1 / 8

Other Electrochemical Methods

Other Electrochemical Methods. Electrogravimetric Analysis. If you wanted to test for copper ions in solution (or some other ion), you could make an electrolysis cell. You would then run a current through the electrolytic cell containing the copper ions.

mallorie-vincent
Télécharger la présentation

Other Electrochemical Methods

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Other Electrochemical Methods

  2. Electrogravimetric Analysis • If you wanted to test for copper ions in solution (or some other ion), you could make an electrolysis cell. • You would then run a current through the electrolytic cell containing the copper ions. • This would force the copper ions to “plate” onto the cathode electrode. • The change in mass of the cathode will tell you the original amount of copper ions in solution.

  3. Electrogravimetric Analysis • You do have to have a method to determine whether the reaction is complete. • Sln color change • Fresh cathode has no more copper deposited. • Small aliquot of the sln tests negative for copper.

  4. Coulometric Analysis • In coulometry, a current is run through a solution until a redox rxn is complete. • This is measured with an indicator. • The time it took to complete the reaction is then used to calculate the moles of electrons consumed. • This is then used to calculate the mass of the original analyte. • Problem: If a current of 56.0 mA for 705 s was required to reach the endpoint for the titration of 10.00 mL of a monoprotic acid, what was the molarity of the HA?

  5. Amperometry • In amperometry, the current between 2 electrodes driving an electrolysis reaction is measured. • The voltage is fixed. • The measured current is proportional to the amount of analyte. • Amperometry is used in oxygen monitors, glucose monitors, and other sugars. • A calibration curve of known standards is used to calculate the amount of an analyte.

  6. Voltammetry • Now the current between 2 electrodes is measured while the voltage is changed. • The method of standard addition is used so that a series of graphs is obtained. • The concentration of the analyte is proportional to the peak current obtained from the graph. • This was often used to measure Vitamin C.

  7. Polarography • This is a type of voltammetry. • One of the electrodes is a dropping-mercury electrode. • It has the advantage that mercury is less likely to reduce H+ to hydrogen gas. • Otherwise, the process is similar.

More Related