1 / 19

USB-Hipro Training Course: Installing and Configuring Digital Hearing Aid Programmer

This training course provides detailed instructions on installing the USB-Hipro software for the digital hearing aid programmer. It covers connecting the USB device to a PC, initiating the installation wizard, and configuring device settings in Device Manager. Participants will learn how to select the correct COM port and successfully run HIPRO tests to ensure functionality. This step-by-step guide ensures that users can efficiently set up their hearing aid programming equipment and troubleshoot common issues.

marrim
Télécharger la présentation

USB-Hipro Training Course: Installing and Configuring Digital Hearing Aid Programmer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. USB-Hipro Training Course ——Marketing Dept

  2. Front view of digital Hearing Aid Programmer USB Rear view of digital Hearing Aid Programmer USB

  3. Connect to the PC by supplied USB (Universal Serial Bus) cable, there will be an interface of “Found New hardware Wizard”.

  4. Place the installation CD in the CD drive. • Select “install the software accords to list or pre-positioned place” on the dialog box ，click “Next”.

  5. Select “Include this location in the search ”, Browse the folder.

  6. Click “next”, the installation will start automatically. (Note: There will be a dialog box when start installing automatically, please select ‘YES’ to confirm it. You need to install the drive twice.

  7. Now there will be a progress indicator frame as the following picture.

  8. Click “Finish ”, the USB-HIPRO is installed successfully.

  9. 1、Connecting the USB-HIPRO to the PC • Go into ‘my computer’ on the computer desktop. • Right click“My Computer”, then select "properties" .

  10. Select the hardware dialog box, click ‘Device Manager’.

  11. Change COM3 to COM1 of USB

  12. Click “properties”

  13. Click “Port Settings” • Click “Advanced”

  14. Change to “COM1”

  15. Click “OK”

  16. 2、HIPRO Test

  17. Click “Test”

  18. HIPRO Test is OK

  19. Thank you !

More Related