1 / 11

Gain and Quantum Efficiency of a Cold Photomultiplier

Gain and Quantum Efficiency of a Cold Photomultiplier. run a Hamamatsu R7725 @ 4 K determine minimum heat load measure quantum efficiency and gain vs T … and vs frequency. Hans-Otto Meyer Indiana University 10/7/06. The Plan. base part 1. base part 2. warm. cold. light pulser.

les
Télécharger la présentation

Gain and Quantum Efficiency of a Cold Photomultiplier

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Gain and Quantum Efficiency of a Cold Photomultiplier • run a Hamamatsu R7725 @ 4 K • determine minimum heat load • measure quantum efficiency and gain vs T • … and vs frequency Hans-Otto Meyer Indiana University 10/7/06

  2. The Plan base part 1 base part 2 warm cold light pulser R7725 Monitor PM opt. fiber light splitter thermometer Enclosure (evacuated, submersed in cryo-liquid)

  3. existing at this time (9/27/06) PM under test Burle 8850 base warm light pulser Monitor (8575) opt. fiber light splitter data acquisition

  4. Light source LED (LITEON LTST-C150) λ = 467 nm n-channel Mosfet Splitter (imperfect splice in clear epoxy) mounted LED pulse width: ~10 ns

  5. setup

  6. measure quantum efficiency ne = 3.6 ne = 2.0 red curve: ne = 1.1 peak index ne = 0.52 determined once and for all ne = 0.10 ne = 0.034 ne(avg. number of photoelectrons) from fit Quantum efficiency: from ne PM gain: from peak locations

  7. measure gain ne= 1.055 gain ≡ 1.0 ne= 1.053 gain ≡ 1.6 ne= 1.055 gain ≡ 2.5 changing PM HV: gain changes, but ne stays the same

  8. monitor The monitor signal is proportional to the light emitted from the splitter

  9. R7725 split base signal +HV cold warm long leads How is performance affected? Ho to fix it?

  10. cooling T T2

  11. Project is on hold

More Related