1 / 14

Contact Case

Contact Case . Bryan Margaria Jenna Haschets. Cavity. Core. Parting Line. Pin point gate. How we split the mold. Automatic parting line Define Chains Upper for 1-1 Lower for 2-1 Parting surface tool Select feature curve Split Select 1 st and 3 rd islands Extract . 3 plate mold.

megan
Télécharger la présentation

Contact Case

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Contact Case Bryan Margaria Jenna Haschets

  2. Cavity

  3. Core

  4. Parting Line

  5. Pin point gate

  6. How we split the mold • Automatic parting line • Define Chains • Upper for 1-1 Lower for 2-1 • Parting surface tool • Select feature curve • Split • Select 1st and 3rd islands • Extract

  7. 3 plate mold

  8. Runner System

  9. Core Plate

  10. About the mold • Three plate mold • 13 in x 15 in • Pin point gate • Half-Round runner • 2 x 4 cavity layout • Blind pocket • 2 ejector pins on each side of the part

  11. Machine • Demag • model # HT120330 hydraulic • Clamp type • toggle • Clamp force • 120 tons • Clearance between tie bars • 17x17 in • Injection capacity • 14.8 in3

  12. Cost of Part • North East Average $/hr. for 100-299 ton • $40/hr • 30 sec cycle time • 8 parts $40/hr x .0083hr/cycle x 1 cycle/8 parts =$.05 a part

  13. Difficulties • Biggest Difficulties • Splitting the mold • Machine strategist • Designing pin point gate • Spacing of inserts • Tedious • Putting in 32 ejector pins

More Related