1 / 31

Materials Selection for Engineering Design

Materials Selection for Engineering Design. Materials Selection. The designer of any product, other than software must get involved with material selection. Only occasionally will the exact grade of material be specified by the customer.

libitha
Télécharger la présentation

Materials Selection for Engineering Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Materials Selection for Engineering Design

  2. Materials Selection • The designer of any product, other than software must get involved with material selection. • Only occasionally will the exact grade of material be specified by the customer. • Even then the designer must understand the material to be able to design the product.

  3. Decisions, decisions! So many materials, so much information. How do we decide? How do we begin to choose? First we need to look at the function of the product – product analysis

  4. Product Analysis • Just what it says – analyse the product! • What does it do? • How does it do it? • Where does it do it? • Who uses it? • What should it cost?

  5. Case Study – a bike • What is the function of a bike – obvious? • How does the function depend on the type of bike? • Racing • Touring • Mountain bike • Commuter • Childs

  6. Case Study – a bike (2) • How is it made to be easily maintained? • What should it look like (colours etc.)? • What should it cost? • How has it been made comfortable to ride? • How do the mechanical parts work and interact?

  7. Component or system? • 1st problem is……. Is it one component or a system of components working together? A spanner is a component, a cordless screwdriver is a system.

  8. System Analysis • When we analyse a system we need to break the system down into individual components and then analyse each one.

  9. Cordless screwdriver

  10. System Analysis – the bike The bike breaks down (we hope not!) into various parts: • Frame • Forks • Wheels • Saddle • Etc.

  11. System Analysis – the bike (2) We now need to look at the following for each part: • Requirements (mechanical, ergonomic, aesthetic etc.) • Function • How many are going to be made? • What manufacturing methods are we going to use?

  12. Manufacturing Oh No! We have to actually make it! This is a key question which has a massive influence on materials selection. e.g. The frame, what materials could we use?

  13. Frame Materials • Steel – Strong, stiff, heavy, but cheap • Aluminium – weaker, lighter, more expensive than steel • Composite (CFRP) – strong, stiff, very light, but expensive to buy and to fabricate

  14. Bike Frame

  15. Frame Design Detail

  16. What Properties? • Mechanical – Strength, modulus etc. • Physical – Density, melting point. • Electrical – Conductivity, resistivity. • Aesthetic – Appearance, texture, colour • Processability – Ductility, mouldability • And last, but not least………. Cost, cost, cost!

  17. Where do I find the data? • Textbooks • Databooks • Manufacturer’s literature • Internet Sites

  18. Textbooks • Good for general information • Some have tables of properties • Not good for detailed specifications and properties. • A useful first point of call

  19. Databooks • One of the quickest sources of detailed information. • Usually contain grades and specifications as well as properties. • Small and perfectly formed – pocketbooks • Easy to navigate around

  20. Manufacturer’s literature • Variable in quality and usefulness. • Often only cover their products. • Usually do not compare materials. • Can be biased. • Good for final selection before ordering.

  21. Internet Sites • Can be a real minefield. • Lots of poorly presented information. • Google searches bring up lots of rubbish. • Hard to find technical information. • Best to use non-commercial sites.

  22. Materials Selection Charts

  23. Modulus - Density Chart • Modulus spans 5 orders of magnitude • 0.01 GPa for foams to 1000 GPa for diamond • The charts therefore use logarithmic scales, where twice the distance means ten times. • This makes it possible to show the full range on one chart,

  24. Materials Selection Charts

  25. Materials Selection Charts • Allow easy visualisation of properties • Show lots of different materials • Can be ‘drilled down’ to specifics • Show balances of properties e.g. strength v cost • Ideal for a first ‘rough cut’ selection

  26. Summary • Think about the design from ergonomic and functional viewpoint. • Decide on the materials to be used. • Choose a suitable process that is also economic Steps 2 & 3 may be iterative. Don’t forget the ……………

  27. Bigger Picture Is the product performance driven or cost driven? This makes a huge difference when choosing materials.

  28. Manufacturing Process Although we usually choose materials first sometimes it is the shape and process which is the limiting factor.

  29. Case Study (2) Drink Container • What are the requirements?

  30. Case Study (2) Drink Container • Provide leak free environment for storing liquid. • Comply with food standards & protect liquid from health hazards. • For fizzy drinks, withstand pressure. • Brand image & identity • Easy to open • Easy to store & transport • Cheap for high volumes

  31. Possible Materials • Steel • Aluminium • Glass • Plastic • Paper

More Related