1 / 12

Annie Egan Supervisors: Dr Mike Dennis Dr Paul Bannister, Exergy Australia

Why worry about the accuracy of building simulation in predicting the energy efficiency of Australian office buildings. Annie Egan Supervisors: Dr Mike Dennis Dr Paul Bannister, Exergy Australia Dr Keith Garzoli Dr Keith Lovegrove. What is building simulation?.

owena
Télécharger la présentation

Annie Egan Supervisors: Dr Mike Dennis Dr Paul Bannister, Exergy Australia

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Why worry about the accuracy of building simulation in predicting the energy efficiency of Australian office buildings Annie Egan Supervisors: Dr Mike Dennis Dr Paul Bannister, Exergy Australia Dr Keith Garzoli Dr Keith Lovegrove

  2. What is building simulation? • Computer-based modeling of a building • Evaluates all energy flows and the interactions between them over a typical weather year • Calculates heating and cooling loads, and transfer of heat between building zones at each hour through the year • These calculations include consideration of: • lighting • plug-in equipment • occupancy • building fabric • building geometry • HVAC systems.

  3. Commonly used building simulation packages • IES (Integrated Environmental Solutions) Virtual Environmental • AccuRate (for residential buildings only) • DOE2 (now superceded) • TAS • EcoTect • EnergyPlus which is what I am using

  4. How building simulation is used in designing Australia office buildings: • To verify Building Code of Australia energy efficiency compliance as an alternative fulfilling requirements of the highly prescriptive Section J of the code • To achieve a pre-construction Australian Building Greenhouse Rating (ABGR) • The ABGR Rating also forms the energy component of GreenStar rating

  5. Why focus on office buildings: • Between 1990 and 2005, energy usage by the Australian commercial sector increased by 65% (ABARE, 2006) • Within the commercial sector, office buildings were responsible for the most greenhouse gas emissions, 27% of the sector total (ABARE, 1997)

  6. More reasons to focus on office buildings: BUILDINGS

  7. The research I’m doing at the moment: • Generating simulation models of five actual office buildings with anticipated 4 stars or better ABGR • Field validation of building simulation comparing simulated results with measured data from utilities • Identifying sources of discrepancies between modeled and measured energy use

  8. Drawings generated by EnergyPlus of four of the buildings I’m studying

  9. Things that are starting to look like causes of buildings being less efficient than expected: • Bizarre behaviour of system operators • Fewer occupants than expected, particularly in the early morning causing much greater than expected use of heating

  10. Actual compared with measured base building energy use– Building Two

  11. Occupancy checks – Buildings One and Two.

  12. Thank you for your kind attention…

More Related