1 / 11

Semiconductor Optical Detectors

Semiconductor Optical Detectors. Semiconductor Optical Detectors. Inverse device with semiconductor lasers Source: convert electric current to optical power Detector: convert optical power to electrical current Use pin structures similar to lasers Electrical power is proportional to i 2

ownah
Télécharger la présentation

Semiconductor Optical Detectors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Semiconductor Optical Detectors Fiber Optics Fall 2005

  2. Semiconductor Optical Detectors • Inverse device with semiconductor lasers • Source: convert electric current to optical power • Detector: convert optical power to electrical current • Use pin structures similar to lasers • Electrical power is proportional to i2 • Electrical power is proportional to optical power squared • Called square law device • Important characteristics • Modulation bandwidth (response speed) • Optical conversion efficiency • Noise • Area Fiber Optics Fall 2005

  3. p-n Diode • p-n junction has a space charge region at the interface of the two material types • This region is depleted of most carriers • A photon generates an electron-hole pair in this region that moves rapidly at the drift velocity by the electric field • An electron-hole pair generated outside the depletion region they move by diffusion at a much slower rate • Junction is typically reversed biased to increase the width of the depletion region Fiber Optics Fall 2005

  4. p-n Diode Fiber Optics Fall 2005

  5. Semiconductor pin Detector • Intrinsic layer is introduced • Increase the space charge region • Minimize the diffusion current Fiber Optics Fall 2005

  6. I-V Characteristic of Reversed Biased pin • Photocurrent increases with incident optical power • Dark current, Id: current with no incident optical power Fiber Optics Fall 2005

  7. Light Absorption • Dominant interaction • Photon absorbed • Electron is excited to CB • Hole left in the VB • Depends on the energy band gap (similar to lasers) • Absorption (a) requires the photon energy to be smaller than the material band gap Fiber Optics Fall 2005

  8. Quantum Efficiency • Probability that photon generates an electron-hole pair • Absorption requires • Photon gets into the depletion region • Be absorbed • Reflection off of the surface • Photon absorbed before it gets to the depletion region • Photon gets absorbed in the depletion region • Fraction of incident photons that are absorbed Fiber Optics Fall 2005

  9. Detector Responsivity • Each absorbed photon generates an electron hole pair Iph = (Number of absorbed photons) * (charge of electron) • Rate of incident photons depends on • Incident optical power Pinc • Energy of the photon Ephoton= hf • Generated current • Detector responsivity • Current generated per unit optical power l in units of mm Fiber Optics Fall 2005

  10. Responsivity • Depends on quantum efficiency h, and photon energy Fiber Optics Fall 2005

  11. Minimum Detectable Power • Important detector Specifications • Responsivity • Noise Equivalent noise power in or noise equivalent power NEP • Often grouped into minimum detectable power Pmin at a specific data rate • Pmin scales with data rate • Common InGaAs pin photodetector • Pmin=-22 dBm @B=2.5 Gbps, BER=10-10 • Common InGaAs APD • Pmin=-32 dBm @B=2.5 Gbps, BER=10-10 • Limited to around B=2.5 Gbps Fiber Optics Fall 2005

More Related