning, when updating your drainage profile you get an error and this mess.

  15. Profile Notes

  16. Profile Notes

  17. Cross Sections Once you open the cross section dialogue, look at the tabs

  18. Viewing pipes in 3D for conflict resolution

  19. View drainage as solids

  20. You can rotate your view, and add smooth shading to view pipe conflicts.

More Related