1 / 25

Overview of new technologies

Jørgen Bach Andersen, Aalborg University, Denmark. Overview of new technologies. Sven Kuhn, Rasmus Krigslund, Troels B. Sørensen. GSM + UMTS. GSM. Gausssian Minimum Shift Keying (GMSK) Constant envelope modulation, all the information is in the phase. Time domain. Frequency domain.

nikki
Télécharger la présentation

Overview of new technologies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Jørgen Bach Andersen, Aalborg University, Denmark Overview of new technologies Sven Kuhn, Rasmus Krigslund, Troels B. Sørensen

  2. GSM + UMTS

  3. GSM Gausssian Minimum Shift Keying (GMSK) Constant envelope modulation, all the information is in the phase

  4. Time domain Frequency domain No higher frequencies in the case of GSM (except for EDGE)

  5. WCDMA (UMTS) 3G • multiple access is controlled by code division • rapid power control at 1500 Hz • non-constant envelope modulation Uplink. Browsing with a handset Chip rate T=64 ms (0-5 kHz) T=0.5 ms (0-4 MHz)

  6. Measured spectrum from WCDMA base station 0-10 kHz 0-50 kHz Note the dominant 15 kHz common pilot signal, different from the 1500 Hz power control component. Also a weak 100 Hz.

  7. WCDMA (UMTS) 3G By coding the signal is spread over a larger bandwidth with the consequence of having a processing gain equal to the bandwidth ratio. For speech the gain is large, for high data rates it is small. Rapid power control ensures low as possible transmit powers.

  8. GSM900 GSM1800 3G UMTS Handset transmit Handset receive From Gati et al, Duality between uplink local and downlink whole-body exposures in operating networks, IEEE Transact EMC, 2010,52,no4,829-836

  9. LTE 3.9 G ‘Long Term Evolution’ system is the answer to high data rates, for 4G theoretically 1 Gb/s in downlink (from base to user). It is basically different from 3G in access method and modulation. A flexible bandwidth scheduling with bandwidths up to 20 Mb/s. In the OFDM system the bandwidth is divided up into many narrowband subcarriers. Voice is just another type of narrowband data, voice over IP..

  10. Power vs time. Note non-constant envelope, 1 ms pulsing and deep nulls Distribution of subcarriers for data and control LTE is more like GSM than UMTS what power concerns.

  11. Multiple antennas is another new feature in LTE.

  12. WiFi exposure from access points Exposure from handheld devices will be much smaller than from a phone due to the larger distance.

  13. WiFi 2.45 GHz. Uploading a file, two different time resolutions T=1 ms T=1 s

  14. Absorbing people

  15. Measuring whole-body-absorption by real people Incident power density determines whole-body SAR . The closest takes all!

  16. RFID Radio-frequency identification (RFID) is a technology that uses radio waves to transfer data from an electronic tag, called RFID tag or label, attached to an object, through a reader for the purpose of identifying and tracking the object. Some RFID tags can be read from several meters away and beyond the line of sight of the reader. The application of bulk enables an almost-parallel reading of tags.

  17. RFID: Background 1/2 • Usage: Automatic identification • Facilitates mapping from the physical world (objects) to the digital world Picture from: http://www.rfideducationlabs.com/Portals/0/Inbound%20RFID%20Solution04f.jpg

  18. RFID: Background 2/2 • Equipment: • Tags: Cheap transceivers holding a unique ID • Passive: no internal power source • Semi-passive: Internal power source for processing • Active: Internal power source for processing and transmission • Reader: Identifies and interrogates tags Picture from: http://www.impinj.com/Speedway_Revolution_Reader.aspx

  19. RFID: Operation 1/2 • Reader <-> Tag: Reader-Talks-First • Reader initiates session by informing about #available slots • A tag chooses a slot to reply in at random • Tag makes aware of itself in chosen slot • Reader acknowledges (Hand-shake) • Tag replies with ID + potential application specific data • The reader implements an anti-collision protocol for when tags replies in the same slot

  20. RFID: Operation 2/2 • Reader transmits a continuous carrier wave • Passive tags are powered up by the current induced in their antenna • Commands to tags: Special AM modulation of carrier • Tag reply to reader: Backscattered carrier wave Pulse Interval Encoding, PIE

  21. RFID: Typical Signal • Frequency: UHF (865-868 MHz in EU) • Transmission power: 30 dBm (1 Watt, maximum in EU for indoor use) • Tag type: Passive • Ensuring continuous power to tag: • Mod. index of 90% • Pulse Interval Encoded (PIE) symbols • Number of slots per session: 16

  22. Conclusions In terms of average power from mobile phone at head exposure UMTS is widely to be preferred compared with GSM and LTE, orders of magnitude smaller. Most phones accept both 2G and 3G, user may choose. For WIFI exposures are weak due to the distance factor, which also means that the person(s) closest to access point will receive most of the power. RFID is also away from the head, but relatively high power and continuous radiation.

More Related