1 / 10

Mechanical Advantage

Mechanical Advantage . & Efficiency. advantage of machines. machines help us do tasks; they give us an advantage example : a lever can be used to lift a load if the load is 36N and we only apply 12N of force to lift it, then we can figure out the advantage of the lever

maris
Télécharger la présentation

Mechanical Advantage

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Mechanical Advantage & Efficiency

  2. advantage of machines • machines help us do tasks; they give us an advantage • example: a lever can be used to lift a load • if the load is 36N and we only apply 12N of force to lift it, then we can figure out the advantage of the lever • ie: (36N/12N = 3 X greater)

  3. mechanical advantage • there are 2 ways to look at this advantage: • actual mechanical advantage (AMA) • ratio of load force to effort force (FL/FE) • ideal mechanical advantage (IMA) • ratio of effort arm to load arm (dE/dL) • most machines involve friction, so AMA<IMA

  4. typical IMAs

  5. practice • In an acrobatic demonstration, one person jumps onto the end of a plank (lever). This creates a large effort force of 920 N at the end of the board at a distance of 1.7 m from the fulcrum. A smaller person (460 N) located 3.1 m from the fulcrum, is launched into the air. Calculate: (a) the AMA of the board (b) the IMA of the board

  6. NOTICE • since AMA and IMA are calculated ratios they have no units!!! • (units cancel out)

  7. static and moving components • when a machine is in static equilibrium, the law of the lever applies, so: dE/dL = FL/FE and the IMA equals the AMA • when the components of the machine move, the effort force increases to account for friction, so: dE/dL > FL/FE and the IMA is greater than the AMA

  8. force advantage (AMA) • can be greater than 1, equal to 1, or less than 1

  9. efficiency • the efficiency of a machine tells us how productive it is • percent efficiency is the ratio of actual mechanical advantage to ideal mechanical advantage as a percentage % efficiency = AMA x 100 IMA

  10. practice • Calculate the percent efficiency in each of the following: (a) the distance ratio of a lever is 3.6 and the force ratio is 3.1 (b) the AMA of a wheel and axle is 6.0 and the IMA is 7.0

More Related