1 / 10

Multifunctional Panel HDL-MPXB.48

Multifunctional Panel HDL-MPXB.48. HDL-MPXB.48. Basic Information. Subnet ID and Device ID. Device remark. Backlit brightness (for LCD panel only). LED brightness for the buttons. Target totality. Control Target. Key No. Key Remark. key mode. Key Assignation. Select Mode. Save.

patrickschultz
Télécharger la présentation

Multifunctional Panel HDL-MPXB.48

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Multifunctional Panel HDL-MPXB.48

  2. HDL-MPXB.48

  3. BasicInformation Subnet IDand Device ID Device remark Backlit brightness (for LCD panel only) LED brightness for the buttons

  4. Target totality Control Target Key No. Key Remark key mode KeyAssignation

  5. Select Mode Save ModeSetting

  6. ModeSetting Frequently used key modes: Single On: send out one ON command when pressed. Single Off: send out one OFF command when pressed. Single On/Off: send out one ON/OFF (toggle) command when pressed. Momentary: send out one ON command when pressed down, send out one OFF command when released. Combination ON: can send out up to 99 ON commands when pressed. Combination OFF: can send out up to 99 OFF commands when pressed Combination ON/OFF: can send out up to 99 ON/OFF (toggle) commands when pressed.

  7. RemarkSetting 1. Select Remark 2. Edit remark 3. Save

  8. TargetSetting Example: link key 2 to a scene of the dimmer 1/4, parameter 1(area no.) =1, parameter 2 (scene no.) =1. Save

  9. CommandType Frequently used command types: Invalid: disable the command. Scene Switch: Used to recall the scene that you have created in the dimmer or relay. Sequence Switch: Used To recall the sequence that you have created in the dimmer or relay. Universal Switch: Used to send infrared code number, set logic flag On or Off, set the hotel door bell services , disable or enable Motion sensor, … Single channel lighting control: Used to turn on/off one channel (with brightness level and running time in the command) Curtain Switch: Used to open, close or stop the curtain. Broadcast scene: Used to recall some certain scenes (same scene no.) of all Areas of a dimmer or relay module. Broadcast Channel: Used to turn on/off all channels of a relay module or set all channels of a dimmer to the same level.

More Related