1 / 25

Chapter 8: Sampling, Standardization & Calibration

Chapter 8: Sampling, Standardization & Calibration. CHE 321: Quantitative Chemical Analysis Dr. Jerome Williams, Ph.D. Saint Leo University. Overview. Standardization & Calibration Sensitivity & Detection Limits. Standardization & Calibration.

oleg-bass
Télécharger la présentation

Chapter 8: Sampling, Standardization & Calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 8: Sampling, Standardization & Calibration CHE 321: Quantitative Chemical Analysis Dr. Jerome Williams, Ph.D. Saint Leo University

  2. Overview • Standardization & Calibration • Sensitivity & Detection Limits

  3. Standardization & Calibration • Calibration determines relationship between analyte response & analyte concentration. • Accomplished using chemical standards.

  4. Standardization & Calibration • Comparison with Standards • Direct comparison (Colorimeters & Titrations) • External Standard Calibration (Least Squares Method)

  5. Figure 8-9 p172

  6. Figure 8-10 p172

  7. Table 8-1 p175

  8. Table 8-2 p177

  9. Table 8-3 p178

  10. Fig 8-9, p.195

  11. Standardization & Calibration • Errors in External Standard Calibration • Blanks are used to correct for many calibration errors. • Ideal blank contains everything except the analyte. • Solvent blank or reagent blank more practical.

  12. Standardization & Calibration • Minimizing Errors in Analytical Procedures • Multivariate Calibration • Saturation, Matrix Modification, & Masking • Internal Standard Methods • Standard Addition Methods

  13. Sensitivity & Detection Limits • Be familiar with the following terms • Analytical & Calibration Sensitivity • Detection Limit • Linear Dynamic Range • Control Chart (including UCL, LCL) • Statistical Control • Validation & GLP

  14. Figure 8-14 p187

  15. Figure 8-15 p189

  16. p189

  17. p189

  18. Figure 8-16 p190

  19. Suggested Problems • HW Set 7: 8.1, 8.2, 8.3, 8.17, 8.26

More Related