1 / 19

Implementing Motorware Lab 2c

Implementing Motorware Lab 2c. Error Message during compilation

murphy-stephenson
Télécharger la présentation

Implementing Motorware Lab 2c

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Implementing MotorwareLab 2c Error Message during compilation This project was created using a version of compiler that is not currently installed: 6.2.3 [C2000]. Another version of the compiler will be used during build: 6.1.3. Please install the compiler of the required version, or migrate the project to one of the available compiler versions by adjusting project properties.

  2. 20140907 Motor Parameters defined

  3. Lab 2C 10/09/14 #define USER_MOTOR_RES_EST_CURRENT (3.0) increased from 1.0 #define USER_MOTOR_IND_EST_CURRENT (-3.0) ) increased from -1.0 #define USER_MOTOR_MAX_CURRENT (30.0) Bus Voltage-15.1V #define USER_IQ_FULL_SCALE_VOLTAGE_V (16)

  4. Bus Voltage-15.1V State RoverL

  5. Bus Voltage-15.1V State _ Rs

  6. Bus Voltage-15.1V State_RatedFlux

  7. Bus Voltage-15.1V State Ls

  8. Bus Voltage-15.1V State RampDown

  9. Bus Voltage-15.1V State Idle

  10. Bus Voltage-15.1V

  11. Lab 2C 14/09/14 #define USER_MOTOR_RES_EST_CURRENT (3.0) #define USER_MOTOR_IND_EST_CURRENT (-3.0) #define USER_MOTOR_MAX_CURRENT (30.0) Bus Voltage-48V #define USER_IQ_FULL_SCALE_VOLTAGE_V (48.7)

  12. Run Identify changed to 1 caused Fault LED to switch ON State RoverL

  13. Fault LED activated State_RampUp

  14. Fault LED activated Sate RatedFlux

  15. Fault LED activated State Error

  16. Fault LED activated State Ls

  17. Lab 01 run

  18. Lab 01 LD2 does’t blink Bus Voltage- 48.5V Error

  19. LD2 does’t blink Reduced the RoverL_estFreq_Hz to 75 prompts another error

More Related