1 / 8

11ah Channelization of Korea

11ah Channelization of Korea. Date: November 7 , 20 11. Author: . Abstract. In this submission, we propose a minor change of 11ah channelization of Korea: Shift right by 0.5 MHz the current whole channelization graphic for Korea. 917 [MHz]. 923. 1 MHz. Current:. 2 MHz. 4 MHz.

nathan
Télécharger la présentation

11ah Channelization of Korea

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 11ah Channelization of Korea Date:November7, 2011 Author:

  2. Abstract • In this submission, we propose a minor change of 11ah channelization of Korea: • Shift right by 0.5 MHz the current whole channelization graphicfor Korea 917 [MHz] 923 1 MHz Current: 2 MHz 4 MHz Shift by 0.5 1 MHz Proposed: 2 MHz 4 MHz 917.5 [MHz] 923.5

  3. S1G Unlicensed band in Korea • The unlicensed band 917 MHz – 923.5 MHz is assigned for • RFID devices and Wireless Sensor Networks. • RFID (Radio Frequency IDentification) and USN (Ubiquitous Sensor Network) must share the spectrum in 917 MHz – 923.5 MHz in Korea • IEEE802.11ah belongs in the same category as USN in Korea Slide 3

  4. Channel plan for RFID in 917 – 923.5MHz • 917 – 920.6 MHz • RFID which uses DRM(Dense Reader Mode) has priority • Channel spacing : 600 KHz (CH 2, 5, 8, 11, 14, 17) • Occupied bandwidth ≤ 200 KHz, Maximum Power : 4W EIRP • Frequency offset tolerance : ± 10 ppm • 920.6 – 923.5MHz • Occupied bandwidth ≤ 200 KHz, Maximum Power : 200mW EIRP Slide 4

  5. Sharing conditions for RFID and USN • Channel plan for USN • Occupied bandwidth: No restriction (≤ 6.5MHz ) • Frequency offset tolerance: ±40 ppm • Maximum Power: 10 mW EIRP except RFID tag channels,3 mW EIRP in RFID tag channels • RFID tag channels : CH 1, 3, 4, 6, 7, 9, 10, 12, 13, 15, 16, 18 • Sharing conditions for RFID and USN • LBT (Listen Before Transmission) • Carrier sensing time ≥ 5 ms • Carrier sensing level = -65dBm • Transmission duration ≤ 4 second • Pause duration ≥ 50 ms • Duty Cycle: • Below 2% in 20 sec duration Slide 5

  6. Proposal and Rationale • Proposed channelization gives us one more DRM RFID channel avoidance for all cases of 1/2/4 MHz CH 2 additionally avoided for 1, 2 MHz 1 MHz Proposed: 2 MHz CH 11 additionally avoided for 4 MHz 4 MHz Shift by 0.5 917.5 MHz 923.5 MHz Slide 6

  7. Motion 1 • Do you support the revised channelization of Korea as follows? • Shift right by 0.5 MHz the current whole channelization graphicfor Korea 917 [MHz] 923 1 MHz Current: 2 MHz 4 MHz Shift by 0.5 1 MHz Proposed: 2 MHz 4 MHz 917.5 [MHz] 923.5

  8. References [1] IEEE 802.11-11/1329r1, Motions and SP on Channelization for 11ah [2] IEEE 802.15-10/0505r0, Potential Channel Plan for TG4g SUN in Korean 900MHz band Slide 8

More Related