1 / 4

Adjusting Resolution for Smart Board with Sanyo Projectors and Latitude E5520 Laptops

This guide provides step-by-step instructions for changing the display resolution on a Latitude E5520 laptop connected to a Sanyo projector and Smart Board. When the projector does not fully display the Smart Board content, follow these essential steps. First, ensure the VGA cable is connected from the laptop to the Smart Board. Then, right-click on the desktop to access resolution settings, set the resolution to 1024 x 768, and adjust the screen refresh rate to 75 Hz in the advanced settings. This ensures optimal display performance.

perdy
Télécharger la présentation

Adjusting Resolution for Smart Board with Sanyo Projectors and Latitude E5520 Laptops

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Smart Board Connection with Sanyo Projectors and Latitude e5520 laptops. Changing Resolution When the Projector is Not Filling the Smart Board Created by Deb Doebler 9-12-11

  2. Step 1Do this ONLY when VGA cable is plugged in to computer and Smart Board. • Right click on the Desktop. • Under Resolution, change to 1024 x 768.

  3. Step 2 • Click Advanced Settings.

  4. Step 3 • Click the Monitor tab. • Under Screen refresh rate, change from the Default “60” to “75.” • NOTE: This only changes when the VGA cable is plugged into the Smart Board.

More Related