1 / 24

Chapter 5 Server Installation

Chapter 5 Server Installation. NT Server Requirements NT Server File Systems Installation. NT Server Requirements. 32-bit bus computer with an 80486 25 MHz or better processor VGA or better solution monitor High density 3.5 -inch floppy disk CD-ROM drive 16 MB or more memory

nickan
Télécharger la présentation

Chapter 5 Server Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 5Server Installation • NT Server Requirements • NT Server File Systems • Installation

  2. NT Server Requirements • 32-bit bus computer with an 80486 25 MHz or better processor • VGA or better solution monitor • High density 3.5 -inch floppy disk • CD-ROM drive • 16 MB or more memory • One or more hard disk with 148 MB • Network interface card

  3. NT Server File Systems - I • Security: Backup, trust and privilege, etc, • File compression • File size: 64 GB • File activity information: log or journal • File recognition • NTFS • FAT

  4. NT Server File Systems - II • Server domain • One network with many domain • One or more server in the same domain or different one • Server types • Primary domain controller (with security accounts database) • Backup domain controller (two or more servers) • Standalone server (database)

  5. NT Server File Systems - III • Emergency repair disk • drivers • NTFS file system • NT server operating system

  6. Installation Preparation Task - I • List of hardware components • Hardware configuration information (BIOS) • NT server system requirement • What partition to use (C or D) • File system • Name of NT directory • Name of the server

  7. Installation Preparation Task - II • Password for administrator account (less 14 characters) • Type of server • Protocol selection - NetBEUI • Name for the domain • Emergency repair disk

  8. Installation - I • Boot computer with Setup disk 1 in drive A • Put Setup disk 2 in drive A as requested • enter • Enter • Enter • Put Setup disk 3 in drive A as requested • Enter

  9. Installation - II • Enter • Insert Windows NT Server CD_ROM • Enter • F8 • No Changes: The above list matches mu computer • Enter

  10. Installation - III • Enter • Convert the partition to NTFS • Enter • Accept default • Enter • Exhaustive examination • Enter

  11. Installation - IV • Remove CD_ROM and floppy disk • Enter (computer reboot by itself) • Load CD_ROM • OK • Next (Follow the Setup Wizard)

  12. Installation - Licensing • Name: your full name • Organization: CSUS • Next • Registration • Next • 5 per server (Licensing Modes, leave per seat unchecked) • Next

  13. Installation - Server Name & Type • Computer name: CSUSMIS • Next • Type: Primary Domain Controller • Next

  14. Installation - Administrator • Administrator account: less than 14 characters for password • Next • Emergency repair disk: yes • Next

  15. Installation - Software • Default • Next

  16. Installation - Windows NT Setup • Next

  17. Installation - Networking • Wired to the network • Next • Do not check the option to install Microsoft’s Internet Information Server software • Next

  18. Installation - NIC • Start search • Next • NetBEUI protocol (leave other unchecked) • Next

  19. Installation - Network Services • NetBIOS interface • Workstation • Server • Next

  20. Installation - Network Components • Next • Continue • Next

  21. Installation - Network Communications • Next • Type CSUSMIS for computer name • Type MIS_DATA_COM for domain name • Next

  22. Installation - Configuring NT Server - I • Finish • Data & Time tab • Enter current date & time • Time Zone tab • Select proper time zone using scroll box • Close • OK

  23. Installation - Configuring NT Server - I • Insert a blank disk in drive A • OK • Remove the newly created Emergency Repair Disk • Restart computer

  24. Packbell Hardware • IDE CD-ROM (ATAPI 1.2) IDE Controller • Hard disk: ST3660A • No of cylinder: 1057 • No of head: 16 • No of sector: 63 • Size: 520MB • RAM: 640 and 16MB

More Related