1 / 21

The Role of Metals in Prosthetic and Orthotic Technology

The Role of Metals in Prosthetic and Orthotic Technology. Ben Hertzberg. Introduction. Prosthesis: replaces part of the body Orthosis: augments part of the body Prosthesis includes: Artificial Limbs Prosthetic Eyes Replacement Joints Facial Prosthesis Artificial Hearts Neuroprosthetics.

marika
Télécharger la présentation

The Role of Metals in Prosthetic and Orthotic Technology

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Role of Metals in Prosthetic and Orthotic Technology Ben Hertzberg

  2. Introduction • Prosthesis: replaces part of the body • Orthosis: augments part of the body • Prosthesis includes: • Artificial Limbs • Prosthetic Eyes • Replacement Joints • Facial Prosthesis • Artificial Hearts • Neuroprosthetics

  3. Important Materials Characteristics • Strength • Stiffness • Fatigue Resistance • Density • Corrosion Resistance • Biocompatibility (more on that later) • Ease of Fabrication • Cost

  4. Chart of Materials Properties

  5. Special Requirements for Specific Technologies • Lower-body prostheses and orthoses will need to support huge amounts of weight • Also need good fatigue resistance • Other characteristics require more precise control • Precise control of elasticity • Low Density is Important

  6. Requirements for Implant Materials • Biocompatibility • Tissue-compatible • Corrosion-resistant • Similar elasticity to nearby tissue • Potential Problems: • Allergic reaction • Toxicity • Other immune system responses

  7. Facial Implants • Miniplates can be used to hold together fractured sections of skull • Biocompatibility is very important because of danger of immune response • Implant can be cemented, press-fitted, or affixed through impaction Facial Implant and X-Ray Picture of Subject

  8. Replacing Large Sections of Bone • Even greater tensile strength is required • Bone/metal interface is difficult • We must ensure there is effective load transfer between bone and implant

  9. Bone/Metal Interface • How do we get bone to grow to and connect with implant metal? • Interfacial loosening is leading cause of skeletal implant failure

  10. Problems With Bone/Metal Integration • Fibrosis – growth of fibrous connective tissue on surface of implant • Fibrosis can interfere with healing damage from implantation surgery • Immune system response • Abrasion of metal Comparison of Fibrosis in Ti Alloys Extracellular Titanium Debris

  11. Osseointegration • Connection between bone and implant • Important materials properties: • Frictional Coefficient • Bio-inert/-active components Progressive growth of bone near Ti implant

  12. Useful Materials: Titanium • Ti-6Al-4V is most common alloy used • High resistance to corrosion • Strong oxide layer that renews itself • More easily shaped and more malleable than steel • Strong general biocompatibility • Stiffness comparable to bone Microstructure of Ti-6Al-4V

  13. Biocompatibility of Titanium • Past evidence suggested that titanium might be dangerous • Causes fibrosis • Metal particles are abraded off • Immune system response detected • Studies show it is safe, however • This opens door for use of titanium in implants Extracellular Titanium Debris Pigmented Cellular Debris

  14. Osseointegration in titanium • TiAlV produces very little fibrous tissue – bone can grow normally • This can be enhanced by use of thin films Comparison of Fibrosis in Ti Alloys

  15. Metallic Thin Films & Osseointegration • Gold-thiol chemistry allows us to attach amino acids to implant surface that encourage bone growth • Using amino acid RGD produces significantly thicker bone shell around implant • Almost 40% greater interfacial shear strength Self-Assembled Monolayer on Gold Femur Cross-Section After Implant Removal

  16. Metallic Thin Films & Osseointegration – Part 2 • Titanium thin films such as Ti-Ca-P-C-O-(N) can also be used to encourage osseointegration • No additional immune response • Little frictional coefficient • Induces growth & serves as anchoring point for osteoblasts and epitheliocytes Dark Spectrum Micrograph of CaP thin film Microstructure of worn CaP thin film

  17. Useful Materials: Magnesium • Lightweight metal with mechanical properties similar to natural bone • Pure magnesium metal oxidizes quickly • This is beneficial because it allows the implant to degrade; however, it happens too rapidly • Mg + rare earths has dramatically reduced corrosion rate - up to 11 months • Subcutaneous gas pockets can be removed via syringe • No evidence suggests magnesium is toxic – high biocompatibility

  18. Magnesium & Osseointegration • Since Mg implants are designed to degrade, they need to be able to allow bone growth • Magnesium can enhance bone growth by itself – evidence is sketchy • Porous magnesium microstructures can enhance osseointegration • Porous magnesium has materials properties that are even closer to bone • Space-holding particles are typically used to produce porous microstructure SEM Micrograph of magnesium with porous microstructure

  19. Futuristic Technologies • Trabacular metal • 80% porous • Uses tantalum, which is highly biocompatible • Allows for high bone ingrowth • High soft tissue attachment

  20. Futuristic Technologies • Scientists have managed to create an prosthetic limb that connects directly to the brain, giving neural control over the limb’s movements & tactile senses

  21. References • http://www.corrosion-doctors.org/Implants/frconten.htm • http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=pubmed&dopt=Abstract&list_uids=12069513&query_hl=1&itool=pubmed_docsum • http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?cmd=Retrieve&db=pubmed&dopt=Abstract&list_uids=16077328&query_hl=5&itool=pubmed_docsum • http://www.lib.umich.edu/dentlib/Dental_tables/toc.html • http://www.ece.mcmaster.ca/~ibruce/courses/EE3BA3_presentation3.pdf • http://www.sciencedirect.com/science?_ob=ArticleURL&_aset=V-WA-A-W-ABY-MsSAYWW-UUW-U-AAVDBWBCWU-AAVVEUVBWU-DEAWCBZDY-ABY-U&_rdoc=1&_fmt=summary&_udi=B6TWB-4J2TSMW-1&_coverDate=05%2F31%2F2006&_cdi=5558&_orig=search&_st=13&_sort=d&view=c&_acct=C000022719&_version=1&_urlVersion=0&_userid=492137&md5=fec4c2772c67d9274dd8291a9bcf7f6d • http://www.sciencedirect.com/science?_ob=ArticleURL&_aset=V-WA-A-W-ABY-MsSAYWW-UUW-U-AAVDBWBCWU-AAVVEUVBWU-DEAWCBZDY-ABY-U&_rdoc=5&_fmt=summary&_udi=B6TWB-4HD8BC2-1&_coverDate=03%2F31%2F2006&_cdi=5558&_orig=search&_st=13&_sort=d&view=c&_acct=C000022719&_version=1&_urlVersion=0&_userid=492137&md5=be8025337f3cb22d93a3627b8efa1593 • http://www3.interscience.wiley.com/cgi-bin/fulltext/30001813/PDFSTART • http://www.zimmer.com/z/ctl/op/global/action/1/id/33/template/MP/navid/294 • http://www.nd.edu/~engineer/publications/signatures/2002/biomaterials.html • http://research.brown.edu/btp/technologies_detail.php?id=1115136426 • http://www.sciencedirect.com/science?_ob=ArticleURL&_aset=V-WA-A-W-D-MsSAYZW-UUW-U-AAVDBWBWAB-AAVVEUVUAB-DEAWVDEVU-D-U&_rdoc=1&_fmt=summary&_udi=B6TWB-3Y2F9B8-F&_coverDate=12%2F31%2F1999&_cdi=5558&_orig=search&_st=13&_sort=d&view=c&_acct=C000022719&_version=1&_urlVersion=0&_userid=492137&md5=aeb4d5b7c53f39972294683f1ca49979 • http://www.sciencedirect.com/science?_ob=ArticleURL&_aset=V-WA-A-W-AUUU-MsSAYZW-UUW-U-AAVDBWBWED-AAVVEUVUED-DEAWVEDUC-AWBA-U&_rdoc=1&_fmt=summary&_udi=B6TWB-4JG5FGW-1&_coverDate=07%2F31%2F2006&_cdi=5558&_orig=search&_st=13&_sort=d&view=c&_acct=C000022719&_version=1&_urlVersion=0&_userid=492137&md5=ba14ab48595fac51b45ce34304896e78

More Related