1 / 14

13.2

13.2. Transferring Thermal Energy. I. Transfer of Energy. Conduction -transfer of energy by direct contact. Faster moving particles of one substance come into contact with slower moving molecules of another substance. 2. Conduction can take place in solids, liquids, & gases.

lindabgarcia
Télécharger la présentation

13.2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 13.2 Transferring Thermal Energy

  2. I. Transfer of Energy Conduction-transfer of energy by direct contact.

  3. Faster moving particles of one substance come into contact with slower moving molecules of another substance.

  4. 2. Conduction can take place in solids, liquids, & gases. 3. It is more likely to take place in solids 4. Metals are especially good conductors.

  5. B. Convection-transfer of energy in a fluid by the movement of the heated particles. Any material that can flow is considered a fluid. 2. Heated particles collide with each other and transfer their energy. 3. As particles move faster, they tend to be farther apart.

  6. Offshore convection currents Convection currents form by fluids heating up, rising, cooling off, falling.

  7. C. Radiation-the transfer of energy by electromagnetic waves.

  8. D. Insulators- materials that slows heat flow. Metals are typically poor insulators. 2. Gases are very good insulators. 3. Some types of insulators use pockets of air to help keep heat from flowing.

  9. II. Specific Heat Specific Heat-the amount of heat that is needed to raise the temp. of 1kg of some material by 1°C (or 1K). Specific heat is measured in J/kg·K OR J/g·0C Table 1 pg. 432 2. Water is a good coolant because it has a high specific heat.

  10. Specific Heat Problem 1 How much energy must be transferred as heat to the 420 kg of water in a bathtub in order to raise the water’s temperature from 250C to 370C?

  11. Specific Heat Problem 2 Identify an unknown substance with a mass of 0.455 kg that absorbs 6.33 x 103J, in which a temperature change of 15.50C is observed?

  12. Practice Pg. 434 Questions 1 – 6

More Related