1 / 11

Accelerator Research Department B

Accelerator Research Department B. E-163 Micro-buncher. C. Sears, E. Colby, C. Barnes SLAC / ARDB Feb 18, 2003. Accelerator Research Department B. Motivation. Injector system produces bunches of length 5 ps or 1.5 mm

peigi
Télécharger la présentation

Accelerator Research Department B

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Accelerator Research Department B E-163 Micro-buncher C. Sears, E. Colby, C. Barnes SLAC / ARDB Feb 18, 2003

  2. Accelerator Research Department B Motivation • Injector system produces bunches of length 5 ps or 1.5 mm • Optical wavelength = 800 nm, or ~2000 wavelengths over length of initial bunch • To optimize acceleration in accelerating structures, introduce electrons as micro-bunches, with separation = accelerating field frequency

  3. Accelerator Research Department B Schematic for Optical Bunching Technique 8 cm ~12 cm Compressor Chicane IFEL Christopher Barnes 8 February 2002

  4. Accelerator Research Department B Micro-bunching in phase space ~1 psec ~3 fsec ~7 fsec 8 cm ~12 cm Compressor Chicane IFEL Christopher Barnes 8 February 2002

  5. Inverse FEL Parameters Magnet: - 1.8 cm period - 3 periods - 0.5 T on-axis peak field (aw = 0.45) ***This gives overall small energy modulation. Necessary since signature from acceleration also small. We use chicane to transfer small energy modulation into position distribution (i.e. micro-bunches)

  6. IFEL Magnet IFEL Magnet Dimensions • Totals: 52mm x 40 mm x 860 mm • Gap: 8 mm • Iron width: 3 mm • Main magnet width: 6 mm Tapered end magnets • Magnet 1: 4.7 mm • Magnet 2: 1.5 mm Mirror plates for clean truncation of fields. -light blue: steel -dark blue/red: magnets (±polarity)

  7. Magnet Field Simulations Tapering of end magnets gives ½ area peaks to keep bunch on-axis as it traverses magnet. - Fields were produced using Mafia - FEL performance analyzed in Genesis Negligible Bx fields (<10 gauss for |x| < 1 cm)

  8. Field Simulations 2: Focusing Effects • Vertical focusing. f  6.5 m (negligible compared to upstream quads) -no horizontal defocusing seen above numerical noise of simulation

  9. Tolerance Issues 1) Magnetization vector mis- alignment: studied fields produced when magnetization vectors are 5° off of beam axis. Fields were unchanged in gap ( iron dominant). 2) Magnetization strength errors: Gave individual magnets ±5% strength errors. While fields were noticeably changed in gap, emittances and FEL performance were unchanged. Electron energy modulation of optical cycle for ideal undulator and case of magnetization strength errors = 5%

  10. Saturation Relative permeability on the poles of undulator Some saturations problems near sides of undulator. Unimportant since far removed from beam-line. Btotal near edge of undulator

  11. Micro-bunching at ORION The requirements for micro-bunching are the same as those for E163 in large. Greatest concern is successful beam-bunch overlap. 1) laser jitter is comparable to bunch length. Diagnostics equipment such as the streak camera are necessary to confirm beam-bunch overlap within the undulator magnet. 2) Other alignment features necessary to obtain transverse overlap of the beam & bunch. This is more of concern within the undulator since beam & bunch must interact over a greater distance.

More Related