1 / 20

Calorimeter upgrade meeting – CERN – June 22 th 2010

Analog FE ASIC: first prototype Upgrade of the front end electronics of the LHCb calorimeter. E. Picatoste , A. Sanuy, D. Gascón Universitat de Barcelona Institut de Ciències del Cosmos ICC-UB. Calorimeter upgrade meeting – CERN – June 22 th 2010. Outline. Introduction

minna
Télécharger la présentation

Calorimeter upgrade meeting – CERN – June 22 th 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Analog FE ASIC: first prototype Upgrade of the front end electronics of the LHCb calorimeter E. Picatoste, A. Sanuy, D. Gascón Universitat de Barcelona Institut de Ciències del Cosmos ICC-UB Calorimeter upgrade meeting – CERN – June 22th 2010

  2. Outline • Introduction • Current Mode Preamplifier • Integrator • FDOA • Switched Integrator • Linearity • Noise • IC Implementation Details LHCb Upgrade

  3. Introduction • ECAL analogue FE IC: channel architecture Switched integrator Track and Hold First Prototype LHCb Upgrade

  4. Introduction • IC sent: ICECAL Current preamp Integrators LHCb Upgrade

  5. Current mode preamplifier Inner loop: lower input impedance Outer loop: control input impedance • Pros: • “Natural” current processing • Lower supply voltage • All low impedance nodes: • Pickup rejection • No external components • No extra pad • Cons: • Trade-off in current mirrors: linearity vs bandwidth • Low voltage • Only 1 Vbe for the super common base input stage • Better in terms of ESD: • No input pad connected to any transistor gate or base LHCb Upgrade

  6. Current mode preamplifier Possible compensations: • Parallel R • current ladder • Simulations based on the extracted RC |Zin| Zin phase Gain+ Gain- LHCb Upgrade

  7. Current mode preamplifier • Simulations based on the extracted RC: linearity vs. Ii,peak Gain- Gain+ Operation range LHCb Upgrade

  8. Current mode preamplifier • Linearity error after integration (ideal) vs input charge LHCb Upgrade

  9. Integrator • Switched integrator architecture FDOA CMOS switches LHCb Upgrade

  10. FDOA: design Common Mode Feedback • Fully differential Operational Amplifier Folded cascode NPN CE amp RDegenertion Pole compensation LHCb Upgrade

  11. FDOA: open loop post layout simulations • IbCE = 900uA • Load capacitor between 150fF and 5.1pF GLF (dB) BW (KHz) G (dB) GBW (MHz) Phase (º) PM (º) LHCb Upgrade

  12. FDOA: closed loop post layout simulations • IbCE = 900uA • Load capacitor between 150fF and 5.1pF trise (ns) overshoot SR (V/ns) LHCb Upgrade

  13. Integrator: pulse response • Simulations based on extracted RC • Cl = 5pF Vout (V) Vint,ideal (V) Iin (mA) ViD (mV) LHCb Upgrade

  14. Integrator: Linearity • Simulations based on extracted RC • Cl = 5pF Error (%) Vout (V) LHCb Upgrade

  15. Front End simulations (Preamp+integrator) • Simulations based on extracted RC of complete IC • Includes PM signal (TDR) and cable effects PM signal cable Preamp + integrator Clipping line LHCb Upgrade

  16. Front End simulation (Preamp+integrator) • Simulations based on extracted RC of complete IC • Includes PM signal (TDR) and cable effects VPM VoD2 VoD1 Icable (clipped) IPM Vi LHCb Upgrade

  17. Front End simulation: linearity Dynamic deviation of the input impedance LHCb Upgrade

  18. Front End simulation: linearity VoD1 Linear error VoD2 LHCb Upgrade

  19. Front End simulation: noise Noise σ = 377 μV Noise after dynamic pedestal subtraction σ = 479 μV Sampling time t1 • Transient noise analysis Sampling time t2 Integrator 1 output Clock Noise at output: distribution of V(t2) Noise after dynamic pedestal subtraction: distributon of V(t1)- V(t2) LHCb Upgrade

  20. IC Implementation details Downbond • AMS SiGe BiCMOS s35 • QFN package • Substrate connected to central pad (gnd) • When taking into account the bonding parasistics: • 3 * nominal L ⇒ danger of ringing • Solutions: • Include R in series with decoupling capacitor of Vref • Increase number of gnd pins • Downbonds for gnd LHCb Upgrade

More Related