110 likes | 126 Vues
Clockless Logic. Montek Singh Tue, Mar 16, 2004. Outline. Where are we? Recap: Logic Gate Families New Topic: Asynchronous Pipelined Processing. Where are we?. Introduction to clockless logic Benefits and challenges Data representation, and control signaling
E N D
Clockless Logic Montek Singh Tue, Mar 16, 2004
Outline • Where are we? • Recap: Logic Gate Families • New Topic: Asynchronous Pipelined Processing
Where are we? • Introduction to clockless logic • Benefits and challenges • Data representation, and control signaling • Graphical representation of asynchronous systems • Petri nets, state transition graphs, burst-mode machines, etc. • Algorithms for logic synthesis • Combinational & Sequential • VLSI design primer • Design techniques • High-performance: fine-grain pipelining • Low-power • Formal methods • Performance analysis • Verification • Case studies of real-world asynchronous processors
Review:Logic Gate Families Static CMOS logic Dynamic logic, or “domino” logic Transmission gates, or “pass-transistor” logic
Static CMOS logic Advantages: • output always strongly driven • pull-up and pull-down networks are fully-complementary;exactly one of them is “on” always • good immunity from noise and leakage • both inverting and non-inverting functions implementable • each gate is inverting • cascade two gates together to get non-inverting logic Disadvantages: • slow/big PMOS devices needed (in addition to NMOS) • greater chip area • higher power consumption • slower switching speed
Dynamic Logic, or “domino” Key idea: • only use NMOS’s to compute function • use a single PMOS to reset Advantages: • significantly fewer transistors smaller chip area • higher speed, lower power • less “loading” on wires (drive fewer transistors) • for async: no storage elements needed Disadvantages: • need extra control input to precharge • logic is typically non-inverting only • more vulnerable to noise and leakage effects
Dynamic Logic, or “domino” (contd.) Gate has 2 phases: • precharge (=reset): output reset to ‘0’ • evaluate: output computed either stays ‘0’, or switches to ‘1’ Pull-up and pull-down must never both be simultaneously active: • ensure that data inputs are reset while gate is precharging • or, add a “footer” device control input controls“precharge” PC PC =0 (asserted) precharge pull-upnetwork pull-down network dataoutput PC =1 (de-asserted) evaluate datainputs controls“evaluation”
Transmission Gates Key Idea: • transistors used in a different configuration • when switched on: instead of connecting output to Vdd or Gnd, they connect output to the input Advantage: • very efficient for implementing switches and multiplexers Disadvantage: • signal degradation unless both NFET and PFET passgates are used in a complementary configuration
Asynchronous Pipelined Processing Pipelining basics Fine-grain pipelining Approach I: MOUSETRAP pipelines
Background: Pipelining fetch decode execute A “coarse-grain” pipeline (e.g. simple processor) A “fine-grain” pipeline (e.g. pipelined adder) What is Pipelining?: Breaking up a complex operation on a stream of data into simpler sequential operations Storage elements(latches/registers) Performance Impact: + Throughput: significantly increased (#data items processed/second) – Latency:somewhat degraded (#seconds from input to output)
Focus of Asynchronous Community Our Focus: Extremely fine-grain pipelines • “gate-level” pipelining = use narrowest possible stages • each stage consists of only a single level of logic gates • some of the fastest existing digital pipelines to date Application areas: • general-purpose microprocessors • instruction pipelines: often 20-40 stages • multimedia hardware (graphics accelerators, video DSP’s, …) • naturally pipelined systems, throughput is critical; input “bursty” • optical networking • serializing/deserializing FIFO’s • string matching? • KMP style string matching: variable skip lengths