1 / 27

Hazard Control

Hazard Control. IENG 331, Safety Engineering Fall 2009. Assignment. Read Chapter 9 from Brauer Text Do the odd numbered Review Questions P. 109 Due: ?. Hazards. IDENTIFICATION (RECOGNITION) EVALUATION CONTROL Hazards must be attacked in this order .

mostyn
Télécharger la présentation

Hazard Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hazard Control IENG 331, Safety Engineering Fall 2009

  2. Assignment • Read Chapter 9 from Brauer Text • Do the odd numbered Review Questions • P. 109 • Due: ?

  3. Hazards • IDENTIFICATION (RECOGNITION) • EVALUATION • CONTROL Hazards must be attacked in this order

  4. Murphy’s Law: “Whatever Possibly Can Go Wrong, Will” • In spite of one’s best efforts to prevent undesirable events, errors, and misunderstandings, accidents will occur. • Attributed to Captain Ed Murphy • Air Force Engineer, 1949 • Conducted crash tests • Found a strain gage bridge wired incorrectly • “If there is any way the technician can do it wrong, he will” • His team then adopted this law as a challenge and achieved an excellent safety record • Murphy’s Law has become a commonly used expression

  5. Safety Engineering Corollaries of Murphy’s Law (Block, Murphy’s Law . . ., 1980) • A car and truck approaching each other on an otherwise deserted road will meet at the narrow bridge • Hindsight is an exact science • Only God can make a random selection • When all else fails, read the directions • Any system that depends on human reliability is unreliable • If a test installation functions perfectly, all subsequent systems will malfunction • In any calculation, any error which can creep in will do so. Any error in any calculation will be in the direction of most harm. • A fail-safe circuit will destroy others • A failure will not appear until a unit has passed final inspection

  6. Murphy’s Law as a Safety Concept • Our goal in Safety Engineering is to prevent fulfillment of Murphy’s Law • Through planning, design, and analysis, factors that contribute to accidents can be eliminated or reduced • Even though Murphy’s Law sounds pessimistic, it is a motivating safety concept

  7. What is a Hazard? • A condition or changing set of circumstances that presents a potential for injury, illness, or property damage

  8. What is Hazard Control? • Any means of eliminating or reducing the risk resulting from a hazard

  9. Hazard Sources • Planning & Design • Production & Distribution • Maintenance & Repair • Communication

  10. Hazard Sources –Planning & Design • Usually inadvertently, unknowingly, or unintentionally, engineers or planners may create hazards in sites, buildings, facilities, equipment, operations, and environments • Computational errors, poor assumptions, converting units of measure, improper safety factors • Sky Light example

  11. Sources of Hazards –Production & Distribution • Potential unforeseen changes between design and construction • Substitution of materials or fasteners • Substitution of chemicals • Poor packaging

  12. Sources of Hazards –Maintenance & Repair • Insufficient, delayed, improper maintenance • Equipment or operations may be well designed for normal use, but no design consideration was given for installation, maintenance, housekeeping • LOTO – Lock Out Tag Out • Preventative Maintenance, 5S

  13. Preventative Maintenance, 5S • 5S philosophy focuses on effective workplace organization and standardized work procedures. It simplifies your work environment, reduces waste and non-value activity while improving quality, efficiency, and safety. • “All I Really Need to Know I Learned in Kindergarten”, Robert Fulghum • Sort (Seiri) – eliminate unnecessary items from the workplace; red-tag items and move out

  14. 5S Continues 2. Set in order (Seiton) – efficient & effective storage methods; painting floors; outlining work areas & locations; shadow boards; modular shelving & cabinets; “A place for everything and everything in its place” • What do I need to do my job? • Where should I locate this item? • How many of this item do I really need? 3. Shine (Seiso) – Thoroughly clean the work area; daily follow-up cleaning

  15. 5S Continued 4. Standardize (Seiketsu) – Standardize best practice in your work area; allow employee participation in development • Sustain (Shitsuke) – Focus on defining a new status quo and standard of workplace organization; Don’t revert to old ways • Sometimes a 6th “S” is added to represent “Safety”

  16. Sources of Hazards – Communication • Changes in design, operations, procedures are not communicated adequately to those impacted • Consider the four components of communication • Sender • Medium • Message • Receiver • The gulf between the sender and receiver can be great

  17. Principles of Hazard Control • Identification • Evaluation • Control • Engineering Controls • Administrative Controls • Personal Protective Equipment (PPE)

  18. Knowledge & Recognition of Hazards • No one person can be fully knowledgeable about all hazards • Several disciplines and people must work together • Take a systems approach, understand the context • Human • Machine • Materials • Environment • Historical Approach (see next slide) • See OSHA Website: Statistics

  19. Most Frequently Cited OSHA Violations (2006)

  20. Hazard Control Priorities • Eliminate the hazard (engineering) • Reduce the hazard level (engineering or administrative) • Provide safety devices (engineering or administrative) • Provide warnings (administrative) • Provide safety procedures (administrative) • Provide PPE (PPE)

  21. Reducing Hazards • Redundancy • 2 or more parallel subsystems or components • Backup systems or contingency plans • Single Point Failure • A single component or subsystem that can bring down the entire system • Example: Dead car battery • Search for and eliminate

  22. Redundancy vs. Single Point Failure

  23. Safety Devices • Features or controls that prevent people from being exposed to a hazard • Must be automatic • They do not remove the hazard • Examples • Machine guards • Fail-safe devices (e.g., automatic fire doors, dead man switch, air brakes on truck trailers and railcars)

  24. Fail-Safe Devices • Fail-Passive • Reduces system to its lowest energy level • Circuit breaker, fuse, dead man switch • Fail-Active • Keep system energized, but in a “safe mode” • Battery-operated smoke alarm chirps when low • Traffic signal blinks yellow or red on malfunction • Fail-Operational • Allows the system to function safely even when the device fails (e.g. aircraft auto-land controls)

  25. Provide Warnings • How effective are Warnings? See previous lecture.

  26. Procedures • Sets of actions that must be executed • People must learn to use safe procedures • Must be developed and understood before they are used • Safety procedures are just as important as operational procedures

  27. Assignment • Read Chapter 9 from Brauer Text • Do the odd numbered Review Questions • P. 109 • Due: ?

More Related