Download
slide1 n.
Skip this Video
Loading SlideShow in 5 Seconds..
Confidential PowerPoint Presentation
Download Presentation
Confidential

Confidential

314 Vues Download Presentation
Télécharger la présentation

Confidential

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Confidential Nakatsugawa Works LOSSNAY Presentation Part Control(LGH-RX5-E)

  2. Contents 1.Lossnay controller PZ-60DR-E Interlocked with Air conditioner (Mr.Slim and others) Interlocked with City Multi MELANS Precautions of M-NET system Other connection method 2.Function setting by dip switch or PZ-60DR-E 3.Lossnay Usage Conditions a) Safety Precautions ( Temperature and humidity ) b) Cold area operation 4.Troubleshooting a) b) c) d) e) f)

  3. Contents 1.Lossnay controller PZ-60DR-E Interlocked with Air conditioner (Mr.Slim and others) Interlocked with City Multi MELANS Precautions of M-NET system Other connection method a) b) c) d) e) f)

  4. TM4 1 2 a) PZ-60DR-E Basic System 1 Lossnay with 1 remote controller (PZ-60DR-E) • Non-polar 2 wires • Lossnay own language • (No M-NET, No-A-Control) Lossnay LGH-RX5-E Power supply PZ-60DR-E remote controller ・ON/OFF ・Fan speed setting (High / Low / Extra Low) ・Ventilation mode (Heat exchange, By-pass, Automatic) ・Weekly timer ・Night purge

  5. TM4 TM4 TM4 (Factory setting: Main) a) PZ-60DR-E Multiple Lossnay with 1 remote controller • Up to 15 Lossnay units can be connected. • 1 Lossnay unit set to ” MAIN” and all others set to “SUB”. • SUB units follow to the Main unit operation. • Remote controller can be connected to either “MAIN” or “SUB” unit. • When Ventilation mode selected to “Automatic”, each Lossnay units decide its mode by own thermistor sensing. • <Additional Info> Refer to Lossnay technical manual page C-11 and C-68. • Power to PZ-60DR-E is provided from the “MAIN” Lossnay unit. • Power to the “SUB” Lossnay units must be provided one by one. • If set to “MAIN” more than 2 units --> Communication error (6608) will be indicated on the remote controller. (No damage on the product.)

  6. a) PZ-60DR-E Operation with 2 remote controllers • The remote controller gives priority to the last touch. • Individual control is not possible. • In case of Multiple Lossnay units, please see previous page. • It is possible to connect remote controller to the “Sub” Lossnay, however the operation follows the “Main”.

  7. a) PZ-60DR-E Function Table • <PZ-60DR-E Additional Info> Refer to Lossnay technical manual page C-8 and C-11. • When turn ON, the selection of “Ventilation mode” and “Fan speed” will return to the condition before turn off. • When power supply is restored after an outage, all modes will return to the condition before the power supply was interrupted. • Simple Timer, Night Purge, Operation Lock, Function Selection, and 24-hour Ventilation are available.

  8. Dot matrix display ON/OFF button Fan speed Adjustment button Return button Enter button Filter button Timer MENU(MONITOR/SET) button CLEAR button “Extra Low” fan speed button (OPERATION button) Set timer buttonssBackrAhead Timer ON/OFF (DAY) button OPERATION buttons sBackrAhead Function selector button a) PZ-60DR-E Display and Setting Button

  9. a) PZ-60DR-E Remote Controller Compatibility LGH-RX5-E LGH-RX4-E TM4 TB5 TM4 TM4 TB5 OK OK OK OK OK NG PZ- 41SLB-E PZ- 52SF-E PZ- 60DR-E PZ-41SLB-E PZ-52SF-E PZ-60DR-E RX4 Full Functions Not connectable Limited Functions No Extra Low fan speed, No weekly Timer, etc RX5 Full Functions • <When the PZ-60DR-E is connected to an LGH-RX4> • The following restrictions (the functions that cannot be used) apply: • Extra low fan speed, 24-hour ventilation, and Night purge functions are not available. (Timer is available) • Using with M-NET is not available. • Fan speed setting by external signal (when CO2 sensor or other equipment is connected) , Remote/local switching and the ON/OFF input are not available. • Pulse signal operation is not available. • Function selection settings from the PZ-60DR-E is not available. • Display for Power Ventilation, Intermittent mode, or for Ventilation Mode Change Recommendation is not shown. PZ-60DR-E, PZ-41SLB-E and PZ-52SF-E cannot be used at the same time.

  10. Contents 1.Lossnay controller PZ-60DR-E Interlocked with Air conditioner (Mr.Slim, MXZ and others) Interlocked with City Multi MELANS Precautions of M-NET system Other connection method a) b) c) d) e) f)

  11. PZ-60DR-E can not be connected. PZ-60DR-E 1 2 TM2 Slim-Lossnay connection cable (Lossnay Enclosed accessory) b) Interlocked with Air conditioner (Mr.Slim) Pattern-A: Without Lossnay remote controller • Mr.Slim remote controller controls both Mr.Slim and Lossnay Mr.Slim outdoor unit Lossnay CN2L Mr.Slim indoor unit • <Additional Info> • Up to 15 Lossnay units can be connected via TM2. (Refer to “part PZ-60DR-E”) • If there are multiple indoor-units, multiple Lossnay can be connected to each CN2L. • Also refer to Losssnay technical manual page C-67. Mr.Slim remote controller

  12. 1 3 TM2 b) Interlocked with Air conditioner (Mr.Slim) Pattern-B: With Lossnay remote controller • Mr.Slim remote controller does not control Lossnay. • PZ-60DR-E can be connected. Mr.Slim outdoor unit PZ-60DR-E Lossnay Mr.Slim indoor unit PAC-SF40RM-E (Optional parts) In case that you want control Lossnay by a Lossnay remote controller, PAC-SF40RM-E is necessary. Mr.Slim remote controller Please see Installation Manual of PAC-SF40RM-E.

  13. b) Interlocked with Air conditioner (Mr.Slim) Function Table • Pattern-A: Without Lossnay remote controller • Pattern-B: With Lossnay remote controller

  14. b) Interlocked with Air conditioner (Mr.Slim) Function setting of Mr.Slim remote controller • Lossnay connectivity setting is required. • Set the functions of each indoor unit from • the Mr.Slim remote controller • Refer to Lossnay technical manual page C-101 • For a detailed description of the factory setting and mode, refer to the Mr.Slim indoor unit installation manual.

  15. TM2 PZ-60DR-E can not be connected. CN2L 1 1 1 2 2 2 Slim-Lossnay connection cable (Lossnay Enclosed accessory) Lossnay PZ-60DR-E TM2 TB580 1 . 2 PZ-60DR-E can be connected. CN560 MAC-397IF-E (Optional parts) Lossnay PZ-60DR-E TM2 TB580 1 . 2 PZ-60DR-E can be connected. CN560 MAC-397IF-E (Optional parts) Lossnay PZ-60DR-E b) Interlocked with Air conditioner (MXZ) • Inverter Multi-Split RAC(MXZ) can be connected to Lossnay RX5 SEZ-KD MXZ outdoor unit SLZ,PLA MXZ Branch Box MSZ,MFZ MXZ Indoor units 1. Model SEZ-KD has CN2L, Lossnay can be connected by using Slim-Lossnay connection cable. 2. Except SEZ-KD , Lossnay can be connected by using MAC-397IF-E. (Please see Installation Manual of MAC-397IF-E)

  16. b) Interlocked with Air conditioner (MXZ) Function setting of Lossnay 1) Without PZ-60DR-E • Lossnay ON/OFF operation follows the Input signal from connected MXZ indoor unit. • Fixed to High-Fan-Speed, Ventilation Mode Automatic. (Low-Fan-Speed can be set by dip-SW) 2) With PZ-60DR-E • Lossnay ON/OFF operation follows the Input signal from connected MXZ indoor unit. • <PZ-60DR-E Additional Info> Refer to Lossnay technical manual page C-78. • When turn ON, the selection of “Ventilation mode”, “Fan speed ”, will return to the condition before turn off. • When power supply is restored after an outage, all modes will return to the condition before the power supply was interrupted. • Simple Timer, Night Purge, Operation Lock, and Function Selection can be set.

  17. 1 1 2 3 and :In case of charged operating signal of 12VDC or 24VDC :In case of uncharged a-contact signal TM2 and Lossnay b) Interlocked with Air conditioner (others) • Lossnay ON/OFF operation follow the input signal from external device. • Fixed to High-Fan-Speed,Ventilation Mode Automatic. (Fan speed can be set as Low by dip-SW) Outdoor unit ・ Input of Level signal and Pulse signal (12VDC,24VDC, unchanged a-contact) is possible. ・ Level or pulse signal can be set by dip-SW ・ Interlocked operation mode is selectable (Detail info please see part Other connection method) External device (indoor unit) remote controller • Details are explained later part

  18. PZ-60DR-E TM4 1 1 1 2 2 3 b) Interlocked with Air conditioner (others) outdoor unit PZ-60DR-E can be connected external device (indoor unit) and TM2 and remote controller Lossnay

  19. b) Interlocked with Air conditioner (others) Function setting of Lossnay 1) Without PZ-60DR-E • Lossnay ON/OFF operation follows the Input signal from the external device. • Fixed to High-Fan-Speed, Ventilation Mode Automatic. (Low-Fan-Speed can be set by dip-SW) 2) With PZ-60DR-E • Lossnay ON/OFF operation follows the Input signal from the external device. • <PZ-60DR-E Additional Info> Refer to Lossnay technical manual page C-78. • When turn ON, the selection of “Ventilation mode”, “Fan speed ”, will return to the condition before turn off. • When power supply is restored after an outage, all modes will return to the condition before the power supply was interrupted. • Simple Timer, Night Purge, Operation Lock, Function Selection, and 24-hour Ventilation can be set.

  20. Contents 1.Lossnay controller PZ-60DR-E Interlocked with Air conditioner (Mr.Slim and others) Interlocked with City Multi MELANS Precautions of M-NET system Other connection method a) b) c) d) e) f)

  21. Example; ME remote controller (PAR-F27MEA) ME remote controller (PAR-F27MEA) 051 Indoor unit Outdoor unit TB3 TB5 TB5 TB5 002 003 001 Group2 Group1 102 101 TB5 TB5 TB5 004 005 006 Group5 Group4 Group3 106 105 104 154 c) Interlocked with City Multi What is M-NET System ?

  22. c) Interlocked with City Multi Definition 1) Interlock - Interlocked Lossnay units can be controlled by MA or ME remote controller and AG-150A. - Lossnay remote controller is not necessary. - One Lossnay unit can be interlocked with maximum 16 units of Indoor Unit. 2) Group A) Grouping; - Multiple Indoor-Units(Max 16 units) can be set in a Group. - Multiple Lossnay-Units can be set in a Group. (PZ-60DR-E: Max 15 Lossnay units, PZ-52SF-E: Max 16 Lossnay units) - Indoor unit(s) and Lossnay-Unit(s) cannot be set in the same Group. B) Group setting B-1) Indoor units… - MA-remote controller (PAR-F21MAA); Grouping via cross-over wire directly. - ME-remote controller (PAR-F27MEA); Group setting by ME-remote controller is needed. - If there is an AG-150A ; Group setting by AG-150A is needed. B-2) Lossnay units… - Lossnay remote controller (PZ-60DR-E) : Grouping via cross over wire directly. - Lossnay M-NET remote controller (PZ-52SF-E); Group setting by PZ-52-remote controller is needed. - If there is an AG-150A ; Group setting by AG-150A is needed.

  23. Lossnay 051 Outdoor unit 001 TB5 007 Interlocked c) Interlocked with City Multi Lossnay Interlock example-1 ME remote controller (PAR-F27MEA) Indoor unit TB3 002 003 TB5 Group2 Group1 Group1 1 indoor unit and 1 Lossnay in interlocked operation. Lossnay not belong to a Group. 102 101 004 005 006 Group5 Group4 Group3 105 106 104 154 • Interlocked Lossnay (007) unit can be controlled by ME remote controller (101). • How to interlock is explained later.

  24. 051 Outdoor unit 001 TB5 TB5 008 007 TB5 Interlocked Interlocked Group1 101 c) Interlocked with City Multi Lossnay Interlock example-2 ME remote controller (PAR-F27MEA) Indoor unit Lossnay TB3 002 003 Group2 102 Group2 Multiple indoor units and 1 Lossnay in interlocked operation. It is possible to operate 16 indoor units per 1 Lossnay 004 005 006 Group5 Group4 Group3 105 106 104 154 Interlocked Lossnay (008) unit can be controlled by ME remote controller (102).

  25. 051 Lossnay Outdoor unit 001 TB5 007 TB5 Interlocked Group1 101 TB5 009 Interlocked c) Interlocked with City Multi Lossnay Interlock example-3 ME remote controller (PAR-F27MEA) Indoor unit Group3 1 indoor unit with 2 remote controllers and 1 Lossnay in interlocked operation TB5 008 002 003 Interlocked Group2 102 004 005 006 Group5 Group4 Group3 105 106 104 154 Interlocked Lossnay (009) unit can be controlled by ME remote controller (104, 154).

  26. 051 Lossnay Outdoor unit 001 TB5 007 TB5 Interlocked Group1 101 TB5 010 Interlocked c) Interlocked with City Multi Lossnay Interlock example-4 ME remote controller (PAR-F27MEA) Group4, 5 Multiple groups and 1 Lossnay unit in interlocked operation. It is possible to operate 16 group/unit per 1 Lossnay. Indoor unit TB5 008 002 003 Interlocked Group2 102 TB5 009 004 005 006 Interlocked Group5 Group4 Group3 105 106 104 154 Interlocked Lossnay (010) unit can be controlled by ME remote controller (105, 106).

  27. 051 Lossnay Outdoor unit TM4 TM4 TM4 TM4 Lossnay remote controller (PZ-60DR-E) can be connected by TM4. c) Interlocked with City Multi Lossnay Interlock example summery (ME) ME remote controller (PAR-F27MEA) Indoor unit TB3 TB5 TB5 TB5 002 003 001 007 008 Interlocked Interlocked Group2 Group1 102 101 TB5 TB5 004 005 006 010 009 Interlocked Interlocked Group4 Group3 105 106 104 154

  28. 051 Lossnay Outdoor unit Lossnay M-NET remote controller (PZ-52SF-E) can be connected by TB5. (Group setting by PZ-52SF-E is needed.) c) Interlocked with City Multi Lossnay Interlock example summery (ME) ME remote controller (PAR-F27MEA) Indoor unit TB3 TB5 TB5 TB5 002 003 001 007 008 Interlocked Interlocked 108 107 Group2 Group1 102 101 TB5 TB5 004 005 006 009 010 Interlocked Interlocked 109 110 Group4 Group3 105 106 104 154

  29. c) Interlocked with City Multi Interlock registration (In case of PAR-F27MEA) By using Initial setting mode of ME remote controller, Lossnay interlock registration is possible. Refer to Lossnay Technical manual Page C-103. Registration procedure is basically same both ME and MA remote controller.

  30. c) Interlocked with City Multi In case of Lossnay Interlock forMA System

  31. c) Interlocked with City Multi Group setting for MA System MA remote controller PAR-21MAA 000 Indoor unit Outdoor unit TB3 TB5 000 000 000 TB15 Group2 Group1 000 000 000 Group4 Group3 In case of MA remote controller, Grouping via cross-over wire directly (No need set address ).

  32. Lossnay 007 008 Interlocked Interlocked TB5 009 010 Interlocked Interlocked c) Interlocked with City Multi Lossnay Interlock for MA System MA remote controller PAR-21MAA Indoor unit 051 Outdoor unit TB5 TB5 002 003 001 Group2 Group1 TB5 004 005 006 Group4 Group3 In case of MA remote controller Lossnay Interlock, address setting and interlock setting from PAR-21MAA is needed. (Refer to PAR-21MAA Technical manual)

  33. Lossnay TB5 TB5 002 003 001 007 008 Interlocked Interlocked TM4 TM4 TB5 TB5 004 005 010 009 Interlocked Interlocked TM4 TM4 Lossnay remote controller (PZ-60DR-E) can be connected by TM4. c) Interlocked with City Multi Lossnay Interlock for MA System with PZ-60DR-E MA remote controller PAR-21MAA Indoor unit 051 Outdoor unit Group2 Group1 006 Group4 Group3

  34. Lossnay Outdoor unit Lossnay M-NET remote controller (PZ-52SF-E) can be connected by TB5. (Group setting by PZ-52SF-E is needed.) c) Interlocked with City Multi Lossnay Interlock for MA System with PZ-52SF-E MA remote controller PAR-21MAA Indoor unit 051 TB5 TB5 002 003 001 007 008 Interlocked Interlocked 108 107 Group2 Group1 TB5 TB5 004 005 006 010 009 Interlocked Interlocked 109 110 Group4 Group3

  35. c) Interlocked with City Multi Function Table (ME & MA) ME remote controller (PAR-F27MEA) MA remote controller (PAR-21MAA) If the power supply was interrupted for the Indoor unit, Interlocked Lossnay will stop operation after few minutes.

  36. Contents 1.Lossnay controller PZ-60DR-E Interlocked with Air conditioner (Mr.Slim and others) Interlocked with City Multi MELANS Precautions of M-NET system Other connection method a) b) c) d) e) f)

  37. d) MELANS Function overview PZ-52SF-E(Lossnay M-NET Remote controller)

  38. 1 2 d) MELANS Function overview AG-150A(City Multi Centralized controller) 1) Air conditioning unit group screen Lossnay

  39. 1 3 2 5 6 4 7 d) MELANS Function overview AG-150A 2) Ventilation equipment (Lossnay) group screen

  40. d) MELANS Function overview AG-150A 2) Ventilation equipment (Lossnay) group screen

  41. d) MELANS Function Table

  42. 000 Outdoor unit TM4 d) MELANS Lossnay Interlock and Lossnay Group System with PZ-60DR-E System controller AG-150A 051 Indoor unit Lossnay ME remote controller Lossnay remote controller PZ-60DR-E TB5 TB5 001 003 005 004 002 Power Supply Unit Interlocked Interlocked 101 103 Group2 Group1 TB5 TB5 TB5 TB5 TB5 007 008 006 009 010 TM4 TM4 TM4 Group4 Group5 Group3 Group1 and 2; Lossnay Interlock Group3, 4 and 5; Lossnay independent Group

  43. 000 Outdoor unit d) MELANS Lossnay Interlock and Lossnay Group System with PZ-52SF-E System controller AG-150A 051 Indoor unit Lossnay ME remote controller Lossnay remote controller PZ-52SF-E TB5 TB5 001 003 005 004 002 Power Supply Unit Interlocked Interlocked 101 103 Group2 Group1 TB5 TB5 TB5 TB5 TB5 010 006 007 008 009 106 108 158 Group4 Group5 Group3 Group1 and 2; Lossnay Interlock Group3, 4 and 5; Lossnay independent Group

  44. 000 Outdoor unit TM4 TM4 d) MELANS Lossnay Group System 1 System controller AG-150A 051 Indoor unit Lossnay ME remote controller Lossnay remote controller PZ-60DR-E Group3 (Lossnay Independent) 1 Lossnay unit and 1 PZ-60DR-E TB5 TB5 001 003 005 004 002 Power Supply Unit Interlocked Interlocked 101 103 Group2 Group1 TB5 TB5 TB5 TB5 TB5 007 006 008 009 010 TM4 TM4 Group4 Group5 Group3 Lossnay unit (006) can be controlled by PZ-60DR-E which is connected to the Lossnay (006) and System controller (AG-150A)

  45. 000 Outdoor unit TM4 TM4 d) MELANS Lossnay Group System 2 System controller AG-150A 051 Indoor unit Lossnay ME remote controller Lossnay remote controller PZ-60DR-E • Group 4 (Lossnay Independent) • Lossnay unit without PZ-60DR-E • Group setting from System controller is required TB5 TB5 001 003 005 004 002 Power Supply Unit Interlocked Interlocked 101 103 Group2 Group1 TB5 TB5 TB5 TB5 TB5 007 006 008 009 010 TM4 TM4 Group4 Group5 Group3 Lossnay unit (007) can be controlled by System controller (AG-150A).

  46. 000 Outdoor unit TM4 TM4 d) MELANS Lossnay Group System 3 System controller AG-150A 051 Indoor unit Lossnay ME remote controller Lossnay remote controller PZ-60DR-E Group5 (Lossnay Independent) Multiple Lossnay units and 2 PZ-60DR-E (It is possible to set maximum of 16units in 1 Group) TB5 TB5 TB5 001 003 005 004 002 Power Supply Unit Interlocked Interlocked 101 103 Group2 Group1 TB5 TB5 TB5 TB5 TB5 007 006 008 009 010 TM4 TM4 Group4 Group5 Group3 Lossnay units (008 - 010) can be controlled by PZ-60DR-E and System controller (AG-150A).

  47. 000 Outdoor unit d) MELANS Lossnay Interlock and Lossnay Group Summery System controller AG-150A 051 Indoor unit Lossnay ME remote controller Lossnay remote controller PZ-60DR-E TB5 TB5 001 003 005 004 002 Power Supply Unit Interlocked Interlocked 101 103 Group2 Group1 TB5 TB5 TB5 TB5 TB5 007 006 TM4 008 009 010 TM4 TM4 TM4 Group4 Group5 Group3 Group setting and Interlock setting from AG-150A are required.

  48. 000 d) MELANS System example AG-150A + Lossnay-group Systems without Indoor-units System controller Lossnay remote controller (PZ-60DR-E) Lossnay TB5 TB5 TB5 TB5 TB5 TB5 001 002 005 006 003 004 TM4 Power Supply Unit TM4 TM4 TM4 TM4 Group3 Group4 Group2 Group1 TB5 TB5 • Each Lossnay Group can be controlled by • PZ-60DR-E in the Group. • Group1 to Group5 can be controlled by System • controller (AG-150A) independently. • Power supply unit is required TM4 007 008 TM4 Group5

  49. Contents 1.Lossnay controller PZ-60DR-E Interlocked with Air conditioner (Mr.Slim and others) Interlocked with City Multi MELANS Precautions of M-NET system Other connection method a) b) c) d) e) f)

  50. e) Precautions of M-NET system Basic rule is same as City Multi system. Power supply of the M-NET transmission cable The central system The indoor unit system TB5 TB5 TB5 TM4 Supply 24VDC signal by Power supply unit Supply 24VDC signal by outdoor unit Refer to Lossnay Technical manual Page C-31.