1 / 9

Lab. 6 BCD to 7-segment display

Lab. 6 BCD to 7-segment display . BCD inputs are decoded by 7447 and display on 7-segment duaplay. Decoder and display. Seven segment display. 7447 Pin assignment. Active Low . Note.

osbourne
Télécharger la présentation

Lab. 6 BCD to 7-segment display

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lab. 6 BCD to 7-segment display BCD inputs are decoded by 7447 and display on 7-segment duaplay

  2. Decoder and display

  3. Seven segment display

  4. 7447 Pin assignment

  5. Active Low

  6. Note Note 1: BI/RBO is wire-AND logic serving as blanking input (BI) and/or ripple-blanking output (RBO). The blanking input (BI) must be open or held at a HIGH level when output functions 0 through 15 are desired, and ripple-blanking input (RBI) must be open or at a HIGH level if blanking or a decimal 0 is not desired. X = input may be HIGH or LOW. Note 2: When a LOW level is applied to the blanking input (forced condition) all segment outputs go to a HIGH level regardless of the state of any other input condition. Note 3: When ripple-blanking input (RBI) and inputs A0, A1, A2 and A3 are LOW level, with the lamp test input at HIGH level, all segment outputs go to a HIGH level and the ripple-blanking output (RBO) goes to a LOW level (response condition). Note 4: When the blanking input/ripple-blanking output (BI/RBO) is OPEN or held at a HIGH level, and a LOW level is applied to lamp test input (LT), all segment outputs go to a LOW level.

  7. Connection of 7447 and 7-segment display

More Related