1 / 7

Gas Chromatography Experiment

Gas Chromatography Experiment. Gas Chromatography. - Gas Chromatography (GC) is a common technique used to separate and identify volatile organic compounds (analytes). As the gas moves the analyte across the stationary phase, the analyte will be in equilibrium with

macaulay-whitehead
Télécharger la présentation

Gas Chromatography Experiment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. GasChromatographyExperiment

  2. Gas Chromatography • - Gas Chromatography (GC) is a common technique used to separate and • identify volatile organic compounds (analytes).As the gas moves the • analyte across the stationary phase, the analyte will be in equilibrium with • the gas and the liquid phase (usually suspended on a solid surface). • This method depends upon the solubilityand theboiling point • of the volatile organic liquid in order to separate them from a mixture. • It’s both a qualitative (identity) and quantitative (how much) tool. • Themobile phase is an inert gas. Commonly used gases include N2, He, • Ar, and CO2, depended on the type of detector. • Thestationary phase is a high-boiling liquid film supported on an inert • solid and packed in either a fused silica (12 to 30 meter) capillary column • or in a copper or stainless steel (1.5 to 3.0 meter) metal column.

  3. GC Instrument Schematic diagram for gas chromatograph

  4. Injection Port • Sample sizes for standard GC procedures typically involve 0.1 to 10.0 microliters of analyte solution injected into a heated sample port. • The needle must be inserted carefully to avoid bending or breaking.

  5. Stationary Phase • The stationary phase can either be polar (polyethylene glycol - PEG) or non-polar (polydimethylsiloxane - PDMS). • For capillary columns, the diameter is typically less than 1 mm, so samples sizes are small. For product separations (not just composition analysis), larger columns can be used in order to isolate milligrams of product.

  6. GC Chromatogram The chromatogram shows: 1. the order of elution (order of components coming off the column) related to boiling points and polarities of the substances in the mixture, 2. the retention time (time of elution), and 3. the relative amount of the components in the mixture.

  7. Experimental Procedure 1. Instead of the acetates listed in the lab manual, we will work with a series of alkanes. The gas chromatogram for these alkanes has already been done. 2. The TA provides only 1-2 drops of the GC unknown. Record the code in your lab notebook. 3. Perform just one run of the unknown. 4. Compare your unknown chromatogram to the posted chromatogram of the mixture containing all “knowns”.

More Related