1 / 30

CPPM ATLAS Pixel upgrade pour HL LHC LPNHE, Paris 10 octobre 2012 A.Rozanov

CPPM ATLAS Pixel upgrade pour HL LHC LPNHE, Paris 10 octobre 2012 A.Rozanov . IBL construction and installation 2013-2014. IBL Stave-0 final qualification. Stave=0 have been thermally qualified and is under Thermal and pressure cycles

mesther
Télécharger la présentation

CPPM ATLAS Pixel upgrade pour HL LHC LPNHE, Paris 10 octobre 2012 A.Rozanov

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CPPM ATLAS Pixel upgrade pour HL LHC LPNHE, Paris 10 octobre 2012 A.Rozanov Paris-LPNHE 10.10.12 ATLAS pixel

  2. IBL construction and installation 2013-2014 Paris-LPNHE 10.10.12 ATLAS pixel

  3. IBL Stave-0 final qualification • Stave=0 have been thermally qualified and is under Thermal and pressure cycles • Stave TFOM is bellow 17°C cm2/W which is acceptable and within expected values • Power up to 345W on a stave and system permit to maintain the sensor to -15°C which is a good input to prevent thermal runaway Stave fully loaded with modules A-side C-side C-side Paris-LPNHE 10.10.12 ATLAS pixel

  4. Cooling line prototyping • Induction Brazing qualification for PP0 joint is ongoing  Quality still OK, 40 sample brazed and tested: He leaks, visual, thermal shock • Stave extension tests in October • June 2013: 14 staves should be assembled and having all components in hand for 14 staves commissioning. Sealing of the IBL volume for cold tests. Brazed joint metallurgical analysis Induction Chamber PP1 Electrical Break PP0 Ti Sleeve PP1 Ti Fitting Paris-LPNHE 10.10.12 ATLAS pixel

  5. LoI pixel layout • Layout classique – Cylindres barrel et disques • CS IN2P3 21 Juin 2012 • First LoI-phase-II: présentation à AW, Montreux, Octobre 12 • Final LoI phase-II: Janvier 2013 Paris-LPNHE 10.10.12 ATLAS pixel

  6. Inner Pixels • Option: Two IBL-like barrel layers • Tuned to Inner pixels R=4 cm and R=8 cm • Compatible with clamp shell installation • 0.55%X0 Bare stave + 0.03%X0 support = 0.58% X0 A.Rozanov Montreux 2.10.2012

  7. Material per layer A.Rozanov Montreux 2.10.2012

  8. Inner Pixels Front End • FE-electronics with classical sensors, two main options: • 65 nm pixel 25x150 µm • 3D 130nm pixel 50x125 µm • HV CMOS monolithic sensor+electronics 180nm HV2FEI4 ATLAS chip with capacitive coupling to FEI4 subpixel 33x125 µm • More RD on different combinations of HV-HR CMOS, 65 nm, 3D • Test of 65nm chip at CERN PS, excellent results for SEU tolerance, some concern on total dose in shift registers 65 nm prototype A.Rozanov Montreux 2.10.2012 65 nm test pixel matrix

  9. Inner Pixels • FE-electronics: 3D 130nm pixel 50x125 µm A.Rozanov Montreux 2.10.2012 HV2FEI4 demontrator

  10. Inner Pixels • 3D FE-electronics: FE-TC4-P1 test chip pixel 50x166 µm show good results Analog tier Thr=2200e Sthr=150e noise=46e - Digital tier Sthr=174e noise=42e - A.Rozanov Montreux 2.10.2012

  11. Inner Pixels • HV CMOS monolithic sensor+electronics 180nm HV2FEI4 ATLAS chip with capacitive coupling to FEI4 subpixel 33x125 µm A.Rozanov Montreux 2.10.2012 Before irradiation HV2FEI4 demonstrator

  12. HV2FEI4 reached already 375 MRads • Despite degradations at high temperature (42 degC) chip is working • Next round of cold tests at CERN PS at -10 deg C • New more Rad Hard chip in November 2012 Paris-LPNHE 10.10.12 ATLAS pixel

  13. IBL and outer ITK pixels FE-I4 • Test of FE-I4-B SEU - confirms good resistance as expected • Test of General ADC – works up to 375 Mrads • Test of temperature sensor inside FE-I4-B – calibrate as a function of the dose Paris-LPNHE 10.10.12 ATLAS pixel

  14. ATLAS pixel upgrade pour HL LHC • Responsabilités: Positionnement du CPPM • A.Rozanov - chair Joint Pixel-IBL-IB, ITK-SC • A.Rozanov - editor Pixel/Readout ITK LoI Phase-II • E.Vigeolas - responsable stave IBL, SC • E.Vigeolas - ITK local support group, backup document local support Lol Phase-II • J.C.Clémens - coordination électronique 3D IN2P3 • G.Hallewell - coordination group sonar ID • M.Barbero - programme TALENT au CPPM Paris-LPNHE 10.10.12 ATLAS pixel

  15. CPPM: Management • Plan de management: Responsabilités • Stave IBL, Local support ITK - E.Vigeolas • Sonar – Cooling - G.Hallewell • Electronique, via last AIDA -J.C. Clémens • FE-I4 - M.Menouni • FE-TC4 - P.Pangaud • 65 nm - M.Menouni • HV-HR CMOS - P.Pangaud Stave -1 Wire Bonding Paris-LPNHE 10.10.12 ATLAS pixel

  16. CPPM: Ressources humaines Paris-LPNHE 10.10.12 ATLAS pixel

  17. CPPM: Budget Paris-LPNHE 10.10.12 ATLAS pixel

  18. Phase0 en 2013 Paris-LPNHE 10.10.12 ATLAS pixel

  19. Mechanique/cooling PhaseI-II en 2013 Paris-LPNHE 10.10.12 ATLAS pixel

  20. RD electronique PhaseI-II en 2013 Paris-LPNHE 10.10.12 ATLAS pixel

  21. Conclusions Faits marquants • Grand succès de FE-I4-A/B – le plus grand chip hybride HEP au monde • Excellente qualité du tier analogique aminci à 10 µm, cross talks entre deux tiers en électronique 3D • Communication entre tier analogique et digital FE-TC4-P1 (tous les pixels connectés) • IBL sur le planning accéléré de 2 ans • HV2FEI4 fonctionnel et communique avec FE-I4 • HV2FEI4 détecte des particules sur la sortie ampli même après 375 MRads Paris-LPNHE 10.10.12 ATLAS pixel

  22. Spare Paris-LPNHE 10.10.12 ATLAS pixel

  23. Last qualifications steps • The final stave design have been thermally qualified and is under Thermal and pressure cycles • Stave TFOM is bellow 17°C cm2/W which is acceptable and within expected values • Power up to 345W on a stave and system permit to maintain the sensor to -15°C which is a good input to prevent thermal runaway Paris-LPNHE 10.10.12 ATLAS pixel

  24. Chip électronique FE-I4 CPPM • FE-I4 conçu pour l'IBL pour grands taux d'occupation et de résistance aux radiations • Pixels de 250 * 50 µm • Techno IBM 130 nm, testée jusqu'à 400 MRads • FE-I4-A – record de taille HEP: 80 columns×336 rows = 26880 pixels/FE, 20x19 mm , 87 M transistors • FE-I4-B -- retour décembre 2011, premiers tests très positifs- • Contributions design ASIC CPPM: • Registres de configuration (local et global) • Discriminateur basse consommation • Capteur de température • ADC (lecture alims, courant de fuite, température etc) • Multiplexeur analogique • Buffers de lecture des signaux analogiques • Générateur de calibration • Amplificateur opérationnel multi-usage Cooperation IN2P3: Daniel Dzahini (Grenoble) Renaud Gaglione (Annecy) Julien Fleury (LAL) Paris-LPNHE 10.10.12 ATLAS pixel

  25. FE électronique FE-I4 CPPM • Caractérisation et test SEU des registres avec le faisceau de protons PS CERN 5.5 1011 protons/spill Paris-LPNHE 10.10.12 ATLAS pixel Mémoire SEU CPPM

  26. Test of first 3D wafers Two wafers de 3D assemblies arrived CPPM September 2011. Third wafer was diced into chips. Problems with uniformity of the thinning of the upper tier: 15-20% of the wafer surface is defective. Measurements of the resistance of daisy chains and power pads have shown the short circuits between copper surface contacts between two tiers. Few chips without shorts selected. They works, but no communication between tiers established. Problem identified by Tezzaron to be bad wafer alignment at new production facility at Tempe(AZ). The same alignment problem probably creates weak adhesion and non-uniformities during thinning. Next batch of wafers will bonds at facility at Austria in November 2011 with final delivery in spring 2012. Paris-LPNHE 10.10.12 ATLAS pixel

  27. Performance of analog tier from 3D wafer with 10 µm thickness Excellent performance of the analog tier with 10 µm thickness. Paris-LPNHE 10.10.12 ATLAS pixel

  28. 5 columns without any shielding (reference), 4 columns with shielding in metal 5, 2 columns with shielding in metal 3, 2 columns with both shielding. FE-TC4-DS simple digital tier 11 “DRUM” cells (noise generator) “DRUM” cell structure: Digital input (test) or Tier1 output Read-out shift register (1b) Test Shielding strategy : Tested at CPPM lab Paris-LPNHE 10.10.12 ATLAS pixel

  29. Noise and threshold maps after DRUM activated Mapping of threshold no DRUM activated Mapping of threshold with DRUM activated No DRUM ACTIVATED Mapping of noise no DRUM activated DRUM ACTIVATED Mapping of noise with DRUM activated Paris-LPNHE 10.10.12 ATLAS pixel

  30. CPPM: Management • Plan de management: Organigramme projet labo • Responsabilités CPPM ATLAS Pixel Upgrade Mécanique-Refroidissement Electronique Stave IBL Sonar Cooling FE-I4 3D 65 nm HV–HR CMOS ITK support GF Tezzaron AMS 180nm GF 130nm A-B C vialast Paris-LPNHE 10.10.12 ATLAS pixel

More Related