1 / 65

RESPIRATORY PROTECTION

RESPIRATORY PROTECTION. 29 CFR 1910.134. RESPIRATOR PROGRAM. Requires a written program with work-specific procedures when respirators are needed Must keep written program updated as needed A program administrator is required

liam
Télécharger la présentation

RESPIRATORY PROTECTION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RESPIRATORY PROTECTION 29 CFR 1910.134

  2. RESPIRATOR PROGRAM • Requires a written program with work-specific procedures when respirators are needed • Must keep written program updated as needed • A program administrator is required • Employer must provide respirators, training, and medical evaluations at no cost to employees

  3. Proper selection Medical evaluation Proper use Care/maintenance Fit testing Breathing air quality Training Program evaluation PROGRAM ELEMENTS

  4. WHEN RESPIRATORS ARE USED BUT NOT REQUIRED • If respirators will not create hazard and if requested, employer may furnish respirators for “comfort” only use • If approved, employees may wear their own respirators for comfort only, but must follow program requirements • Voluntary use of filtering masks has reduced program requirements

  5. PERMISSIBLE PRACTICES • Engineering controls (enclosures, confinement of operations, ventilation, use of less toxic materials) are primary means to control hazards • When effective engineering controls are not available, respirators will be used • Respirators will be applicable to and suitable for the purpose intended • Employer will be responsible for program

  6. SELECTION • Based on the respiratory hazards to which the worker is exposed, workplace factors, and user factors that affect respirator performance and reliability • Respirators will be selected from a sufficient number of models and sizes to ensure correct fit and comfort

  7. TRAINING • Employers (managers and supervisors) must provide appropriate and effective training to employees who are required to use respirators

  8. TRAINING • Employees must be trained and demonstrate skill or knowledge of at least: • Why use is necessary • How improper use and care can compromise respirator effectiveness • Limitations and capabilities • How to put on, remove, use, and inspect • How to maintain and store • General requirements of the standard

  9. TRAINING • Training must be provided prior to use • Retraining is required at least annually, and whenever: • Prior training becomes obsolete • Employee’s skill or knowledge is deemed inadequate • Any other situation arises in which retraining appears necessary

  10. EMPLOYEE EXPOSURE • Exposure to a concentration of an airborne contaminant that would occur if the employee were not using respiratory protection

  11. RESPIRATORY PROTECTION • That portion of a respirator that forms the protective barrier between the user’s respiratory tract and contaminated air • May be a facepiece, helmet, or hood • May be tight fitting or loose fitting

  12. HAZARDOUS ATMOSPHERES • Oxygen deficient or rich • Toxic • Environmental pollution • Combination • Flammable • Immediately dangerous to life or health (IDLH)

  13. OXYGEN DEFICIENT • An atmosphere with an oxygen content below 19.5% (normal is 20.9%) • Spaces where oxygen may be depleted (confined spaces, boilers, tanks) • Space where decomposition of organic material (sewers, silos, basements)

  14. CONTAMINATED • Particles • Gases • Fumes • Vapors • Mists

  15. TWO RESPIRATOR TYPES • Air purifying - Removes contaminates before reaching breathing zone • Atmosphere supplying - Provides fresh air from an external source

  16. AIR PURIFYING • Particulates • Vapor and gas • Combination • Replaceable cartridge(s) or canister(s)

  17. AIR PURIFYING LIMITATIONS • Does not supply oxygen • Contaminant must be known and cannot exceed use limitations • Non-IDLH use only • Oxygen-deficient is IDLH • Unknown airborne concentrations must be considered to be IDLH

  18. ATMOSPHERE SUPPLYING • Type 1 - Airline respirator • Type 2 - SCBA

  19. AIRLINE RESPIRATOR • Has a pressure demand nozzle that allows user to control air flow • Use grade D breathing air • May be used with a hood or helmet to supply continuous air • Hose limited to 300 feet • Some mobility restriction

  20. SCBA • Expensive to purchase and maintain’ • Breathing air provided from pressurized tanks • Provides highest level of protection and mobility • Commonly used in rescue or emergency situations • Limited to air in tanks (30 or 60 minutes) • Positive pressure provides maximum protection for both oxygen deficient and IDLH • Standard requires fit testing of mask

  21. SELECTION • Must fit the wearer and be comfortable • Must be the type which best abates the hazards • Atmosphere hazard evaluation determines selection

  22. WRITTEN PLAN • The program must be be assigned to a trained and competent person • Describes in detail the hazard evaluation • Contains procedures for selection, use, and maintenance

  23. WRITTEN PLAN • Contains results of analysis of atmospheric contaminants • Physical and chemical properties • Adverse health effects • Warning properties • Permissible exposure limits (PELS) • Other accepted exposure limits

  24. WRITTEN PLAN • Additional plan criteria • Results of workplace atmospheric testing • Work requiring respirator use • Time expected to complete the task • Written plan to be made available to all involved employees

  25. FIT TESTING • Before an employee uses any respirator with a negative or positive pressure tight-fitting facepiece, the employee must be fit tested with the same make, model, style, and size of respirator that will be used • Must be administered using an OSHA accepted protocol

  26. FIT TESTING • Respirators rely on face-to-mask seal • Fit testing determines which device will best fit and seal • Stubble, beard, hairlines, glasses, and goggles will negatively affect fit • Corrective lenses may be mounted inside the facepiece

  27. FIT TEST PROCEDURES • Fit testing should be conducted annually, if facial features change or if a different respirator is used • Users of tight fitting respirators must perform a user seal check each time the respirator is used

  28. TYPES OF FIT TESTING • Qualitative (QLFT) – A challenge agent, vapor, or aerosol released • Fit is inadequate if a presence of the agent is detected (irritation, taste, or odor) • Quantitative (QNFT) - Measures actual level of agent both inside and outside the respirator

  29. FIT FACTOR • A quantitative estimate of the fit of a particular respirator to a specific individual • Ratio of: • Concentration of a substance in ambient air • Concentration of a substance inside the respirator

  30. FIT TESTING • QLFT may only be used to fit test negative pressure air purifying respirators that achieve a fit factor of 100 or less • A fit factor of at least 100 for tight- fitting half facepieces, or 500 for tight-fitting full facepieces from a QNFT is acceptable

  31. HEPA FILTERS • High efficiency particulate air • Removes 99.97% of particles that are 0.3 micrometers in diameter • N, R, or P 100

  32. FILTERS/CARTRIDGES • A component used in respirators to remove solid or liquid aerosols from inspired air • Also called an air purifying cartridge

  33. CANISTER OR CARTRIDGE • A container with a filter, sorbent (catalyst), or combination of these items, which removes specific contaminants from the air passed through the container

  34. SERVICE LIFE • The period of time that a respirator, filter, sorbent, or other respiratory equipment provides adequate protection to the wearer

  35. END OF SERVICE LIFE INDICATOR (ESLI) • A system that warns the user of the approach of the end of adequate respiratory protection; e.g., sorbent is approaching saturation or is no longer effective

  36. NEGATIVE PRESSURERESPIRATOR • A respirator in which the air pressure inside the facepiece is negative during inhalation with respect to the ambient air pressure outside the respirator

  37. FILTERING FACEPIECE • A negative pressure particulate respirator with a filter as an integral part of the facepiece, or with the entire facepiece composed of the filtering medium • “Dust mask” • N, R, or P 95

  38. POSITIVE PRESSURERESPIRATOR • A respirator in which the pressure inside the respiratory inlet covering exceeds the ambient air pressure outside the respirator

  39. POWERED AIR-PURIFYINGRESPIRATOR (PAPR) • An air purifying respirator that uses a blower/motor to force ambient air through air-purifying elements to the inlet covering

  40. ATMOSPHERE-SUPPLYINGRESPIRATOR • A respirator that supplies the user with breathing air from a source independent of the ambient atmosphere • Includes supplied-air respirators and self contained breathing apparatus (SCBA)

  41. ATMOSPHERE-SUPPLYINGRESPIRATORS • Continuous flow: Provides a continuous flow of breathing air to the respiratory inlet covering • Pressure demand: Admits air to the facepiece when the positive pressure inside the facepiece is reduced by inhalation

  42. SUPPLIED AIR RESPIRATOR • An atmosphere-supplying respirator for which the source of breathing air is not carried by the user • Also called airline respirator

  43. SCBA • An atmosphere-supplying respirator for which the breathing air is designed to be carried by the user

  44. ESCAPE ONLY RESPIRATOR • A respirator designed and intended to be used only for emergency exit

  45. POSITIVE PRESSURE FIT CHECK • Block off exhalation valve with palm • Blow outward gently • A good fit results in the pressure holding and no leaks found

  46. NEGATIVE PRESSURE FIT CHECK • Place palms over the inhalation inlets, or squeeze the breathing tube • Inhale gently - facepiece should collapse slightly • Hold breath about ten seconds • Good test indicated by pressure holding and no leaks found

  47. CONTINUING EFFECTIVENESS • Employees may leave the respirator use area: • To wash face or facepiece • If a “breakthrough” is detected • There is a change in breathing resistance • There is leakage of the facepiece • To replace respirator, filter, cartridge, or canister

  48. MAINTENANCE • Inspection • Decontamination • Storage

  49. INSPECTION • Holes in the filters • Loss of elasticity or tears in headstraps and hoses • Broken or loose connectors and hoses • Cracked or scratched facepieces • Detergent residue • Dirt in valves • General cleanliness

  50. CLEANING/DISINFECTING • Follow manufacturers directions • If worn by only one person, clean and disinfect periodically • If possible to be worn by more than one person, clean and disinfect after each use

More Related