1 / 29

21 Machine Data Capture (MDC)

21 Machine Data Capture (MDC). A Tutorial for Advisers/Key Users.

mitchellkimberly
Télécharger la présentation

21 Machine Data Capture (MDC)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 21 Machine Data Capture (MDC) A Tutorial for Advisers/Key Users

  2. This documentation and training is provided to you by beas gmbh. The documents are neither approved nor in any way acknowledged or endorsed by SAP. For SAP Business One, only the documentation and training officially released by SAP shall be binding upon SAP. SAP shall not be responsible for any content of this documentation and training and this documentation and training shall not be binding upon SAP in any way. The official current SAP Business One documentation and training for SAP Business One is available at http://service.sap.com/sbocustomer/documentation and http://service.sap.com/sbocustomer/training.

  3. Requirements for this Tutorial You will need a good grasp of: • The basics of SAP

  4. Learning targets After working through the lesson, you will be able to: • Setup and manage MDC-devices • Collectandanalyzemachinedata

  5. Agenda MDE Offers the following functions: Machine data capture Read out MDC devices Online status report Blockage overview

  6. Scope of work Bedanet 9080 Quantity Kaba Benzing Bedanet 9080 Scrap Automatic fault report Manual fault report Internal memoryandbuffer Relay output

  7. Layout B-COMM Win32 Server Kaba Benzing Bedanet 9080 Machine B-COMM Server service Online status report be.as Server service Analyses Terminal – Logon/Logoff

  8. Network Bedanet-9080 MDE-Server (Win32-Client) 1 2 be.as- Server service BCOMM- Server service Channel 1 …26 1 BCOMM- Server service be.as- Server service 2 Channel 2 …26 Channel 26

  9. Layout MDC-Client: Win 32 XP DI-Api of SAP Business One >= 2007 BCOMM Win32 be.as 2009 Server With SQL-Server and DI-Api of SAP Busines One >= 2007

  10. Setup – Overview 1 • Wiring of Bedanet 9080 must be performed by an electrician. • Installation of BCOMM-Win32-Software is necessary to assign IP- addresses to the Bedanet 9080 modules. • Bedanet 9080 is configured using WEB-Browser. • A connection diagramm must be drawn including all GID / DID–addresses, names of machines and IP-addresses.

  11. Setup – Overview 2 • Set up GID/DID (Channel and Bedanet-number) in the BCOMM-Win32 software. • This software allows to test the Bedanet 9080. • Define machines and assign GID/DID identifications to resources in be.as. • Configure server service in be.as. One per channel. • Set up automatical call of server service.

  12. Bedanet 9080 - Setup Bedanet-9080- Assignment of an IP-address

  13. Bedanet 9080 - Setup IP-Adresse of the MDC

  14. Bedanet 9080 - Setup Server-IP 192.168.2.27

  15. Bedanet 9080 - Setup Number of Counter: 1 or 2 Machine: 8 digit–string. 8 digits are mandatory. Send on machine clock: set at least to 2 or higher Send interval in ms: depending on bandwith, set to 2000 (=2 sec) or higher

  16. Bedanet 9080 - Setup Define how long the delay may take before it is considered to be a disfunction. From that moment on, only scrap is counted. Measure is msec. Settings are effective after saving and restart of the MDC device

  17. Setup B-COMM - Interface B-COMM-Server is started by be.as. The interface must be configured accordingly.

  18. Be.as setup Setup of Resources Machines Channel

  19. Setup be.as Machines Setup of

  20. Setup the be.as interface Channel Setup of

  21. be.as B-Comm-Server Server BCOMM – be.as Stream 0 Each channel has its own window

  22. be.as B-Comm-Server

  23. Online status view

  24. Protocol

  25. Connection between MDC und FDC Counter is reset at logon Counter is read out at logoff

  26. Tool – Utility factor Change in tools and utility factor is transmitted to the MDC within 10 seconds

  27. Setup server – automatic startup Batch file for automatic startup of be.as server // wait 20 seconds, if current station is the sql-server ping 127.0.0.1 –n 20|echo // start beas-benzingserver-window c: cd c:\program files\beas software\beas beas.exe benzingserver=0 This batch file can be called up automatically when the server starts.

  28. Summary Now you can: • Set up MDC-devices • Set up BCOMM-WIN32 for be.as • Set up be.as – BCOMM interfaces • Collect and analyze machine data

  29. Thank you for your cooperation!

More Related