1 / 7

Charge Preamp with On-Board Cable Driver (IO1195-1-REVA)

Charge Preamp with On-Board Cable Driver (IO1195-1-REVA). Features: +/- 5V power supply. 165 mW power dissipation. Bipolar operation (Q_input = +/- ) Differential outputs for driving 100 ohm twisted pair cable. Large output voltage swing -- +/- 1.5V (cable terminated at both ends)

marilu
Télécharger la présentation

Charge Preamp with On-Board Cable Driver (IO1195-1-REVA)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Charge Preamp with On-Board Cable Driver(IO1195-1-REVA) • Features: • +/- 5V power supply. • 165 mW power dissipation. • Bipolar operation (Q_input = +/- ) • Differential outputs for driving 100 ohm twisted pair cable. • Large output voltage swing -- +/- 1.5V (cable terminated at both ends) • (+/- 3V at driver output) • Low noise: Q_noise = 345e (C_external = 5pF, shaping = .25us) • (Cf = 1pF, Rf = 1meg) • Size = 1.04” x 0.775” 10pins • Preamp output (internal) will operate +/- 2.5V to handle large pile-up.

  2. IO1195-1-REVA

  3. noise1

  4. noise2

  5. TRANSIENT RESPONSE (Qin = .1 pC, no shaping)

  6. TRANSIENT RESPONSE (Qin = 1.6 fC, no shaping)

  7. TRANSIENT RESPONSE (Qin = .5 pC, no shaping)

More Related