1 / 85

IP Transmission Technologies

IP Transmission Technologies. email WWW phone... SMTP HTTP RTP... TCP UDP… IP ethernet PPP… CSMA async sonet... copper fiber radio. Hourglass of TCP/IP Protocols. Transmission Technologies. Ethernet (LAN) Copper Fiber Wireless Satellite DVB-RCS

neka
Télécharger la présentation

IP Transmission Technologies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IP Transmission Technologies

  2. email WWW phone... SMTP HTTP RTP... TCP UDP… IP ethernet PPP… CSMA async sonet... copper fiber radio... Hourglass of TCP/IP Protocols

  3. Transmission Technologies • Ethernet (LAN) • Copper • Fiber • Wireless • Satellite DVB-RCS • Point-to-point Leased Line • E1, SDH, DSL,... • Packet-switched • X.25, Frame Relay • ATM • MPLS • QoS

  4. Types of Point to Point Protocols • SLIP over async • Very simple • IP only • Unreliable - no checksum • HDLC over sync • various proprietary versions • frames have checksum • PPP

  5. Link Control Protocol (LCP) Code Identifier Length Data PPP Flag Address Control Protocol LCP FCS Flag Cisco HDLC Flag Address Control Proprietary Data FCS Flag S S S S S DCE DTE S DTE DCE Leased Line V.35 V.35

  6. PPP • “SLIP done right” • Used for synchronous and asynchronous transmission • Extended negotiation mechanism • Multiple protocol support

  7. PPP and OSI model Network Layer IPCP IPXCP others PPP Network Control Protocol Data Link Layer LCP - Link Control Protocol Synchronous or Asynchronous Physical Media Physical Layer

  8. LCP Configuration Options

  9. PAP/CHAP • PAP • Password required • Unencrypted password sent via the link • Allows storage of encrypted passwords • CHAP • Challenge handshake • No passwords sent via the link • Need for storing unencrypted secrets

  10. Selecting a PPP Authentication Protocol PAP 2-Way Handshake Remote Router (SantaCruz) Central-Site Router (HQ) "santacruz, boardwalk" Accept/Reject • Passwords sent in cleartext • Peer in control of attempts username santacruz password boardwalk Hostname: santacruz Password: boardwalk

  11. Selecting a PPP Authentication Protocol CHAP 3-Way Handshake Remote Router (SantaCruz) Central-Site Router (HQ) Challenge Response Accept/Reject • Use “secret” known only to authenticator and peer username santacruz password boardwalk Hostname: santacruz Password: boardwalk

  12. Multilink PPP • Combining physical links into one logical bundle • Result: higher speed and lower latency • MPPP / Bonding • MPPP assembles/disassembles frames on the Data Link Layer • MPPP used for synchronous and asynchronous physical links • Bonding assembles/disassembles on the bit level

  13. Show ppp multilink

  14. X.25

  15. X.25 • 1970s • Data Terminal Equipment (DTE) • Data Circuit-terminating Equipment (DCE) • Packet Switching Exchange (PSE) • DCE provides clock

  16. X.25 topology

  17. Packet Assembler/Disassembler

  18. X.25 Stack

  19. LAPB Frame

  20. X.25 Data Link Control • Point to point full duplex data links • Correction of errors and congestion control • Encapsulation of data in variable length frames delimited by flags • Redundant error correction bits • Sliding window (8 or 128 frames)

  21. X.121 address

  22. X.121 address • Data Network Identification Code (DNIC) • National Terminal Number (NTN)

  23. Packet Level Protocol • Several circuits multiplexed • Sliding window error and congestion control for every VC • Call restriction, charging, QoS, ...

  24. VC Setup • PVC: permanent entry in “routing” table (static), substitute to leased lines • SVC: dynamic entry in “routing” table triggered by an “open” packet and torn down by “close” packet

  25. Frame Relay

  26. Characteristics • Introduced in 1984 but only (significantly) deployed in the late 1980s • L1 and 2 • Packet Switched technology: PVCs and SVCs • Connection-oriented data link layer communication • X.25 “lite”

  27. Differences with X.25 • Less robust • Assumes more reliable medium => • No retransmission of lost data • No windowing • Error control handled by higher layers • Higher performance and transmission efficiency

  28. Frame Relay Topology

  29. DLCI • Data Link Connection Identifier • Uniquely identify circuits • Assigned by service provider • Local significance only (except with LMI)

  30. DLCI

  31. Frame Format

  32. CIR • What you buy with a FR connection • Committed Information Rate • CIR= Committed Burst/Committed Time • Also Maximum Rate

  33. RTR2 RTR3 Frame Relay s0.1-DLCI=110 s0.2-DLCI=110 s0.3-DLCI=130 RTR1 s0.3-DLCI=120 s0.2-DLCI=130 s0.1-DLCI=120

  34. ATM Asynchronous Transfer Mode

  35. Characteristics • Originally designed to transmit voice, video and data over the same network • Cell switching • Each communication is assigned a timeslot • Timeslots are assigned on a demand-basis => asynchronous (as opposed to TDM)

  36. Cells • 53 bytes: 5 byte header + 48 byte payload • Tradeoff between voice world and data world: • Voice needs small payloads and low delay • Data needs big payload and less overhead

  37. ATM

  38. ATM Adaptation Layer (AAL) • Together with ATM layer, equivalent to Data Link layer in OSI model • AAL1: Connection Oriented => Voice and Video • AAL 3,4: Connection Oriented and Connectionless (similar to SMDS) • AAL 5: Connection Oriented and Connectionless for CLIP and LANE

  39. ATM AAL5

  40. ATM Sources

  41. ATM Addresses • ITU-T Standard: E.164 (Telephone #) • ATM Forum defined 20-byte NSAP Addresses for use in private networks • E.164 address used as prefix on NSAP • Mapped to IP addresses by ATM ARP (in CLIP)

  42. ATM QoS • Traffic Contract: peak bandwidth, average sustained bandwidth, burst size , … Similar to FR • Traffic Shaping (end device): Queuing, Buffering • Traffic Policing (switches): Enforces contract

  43. Path Establishment

  44. MPLS Terminology • LDP: Label Distribution Protocol • LSP: Label Switched Path • FEC: Forwarding Equivalence Class • LSR: Label Switching Router • LER: Label Edge Router

More Related