1 / 16

CCNA 3 Chapter 2 Introduction to Classless Routing

CCNA 3 Chapter 2 Introduction to Classless Routing. By Your Name. Objectives. VLSM RIP version 2. What Is VLSM and Why Is It Used?. Wasting Space. When to Use VLSM?. Calculating Subnets with VLSM. Route Aggregation. Configuring VLSM. RIP version 2. RIP History.

lew
Télécharger la présentation

CCNA 3 Chapter 2 Introduction to Classless Routing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CCNA 3 Chapter 2Introduction to Classless Routing By Your Name

  2. Objectives • VLSM • RIP version 2

  3. What Is VLSM and Why Is It Used?

  4. Wasting Space

  5. When to Use VLSM?

  6. Calculating Subnets with VLSM

  7. Route Aggregation

  8. Configuring VLSM

  9. RIP version 2

  10. RIP History • RIPv1 has the following limitations: • It does not send subnet mask information in its updates. • It sends updates as broadcasts on 255.255.255.255. • It does not support authentication. • It is not able to support VLSM or classless interdomain routing (CIDR).

  11. RIPv2 Features

  12. Comparing RIPv1 and RIPv2

  13. Configuring RIPv2

  14. Verifying RIPv2

  15. Troubleshooting RIPv2

  16. Default Routes • Default routes — The system administrator manually defines default routes as the path to take when there is no known route to the destination. • Default routes keep routing tables shorter.

More Related