SlideServe
Menu
Préférences
© SlideServe · v2026

November 2004 Task Force Meeting Summary on Sector Module Testing and Assembly Progress

mohammad-wilder avatar
4 diapositives · 162 Views · Nov 11, 2014

This document summarizes the outcomes of the Task Force Meeting held on November 25, 2004. It details the status of various module assemblies (9005–9010) used for testing and qualification processes, including thermal imaging, electrical tests, and thermal cycling. It highlights the completion of surveys and testing initiatives, noting that 1st production, assembly, and survey activities are progressing well, while also addressing challenges like grounding issues and manpower limits. Plans for increasing assembly rates, along with expectations for upcoming assemblies before the Christmas break, are outlined.

November 2004 Task Force Meeting Summary on Sector Module Testing and Assembly Progress - slide 1
01 / 4November 2004 Task Force Meeting Summary on Sector Module Testing and Assembly Progress
1 / 17

Télécharger la présentation

November 2004 Task Force Meeting Summary on Sector Module Testing and Assembly Progress
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Sector Status Module Loading Task Force Meeting November 25, 2004

  2. Sector Summary • 9005 – FE-I2 modules • Used for qualification and extensively tested (system test) • 9000 – FE-I3 bad modules • Used for final tune-up of assembly process • Assembly completed. Survey completed - OK • Preliminary( room T) electrical test done - OK • Thermal imaging, thermal cycling and burn-in to be done • Back in system test for now • 9006 – 1st production unit • Assembly and survey completed on September 24. OK. Thermal OK. • All testing complete. OK. • 9007 • Assembly and survey completed September 30. OK. Thermal OK. • Need to redo digital test cold with improved grounding, otherwise done. • 9008 • Six modules loaded. Survey OK. Testing to start next week • 9009 • Assembly and survey completed on October 19. OK • Not yet tested. • 9010 • Four modules loaded, OK so far

  3. Status • Qualification of second assembly station nearly complete. Survey comparisons with other station done, agreement within few microns. • Expect to start using second station next week for 9011. • Slowly ramp up assembly rate. Limited by manpower and soon module delivery rate. Can add manpower if module rate improves. • Testing fully operational but keep making small improvements. • XTALK cut in discussion with Module Analysis czar • Will shortly start planning to replicate test system to allow faster rate • Expect to have at least one disk worth, eight sectors, assembled before Xmas break.

  4. Planning