1 / 22

MET 103

MET 103. Module 5 Milling Machines. What is milling. Milling is the process of machining flat, curved, or irregular surfaces by feeding the workpiece against a rotating cutter containing a number of cutting edges .

orsen
Télécharger la présentation

MET 103

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MET 103 Module 5 Milling Machines Dr. Salah Gasim Ahmed MET 103

  2. What is milling Milling is the process of machining flat, curved, or irregular surfaces by feeding the workpiece against a rotating cutter containing a number of cutting edges. A milling machine uses on or more revolving cutters to shape a work piece. Dr. Salah Gasim Ahmed MET 103

  3. Types of milling machines: • Vertical milling machines • Turret (head can be tilted or swiveled) • Fixed head (head can not be tilted or swiveled) • Horizontal milling machines • Plain horizontal milling machines (table is fixed at right angle to the knee) • Universal milling machines (the table can be pivoted in a horizontal plane) • Milling machines for special purposes Dr. Salah Gasim Ahmed MET 103

  4. Ram Milling head Spindle Table Saddle Column Knee Base

  5. Spindle Arbor support Ram (or over arm) Table Column Saddle Knee Base

  6. Milling machine attachment and accessories There are three classes of accessories: • Those which increase the versatility of the milling machine e.g.: • Vertical milling attachment • Slotting attachment • Those which holds the cutter • Those which holds the work piece Dr. Salah Gasim Ahmed MET 103

  7. Arbor • Used for mounting the cutter • It is held in the main spindle by a draw bolt • The outer end is supported by the arbor support • The cutter is positioned on the arbor by collars • Collet adaptor • It is held in the spindle the same manner as the arbor • It is used for mounting tools with taper shank • Quick change adaptor • Used for holding wide range of cutting tools Cutter holding devices: Dr. Salah Gasim Ahmed MET 103

  8. Arbor installation

  9. Spring collet

  10. Quick-change adaptor and tool holder Collet chuck chuck

  11. Work holding devices: • The most common types are: • Vises • V-blocks • Mainly used for round works • Angle plates • They are used for large works or special shapes • Fixtures • They are made to hold a particular work piece • Indexing head (dividing head) • It permits the cutting of gears, ratchets, bolt heads • Clamps

  12. Vises • Plain vise • Jaws parallel or at right angle to the spindle axis • Swivel base vise • it can swivel in a horizontal plane • Universal vise • it can swivel in a horizontal plane,3600, and can be tilted 0 – 900 in a vertical plane

  13. Clamps When work can not be held in a vise or a fixture it is clamped on the table. Here are some types of clamps: • Straight clamp • Finger clamp • Double finger clamp • Screw clamp • U-clamp • Goose neck clamp • Universal clamp

  14. Indexing head

  15. Milling cutters There many types of milling cutter. Here are some examples: • Plain milling cutter • Plain slitting cutter • Shell milling cutter • Side milling cutter • End milling cutter • Gear milling cutter • T-slotting cutter • Dove-tail slotting cutter

  16. Cutting speeds, feeds and depth of cut: Factors for determining speed (rpm) • Type of work material • Cutter material • Diameter of cutter • Surface finish • Depth of cut • Rigidity of machine and work setup

  17. The spindle speed • (inch) • (metric) The Value of CS is taken from table(1)

  18. Milling feed • Feed = N x cpt x rpm • Where, • N: Number of teeth in milling cutter • cpt: chip per teeth for particular cutter, see table (2). • rpm revolution per minute of the cutter

  19. Table (1) Milling Machine Cutting Speeds Table (2) Recommended Feed Per Tooth (HSS Cutters)

  20. Safety precautions for milling machines • Wear safety goggles • Clean and dry the table before mounting the work holding device • Clean and dry the holding device and work piece • Mount the work piece securely • Select and mount the proper cutter to revolve in the proper direction • Clean and dry arbor cutter and collars • Use only correctly fitting wrenches on the machine • Tighten or loosen the arbor nut only with the arbor support in place (otherwise the arbor may bend) • Use the proper spindle speed, feed and depth of cut

  21. Make certain that the table holding device and work piece will clear the arbor and its support during the cut. • Disengage the manual feed hand wheel when automatic feed is to be used. • Make sure that unauthorized persons are outside the safety zone of the machine when it is started. • Keep clear of the revolving cutter • Stop the cutter to remove chips and use a brush for chip removal • Release the automatic feed control when the job is completed. • Keep floor free of chips , oil and grease • When you finish working return all tools, accessories and brush the machine free of chips.

More Related