1 / 22

Systems, Energy, & Efficiency

Systems, Energy, & Efficiency. EGR 1301: Introduction to Engineering. Systems. System A particular subset of the universe specified in time and space by a boundary (Ch 17, p. 484). System boundary. t initial = start time t final = stop time. Source: Professor Thomas. System Definition.

morey
Télécharger la présentation

Systems, Energy, & Efficiency

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Systems, Energy, & Efficiency EGR 1301: Introduction to Engineering

  2. Systems • System • A particular subset of the universe specified in time and space by a boundary (Ch 17, p. 484) System boundary tinitial = start time tfinal = stop time Source: Professor Thomas

  3. System Definition • Rules the engineer must follow: • Once a system is specified, it cannot be changed midway through a calculation. • The system boundary can be any shape, but it must be a closed surface. It must also be closed (or bounded) in time. • The system boundary can be rigid (defining a volume of space) or it can be flexible (defining an object).

  4. Importance of System Definition Source: Foundations of Engineering, Holtzapple & Reece, 2003

  5. Intensive vs. Extensive • Extensive quantities • Change with size of the system • Intensive quantities • Remain constant, regardless of size X X X X

  6. What is Energy? • “The capacity for doing work” OR • Unit of exchange (Ch 22, p. 572) • Examples: • Electricity  light or heat • Chemical energy in gasoline  torque in car or heat • Natural gas  electricity or hot water Source: Webster’s New Collegiate Dictionary

  7. Units of Energy Source: Foundations of Engineering, Holtzapple & Reece, 2003

  8. 1st Law of Thermodynamics • “Law of Conservation of Energy” • Energy can neither be created nor destroyed • Therefore, energy must be conserved • Energy can only be transformed • Work can be converted into another form of work • Work can be converted into heat • Need to keep track of, or “account” for, these changes

  9. Money Accounting • Can “account” for the money in your bank: • Ex: • Start with $1000 • Pay you $500 for coming to class • Spend $800 on new laptop • How much do you have (i.e. final balance)? Final balance – Initial balance = Deposits - Withdrawals Accumulation = Net input Final balance = Initial balance + Deposits - Withdrawals

  10. Energy Accounting • For any system, the same relationship is true: Final energy – Initial energy = Input - Output Accumulation = Net input State quantities = Path quantities System Boundary Energy in/out (Path Quantities) Accumulated Energy (State Quantities)

  11. State Quantities • Kinetic Energy • Energy associated with motion • Potential Energy • Energy associated with position, either against a field (e.g. gravity or electric field), compressed spring, or stretched rubber band • Internal Energy • Energy associated with atoms, such as temperature, phase changes, or chemical reactions

  12. Path Quantities • Work • Energy flow due to a driving force other than temperature: mechanical (shaft, hydraulic), electrical, photonic (laser, solar PV) • Heat • Energy flow due to temperature: conduction, blackbody radiation • Mass • Energy flow due to mass crossing the boundary: fuel

  13. Universal Accounting Equation • Mathematical version of the accounting equation: • All have the form: Change in kinetic energy Change in potential energy Change in internal energy Change = Energy at tfinal - Energy at tinitial

  14. Universal Accounting Equation • Mathematical version of the accounting equation: • Heat and Mass have the form: Work input = work done on the system from its surroundings Work output = work done by the system to its surroundings Energy added to system – Energy removed from system

  15. Joule’s Experiment tinitial = mass is raised tfinal = after mass falls and propeller and water stop moving System boundary Assume perfect insulation. How are variables related? Source: Foundations of Engineering, Holtzapple & Reece, 2003

  16. 2nd Law of Thermodynamics • Naturally occurring processes are directional • Closely tied to idea of reversibility • Reversible processes have no directionality • Entropy • Ex: balloon, car, office

  17. Energy Conversion • A system converts energy from one form to another • The process is not always perfect Energy Conversion Device (System) Energy In Energy Out Wasted Energy (often heat)

  18. Efficiency • Measure of how well a system can convert energy • Greek letter eta, η

  19. Example • If a system outputs 70,000 J and η = 0.7, what is the input energy? • How much was wasted? J 30,000 J

  20. Cascaded Conversion • Can connect multiple systems together and do several conversions Natural gas Rotating shaft Electricity Light Gas turbine Generator Light bulb E2 E3 η1 η2 η3 E1 E4 Waste 1 (heat) Waste 2 (heat) Waste 3 (heat)

  21. Overall Efficiency • Treat multiple conversions as a single process ηoverall η1 η2 η3 E4 E1 Total waste (heat)

  22. Recap • Systems – boundary (time & space) • Energy – unit of exchange • Intensive vs. Extensive Quantities • State vs. Path Quantities • Universal Accounting Equation • Efficiency • Cascaded systems • Next: examples

More Related