1 / 17

Turning Belaying Pins for the USS Constellation Restoration Project

Turning Belaying Pins for the USS Constellation Restoration Project. Belaying Pin Usage and Design. 2” x 2” x 25” Purpleheart Turning Blank. Find the Center of Each End and Punch a Small Centering Hole. Attach Drive Center to Handle End of Blank Using the Centering Hole.

milo
Télécharger la présentation

Turning Belaying Pins for the USS Constellation Restoration Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Turning Belaying Pins for the USS Constellation Restoration Project

  2. Belaying Pin Usage and Design

  3. 2” x 2” x 25” Purpleheart Turning Blank

  4. Find the Center of Each End and Punch a Small Centering Hole

  5. Attach Drive Center to Handle End of Blank Using the Centering Hole

  6. Blank Mounted Between Centers with Toolrest in Position for Roughing

  7. Rough-Turn the Blank to a Cylinder Using a Roughing Gouge

  8. Blank Partially Roughed Out

  9. Roughed Out Cylinder with Story Stick and Registration Marks

  10. Turn the Shaft Slightly Over-Size. Sand to Final Diameter. Use Template to Verify Diameter

  11. Story-Stick Layout of Handle

  12. Initial Sizing and Clearance Cuts on Handle

  13. Turn Handle End Bead

  14. Handle Fully Developed and Ready For Sanding. Sand Entire Belaying Pin to 320 Grit

  15. Small Tenons Turned on Belaying Pin Ends. Use a Thin Hand Saw or Band Saw to Remove Excess Material

  16. Completed Belaying Pin

  17. Repeat Process “N” Times

More Related