1 / 25

What is UV curing system ?

What is UV curing system ?. SOLTECH LTD. Advantages. Energy saving No volatile solvent Very short cure time No heat One pack system Space saving. UV (200~400nm) curing. UV. Photo-initiator P. (free radicals) Free radical + monomer + oligomer Cross linked polymer network.

maxwell
Télécharger la présentation

What is UV curing system ?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. What is UV curing system ? SOLTECH LTD.

  2. Advantages • Energy saving • No volatile solvent • Very short cure time • No heat • One pack system • Space saving

  3. UV(200~400nm) curing UV • Photo-initiator P. (free radicals) • Free radical + monomer + oligomer • Cross linked polymer network

  4. Oligomer • Epoxy acrylate • Urethane acrylate • Polyester acrylate • Acrylic acrylate • Amino acrylate

  5. Epoxy acrylate (1) • Paper coating • Overprint varnish • Wood coating • Ink application (screen , offset) • Solder resist ink Chemical resistance , fast cure and hardness

  6. Epoxy acrylate (2) • BPA epoxy acrylate (Solmer E 120,145,146,1686…) • Paper and wood coating • Acrylate of epoxydized oil (Solmer E 186…) • ink application • Modified epoxy acrylate (Solmer E 1701,1702,1703..) • screen ink , paper and wood • Novolac epoxy acrylate (Solmer E 1626,1636,1656..) • solder resist , hard coating • Acid modified Epoxy Acrylate (Solmer E 1695…) • PSR , metal coating

  7. Urethane Acrylate (1) • Toughness , flexibility , adhesion and non-yellowing • Plastic and film coating • Floor tile coating • Screen ink • PVC floor and wood coating • Adhesive • Anti-fog coating

  8. Urethane Acrylate (2) • Polyester type (Solmer U 584, 594, 580…) • adhesion , toughness • Polyether type (Solmer U 530, 564…) • flexibility , fast cure • Others (Solmer U 522, 522B, 520, 5260…) • fast cure , hardness

  9. Polyester Acrylate • Adhesion , pigment-wetting , low viscosity • Offset and screen ink • Solmer P 236… • Etching resist • Solmer P 270,271,272… • Paper and Wood coating • Solmer P 280,281… • Flexo ink • Solmer P 280,281… • Laminating adhesive • Solmer P 220…

  10. Acrylic acrylate • Adhesion , solvent resist , non-yellowing • Plastic coating • Overprint varnish • Adhesive • Solmer A 345,364,3710

  11. Amino acrylate • Improve UV cure response • Paper and Wood coating • Screen ink • Solmer Z 115, 225

  12. Additive • Silicone Acrylate (Solmer Z 9135, 9136…) • slip and substrate wetting • Adhesion promoter (Solmer Z 9166, 9167) • PCB ink , metal and plastic coating • Non-silicone leveling agent (Solmer Z 9070) • screen ink

  13. Monomer (1) • How to select monomer? • Viscosity and Solubility • Volatility • Odor and toxic property • Reactivity and functionality • Percent of shrinkage

  14. Monomer (2) • Mono : NVP, Styrene, IBXA, PEA… • Di : TPGDA, HDDA, TTEGDA… • Tri : TMPTA, PETA • Others : PE4A, DPHA

  15. Monomer (3) • A : viscosity, reactivity, hardness, gloss, chemical resistance • B: flexibility, solvency, adhesion

  16. Strategy for formulation • 1. Select Oligomer(s) for basic film forming properties • 2. Use Monomer for viscosity control • 3. additives for performance fine tuning • 4. photo-initiator package is critical

  17. General principles • 1.Each component plays a key role in total performance • Formulate for total performance • Optimize on performance requirements • Viscosity control, simple dilution no!

  18. General principles • 2. formulations are sensitive to curing process parameters and equipment • Use controls in experimental design to see effects of external factors

  19. General principles • 3. cost/performance is the key • Raw material costs • Volume dependency • Energy costs • Labor costs • Competitive pricing

  20. Oligomers • Basic film forming properties • Hardness abrasion resistance • Chemical resistance scratch resistance • Flexibility adhesion • Toughness weatherability

  21. Oligomers • Other considerations • Cure speed stability • Cost toxicity • Special properties availability

  22. Monomers • Viscosity reduction • Flexibility (monofunctional) • Crosslinking (multifunctional) • May also increase speed

  23. Additves • Wetting pigment • Flow filler • Slip temperature • resistance • adhesion

  24. Photo-initiator • Cost type of system • Pigment/color processing variables • Film thickness

  25. Application • Wood , paper & board coating • Plastic (PVC floor, ABS, PC,PP) • Adhesive (laminating, PSA) • Ink (screen, wet & dry offset, flexo)

More Related