1 / 21

Fall Protection

Fall Protection. A user-friendly training module to help supervisors and workers: Understand fall protection Prevent injuries Konecranes’ requirements. The Business 21 Publishing Safety Training Series. FALL PROTECTION. About this Presentation.

lhanna
Télécharger la présentation

Fall Protection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fall Protection A user-friendly training module to help supervisors and workers: • Understand fall protection • Prevent injuries • Konecranes’ requirements The Business 21 PublishingSafety Training Series FALL PROTECTION

  2. About this Presentation By the end of this Business 21 presentation, you’ll be able to: • Understand the critical importance of fall protection to the maintenance of a safe workplace. • Spot dangerous violations. • Minimize the chances of serious injury or death. FALL PROTECTION

  3. What is fall protection? A system to protect workers from falls and injury (or death) when working at heights. FALL PROTECTION

  4. What are the two physical forms of fall protection? • Fall prevention. This is a structure that limits a fall to the level the worker is on. • Fall arrest. This is equipment that limits injuries in case of a fall. FALL PROTECTION

  5. Fall prevention • Don’t defeat safety systems for reasons like easier entry and exit. • Don’t use a safety system that has been modified in a dangerous way. FALL PROTECTION

  6. Personal fall arrest equipment Three parts: • Anchor point • Body harness • Connector FALL PROTECTION

  7. Anchor point Precautions: • Don’t use anything – like a beam or a projection – with sharp edges. It can abrade or cut your lanyard. • Don’t tie off to something tacked or patched to the structure, or to suspension devices. Look for an anchor point that is integral to the structure, or install an engineered anchor. FALL PROTECTION

  8. Body harness • You may have kept an old harness from a previous job. Don’t use it unless your safety supervisor checks it out and gives the OK. • You should inspect your employer-issued harness and lanyard(s) regularly for damage. FALL PROTECTION

  9. Connector • Non-standard lanyards can jerk a worker hard in case of a fall. • No lanyard will do you any good unless it’s properly hooked to the anchor. FALL PROTECTION

  10. Select the correct lanyard. • Lanyard must stop the fall within the available distance. • Fixed length lanyards may not stop fall before hitting the lower level. • Retractable lanyards limit fall distance.

  11. Safety nets • An alternate fall arrest system for larger jobs. • Seldom used by Konecranes. FALL PROTECTION

  12. Why even good workers ignore fall protection • They’re in a hurry. • They don’t think a situation is dangerous enough to require it. • They think they’re experienced enough to avoid injury. FALL PROTECTION

  13. Frequent fall risks – #1 Crane walkways and platforms. • It’s easy to forget where you are in the press of work. • Konecranes requires 100% tie-off. FALL PROTECTION

  14. Frequent fall risks – #2 Openings in catwalks or floors. • These openings may be covered with a provisional covering that gives the illusion of safety, but won’t hold you. FALL PROTECTION

  15. Frequent fall risks – #3 Ladders and stairways • Use the three-point contact technique. • If a ladder starts at elevation, a fall arrest system may be necessary. • Unfinished stairways need guardrails. FALL PROTECTION

  16. Frequent fall risks – #4 • Scaffolds or lifts • Don’t tie off to the scaffold. It could fall, too. Instead use independent lifelines attached to a secure structure. • Don’t use lifelines or lanyards that are too long. A fall that is brought up short by a long lifeline or lanyard can cause extensive injury (or death). FALL PROTECTION

  17. Frequent fall risks – #5 Slippery surfaces • Snow, rain, or work around lubricants can make surfaces slick and unreliable. • Make sure you’re wearing appropriate footwear. Nonskid soles with tread are best. FALL PROTECTION

  18. Frequent fall risks – #6 Platforms, bridges or other structures under demolition • As with scaffolding, you need to be tied off to something that isn’t going to come down with the object of demolition. FALL PROTECTION

  19. Frequent fall risks – #7 • Materials-handling equipment • Forklifts and other such machines are not designed to give safe lifts to personnel. • Rather than use this kind of equipment, ask for a bucket truck or aerial lift where appropriate. FALL PROTECTION

  20. After the fall – a special risk Allowing an employee whose fall has been arrested to dangle for more than a few minutes. (Suspension trauma.) Have a predetermined rescue plan. FALL PROTECTION

  21. Summary Ignore fall protection at your peril. Here’s what can happen if you do: You can be seriously injured. You may DIE! You can be disciplined or fired, depending on how serious the safety violation was. FALL PROTECTION

More Related