1 / 10

Manual Columns, Barriers, Bollards - Installation - Park Guard

Manual Columns, Bollards and barriers provide an assurance of protection while helping to separate individual areas and guide movement.

parkguard
Télécharger la présentation

Manual Columns, Barriers, Bollards - Installation - Park Guard

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Park Guard Park Guard Security | Park Guard System - Park Guard https://www.parkguard.co.za/

  2. Cost for Installation ONLY of Manual Column/ Semi Automatic/ Automatic Parkguards into Asphalt & Concrete Slab surface Position Parking Column in desired location. Mark holes for drilling. Drill 4 x 12mm holes 140mm deep. Inject Epoxy resin into holes. Hammer the 140mm x 12mm threaded bar into holes leaving enough bar protruding for unit base and nut to fasten. (approx 20mm) Allow to set as per epoxy manufacturers instructions. Tighten once epoxy resin set. Should you require installation add number of unit installation to your cart and one of our installers will be in touch with you. R550.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=11&productname=Cost%20for%20Installation%20ONLY%20of%20%20Manual%20Column/%20Semi%20Automatic/%20Automatic%20Parkguards%20into%20Asphalt%20&%20Concrete%20Slab%20surface

  3. Cost for Installation ONLY of Manual Column into Brick Paving & Other surface Brick paving and other surfaces require a Concrete plinth to be cast first. Remove enough bricks for a solid foundation size for the concrete to be cast. Excavate to a depth of 300mm. A pre-cast concrete block can be used and concreted into the void where the bricks were removed. Drill 4 x 12mm x 100mm deep holes into the pre-cast concrete block or the concrete slab. Use supplied rawl bolts to fix unit to the concrete. R690.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=12&productname=Cost%20for%20Installation%20ONLY%20of%20Manual%20Column%20into%20Brick%20Paving%20&%20Other%20surface

  4. Cost for Installation ONLY of Parkguard Barrier into any surface Parkguard Barriers are robust solid devices used for the prevention of theft of vehicles as well as a barrier to restricted areas such as driveways and entrances to buildings like motor dealerships etc. The barrier is concreted into the surface by excavating a hole 900 x300 x 300, and cementing the unit flush with the road surface. Should you require one of our installers to install for you, please add number of units you need installing to your cart below and one of our installers will be in contact with you. Areas: Johannesburg, Cape Town & Durban & surrounding. R1,140.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=12&productname=Cost%20for%20Installation%20ONLY%20of%20Manual%20Column%20into%20Brick%20Paving%20&%20Other%20surface

  5. Manual Barrier Parkguard Barriers are used as an anti theft device as well as a parking bay reservation device. Made from heavy duty 5mm thick Hot dipped galvanized steel. Features · Hot Dip Galvanized · Secured in concrete · Folds flush with surface · A-Frame design lifts wheels off ground to immobilize the vehicle. · Easy to Install R2,500.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=10&productname=Manual%20Barrier

  6. Manual Parking Column SDZ Parkguard Manual Parking Columns are designed to prevent unauthorized use of parking bays. High quality design and construction Made from 3mm mild steel Powder Coated for protection against corrosion. Height when lowered 100mm Height when raised 650mm Discount based on volume R1,100.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=4&productname=Manual%20Parking%20Column%20SDZ

  7. Removable Bollard Removable Lockable Bollard Made from mild steel and galvanized. Height of 520 mm when installed and upright. Remaining base plate protrudes only 50 mm above the ground once pole removed. Fix base plate to road surface with 12 mm x 150 mm threaded bar and nut. Use epoxy to set threaded bar into 12 mm holes. Includes Yellow reflective tape for night time visibility. Includes padlock R850.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=24&productname=Removable%20Bollard

  8. Removable Security Post Made from Mild Steel Galvanized Length of post 850mm Height of post above ground 600mm Thickness of post 2mm Width of post 50mm x 50mm Length of base (in ground) 250mm Thickness of base (in ground) 3mm Width of base (in ground) 60mm x 60mm R1,100.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=25&productname=Removable%20Security%20Post

  9. Telescopic Bollard 100mm diameter 540mm high zinc plated includes discuss lock Anti Ram-Raid protection 4mm gauge steel Weight: 19 Kg The bollard is manually lowered into its own steel sleeve which is concreted into the ground to sit flush when not required. R2,500.00 https://www.parkguard.co.za/onlineorders/showproduct.php?prod=26&productname=Telescopic%20Bollard

  10. Contact Park Guard Kwa-Zulu Natal South Africa Tel: 0878131418 Email: info@parkguard.co.za https://www.parkguard.co.za/onlineorders/contact.php

More Related