1 / 7

PCD-Information

PCD-Information. Application, Economy and Limits of PCD-Tools. Light-Metals Aluminium and its alloys Magnesium and its alloys MMC. What Can Be Machined With PCD ?. Non-Ferrous Metals Brass-Alloys Bronze Copper-Alloys Carbide. Non-Metals Wood Reinforced Plastics Graphite Ceramics.

luisa
Télécharger la présentation

PCD-Information

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PCD-Information Application, Economy and Limits of PCD-Tools General PCD-Information

  2. Light-MetalsAluminium andits alloysMagnesium andits alloysMMC What Can Be Machined With PCD ? Non-FerrousMetalsBrass-AlloysBronzeCopper-AlloysCarbide Non-MetalsWoodReinforced PlasticsGraphiteCeramics Usually it is not possible to work ferrous materials with PCD-tools because of the affinity of carbon to iron ! General PCD-Information

  3. Why Is PCD Economical ? • Extremly High Tool Life (5 - 100 Times Of Uncoated Carbide) • High Finish-Quality (In Form, Deviation and Surface Finish) • High Accuracy Of Size Over Tool Life • Increase Machine Efficiency • Increase Capability • Increase Productivity General PCD-Information

  4. Temperaturecaused by too highcutting data. Limits Of PCD-Tools ! Special Conditions Chip Removalespecially when Drilling. Stress in tool and / or PCD.Graphitisize of PCD.Especially at Plastics:Workpiece and / orchips are melting and stick to the tool. Flutes become congested and therefore :Bad surface finish.Oversize holes.Tool breakage. Condition of spindle res. machine.Vibrations of work-piece in fixture. General PCD-Information

  5. Cutting Data For PCD-Tools General PCD-Information

  6. Cutting Data For PCD-Tools General PCD-Information

  7. Cutting Data For PCD-Tools General PCD-Information

More Related