1 / 16

Electro Dynamics

Electro Dynamics. Fundamentals. Electro Dynamics (cont). Ohm Law (DC)

mccurdyr
Télécharger la présentation

Electro Dynamics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Electro Dynamics Fundamentals

  2. Electro Dynamics (cont) • Ohm Law (DC) • Ohm's law states that the current through a conductor between two points is directly proportional to the potential difference across the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical equation that describes this relationship LM-18 Computer Science SSI Embedded Systems I

  3. Electro Dynamics (cont) • Intuitive Understanding LM-18 Computer Science SSI Embedded Systems I

  4. Electro Dynamics (cont) • Simple DC Circuits LM-18 Computer Science SSI Embedded Systems I

  5. Electro Dynamics (cont) • AC Circuits (follow this web link) • Consider V(t) was Vo sin(2πft+φ) thenI(t) = V(t)/R • In AC circuits we have two other base components: • Inductors • Capacitors LM-18 Computer Science SSI Embedded Systems I

  6. Electro Dynamics (cont) • Inductorsis a passivetwo-terminalelectrical component which resists changes in electric current passing through it. It consists of a conductor such as a wire, usually wound into a coil. When a current flows through it, energy is stored temporarily in a magnetic field in the coil. When the current flowing through an inductor changes, the time-varying magnetic field induces a voltage in the conductor, according to Faraday’s law of electromagnetic induction, According to Lenz's law the direction of induced e.m.f is always such that it opposes the change in current that created it. As a result, inductors always oppose a change in current. LM-18 Computer Science SSI Embedded Systems I

  7. Electro Dynamics (cont) • Inductors (cont) • The relationship between the time-varying voltage v(t) across an inductor with inductance L and the time-varying current i(t) passing through it is described by the differential equation: L mean inductance • If i(t)=I sin(2πft) then When frequency increase Z (impedance), that is equivalent to R, increase, then an inductors is a barrier for high frequency LM-18 Computer Science SSI Embedded Systems I

  8. Electro Dynamics (cont) • Capacitorsis a passivetwo-terminalelectrical component used to store electrical energy temporarily in an electric field.The forms of capacitors contain two electrical conductors separated by a dielectric. When there is a potential difference across the conductors (e.g., when a capacitor is attached across a battery), an electric field develops across the dielectric, causing positive charge +Q to collect on one plate and negative charge −Q to collect on the other plate. If a battery has been attached to a capacitor for a sufficient amount of time, no current can flow through the capacitor. However, if a time-varying voltage is applied across the leads of the capacitor, a displacement current can flow. LM-18 Computer Science SSI Embedded Systems I

  9. Electro Dynamics (cont) • Capacitors (cont)capacitor is characterized by a single constant value, its capacitance. Capacitance is defined as the ratio of the electric charge Q on each conductor to the potential difference V between them.This is the integral form of the capacitor equation. LM-18 Computer Science SSI Embedded Systems I

  10. Electro Dynamics (cont) • Capacitors (cont)RC circuitLet us assume above, that the capacitor, C is fully “discharged” and the switch (S) is fully open. These are the initial conditions of the circuit, then t = 0, i = 0 and q = 0. When the switch is closed the time begins at t = 0 and current begins to flow into the capacitor via the resistor. Since the initial voltage across the capacitor is zero, ( Vc = 0 ) the capacitor appears to be a short circuit to the external circuit and the maximum current flows through the circuit restricted only by the resistor R. Then by using Kirchoff’s voltage law (KVL), the voltage drops around the circuit are given as:V0 – R*I(t) –Vc(t) = 0 LM-18 Computer Science SSI Embedded Systems I

  11. Electro Dynamics (cont) • Capacitors (cont)RC Circuit Charging • Details onRC Circuits ChargingRC Circuits DischargingRC Circuits Var Sign IN • Capacitor Impedance for Sinusoidal Signal IN is LM-18 Computer Science SSI Embedded Systems I

  12. Electro Dynamics (cont) • Capacitors (cont)Two wires separated by a dielectric are a capacitor then: • Cables when transports signals are both capacitors & resistors • From two track on a PCB there is an hidden capacitor LM-18 Computer Science SSI Embedded Systems I

  13. Electro Dynamics (cont) • Conclusions • Increasing frequency: • Inductors Impedance go to high values • Capacitors Impedance go to 0 • Combining Inductors & Capacitors is possible do a passive filter for complex signalsLink for further LM-18 Computer Science SSI Embedded Systems I

  14. Electro Dynamics (cont) • Faraday Neumann Lenz Law • The induced electromotive force in any closed circuit is equal to the negative of the time rate of change of the magnetic flux enclosed by the circuit LM-18 Computer Science SSI Embedded Systems I

  15. Electro Dynamics (cont) • Viceversa a current in a coil, produced by a fem, generate a magnetic field • Fixed current generate a fixed magnetic field, variable current generate a variable magnetic field • Only variable magnetic field induce in a coil or single wire a fem (variable them selves) • Induced fem depend from number of turns, more turns -> more fem LM-18 Computer Science SSI Embedded Systems I

  16. Electro Dynamics (cont) • Transformers • Two closed circuits connected by a magnetic flux • Variable current in first circuit, induce a magnetic flux, this flux induce a fem in second circuit • Fem depend from turns, if turns are differents for two circuits, femin <> femout • Remember: no variable current -> no variable magnetic flux -> no induction -> no fem out Transformers doesn’t work in DC circuits LM-18 Computer Science SSI Embedded Systems I

More Related