1 / 8

Modeling of Natural Fiber-Thermoplastic Composites Manufactured with Molding Processes

Modeling of Natural Fiber-Thermoplastic Composites Manufactured with Molding Processes. Laurent Matuana Workshop: Future of Modeling in Composites Molding Processes Co-Sponsored by NSF, DOE and APC June 9-10, 2004. Natural Fibers-Plastic Composites (NFPCs). 100% input control.

olesia
Télécharger la présentation

Modeling of Natural Fiber-Thermoplastic Composites Manufactured with Molding Processes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Modeling of Natural Fiber-Thermoplastic Composites Manufactured with Molding Processes Laurent Matuana Workshop: Future of Modeling in Composites Molding Processes Co-Sponsored by NSF, DOE and APC June 9-10, 2004

  2. Natural Fibers-Plastic Composites (NFPCs)

  3. 100% input control Raw materials Step 1 Compounding Lack of on-line control Design Step 2 Manufacturing Step 3 Property testing 100% output control End products Bad Feed back Good Feed forward Current State of the Art

  4. Gaps • Limited information on material-process-property relationships for NFPCs, • Process models to predict the flow characteristics of the blends, formation of voids, alignment of fibers, and mechanical properties of NFPCs are almost inexistent, • Analytical models and computational simulation are not extensively used for NFPCs manufactured with molding processes.

  5. Modeling Issues with Natural Fibers • Non-uniform fibers • Difficult to characterize fiber source • Cross-section may be different between fibers and within a single fiber • Single fibers versus fiber bundles, both may be present • Non-rigid fibers • Long flexible fibers • Rigidity can change with temperature, moisture content • Fiber Attrition • Breakage can depend upon temperature, moisture content

  6. Future Directions • Process control and optimization • On line and non-destructive evaluation (NDE) of the properties of NFPCs • Flow visualization of NFPC blends • Process modeling and simulation by process data • Application of numerical analysis methods

  7. Future Directions (cont’d) • Develop a methodology for simulating the flow and other physico-mechanical properties of the composites, • Apply the methodology to evaluate the effects material components and processing conditions on the properties of the composites, • Define the range of applicability and the sensitivity to various input parameters for the methodology developed, • Assess the accuracy of the model and assumptions made in the deductions (i.e., sensitivity of empirical design parameters), • Develop design and manufacturing guides.

  8. Specific Research Trusts to Fill the Gaps • Integration of two different industries: • Forest products industry • Plastic industry • Multidisciplinary research for • modeling of physical phenomena within natural fibers and plastics during processing and use (e.g., adhesion, void formation, fiber alignment, physico-mechanical and flow properties, etc.), • Application of numerical analysis methods to various problems of NFPCs.

More Related