810 likes | 1.26k Vues
Chapter 4: Training and Conditioning Techniques. Reduce Injury Prepare the Athlete. Athletic Trainers and Strength and Conditioning Coaches. Cooperative relationship that serves to condition athletes in an effort to minimize injury and maximize performance
E N D
Athletic Trainers and Strength and Conditioning Coaches • Cooperative relationship that serves to condition athletes in an effort to minimize injury and maximize performance • Knowledge of flexibility, strength, and cardiorespiratory endurance is necessary • Many strength coaches are certified through the National Strength and Conditioning Association
Athletic trainer may be called upon to review programs/make suggestions • Take into consideration components of particular sport and injury prevention • Rehabilitation of injuries is the responsibility of the athletic trainer • Different settings (professional, college, high school) will require differing levels of supervision by the ATC
Periodization in Training and Conditioning • Traditional seasons no longer exist for serious athletes • Periodization • Achieve peak performance • Decrease injuries and overtraining • Program that spans various seasons • Modify program relative to athlete’s needs
Macrocycle • Complete training cycle • Seasonal approach based on preseason, in-season, and off-season • Changes in intensity, volume, specificity of training occur in order to achieve peak levels of fitness for competition • Broken into mesocycles (lasting weeks or months)
Mesocycles • Transition period: • Follows last competition (early off-season) • Unstructured (escape rigors of training) • Preparatory period: • Off-season • Hypertropy/endurance phase (Low intensity with high volume) • Allows for development of endurance base • Lasts several weeks to 2 months • Strength Phase • Power Phase (High intensity/ pre-season)
Preparatory period (continued) • Strength Phase • Intensity and volume increase to moderate levels • Power Phase (High intensity/ pre-season) • Volume is decreased to allow adequate recovery • Competition period: • May last a < week or several months for seasonal sports • High intensity, low volume, skill training sessions • May incorporate microcycles (1-7 days) • Designed to ensure peak on days of competition
Cross Training • Training for a sport with substitutions of alternative activities (carryover value) • Useful in transition and preparatory periods • Variety to training regimen • Should be discontinued prior to preseason as it is not sport-specific
Warm-up/Cool-down Motivation Overload and SAID principle Consistency/routine Progression Intensity Specificity Individuality Relaxation/Minimize Stress Safety Principles of Conditioning and Training
Warm-up • Precaution against unnecessary musculoskeletal injury and soreness • May enhance certain aspects of performance • Prepares body physiologically for physical work • Stimulates cardiorespiratory system, enhancing circulation and blood flow to muscles • Increases metabolic processes, core temperature, and muscle elasticity
General • Activities which bring a general warming to the body(break a sweat) • Not related to sport Specific • Specific to sport • Stretching, jogging, running, throwing, catching Should last 10-15 minutes resulting in effects that will last 45 minutes
Cool-down • Essential component of workout • Bring body back to resting state • 5-10 minutes in duration • Often ignored • Decreased muscle soreness following training if time used to stretch after workout
Improving and Maintaining Flexibility • Ability to move a joint(s) smoothly through a full range of motion (ROM) • Decreased ROM results in: • Decreased performance capabilities • Uncoordinated/awkward movements • Predisposes athlete to injury • Good flexibility is essential for successful physical performance • Recommended by athletic trainers to prevent injury
Factors That Limit Flexibility • Bony structures • Tissue approximation • Excessive fat • Muscle and tendon lengths • Connective tissue • Scarring and contractures • Skin
Range of Motion(ROM) Active range of motion = dynamic flexibility • Ability to move a joint with little resistance • Passive range of motion = static flexibility • Motion of joint to end points without muscle contraction • Must be able to move through unrestricted range • Must have elasticity for additional stretch encountered during activity
Agonist vs. Antagonist Muscles • Joints are capable of multiple movements • Example: • Quadriceps will extend knee with contraction • Hamstrings will stretch during extension • Quads (muscle producing movement) referred to as agonist • Muscle undergoing stretch referred to as antagonist • Agonist and antagonist work together to produce smooth coordinated movements
Stretching Techniques Ballistic • Bouncing movement in which repetitive contractions of agonist work to stretch antagonist muscle • Spindles tighten instead of relax • Possible soreness (soccer example)
Static stretching • Passively stretching • 6-8 second hold • Go to point of pain and back off and hold for 30 seconds (3 to 4 times) • Controlled, less chance of injury • Not dynamic
Proprioceptive Neuromuscular Facilitation • Physical therapy for neuromuscular paralysis • Slow-reversal-hold-relax • Contract-relax • Hold-relax • Ten second push, ten second relax • Best technique to improve flexibility • Autogenic inhibition (push = tension) • Reciprocal inhibition (pull = relax)
Neurophysiological Basis of Stretching Stretch Reflex • Muscle is placed on stretch(muscle spindle) • Muscle spindles fire relaying info. to spinal cord • Spinal cord relays message to golgi tendon and increases tension • After 6 seconds golgi tendon organ (GTO) relays signal for muscle tension to decrease • Prevents injury - protective mechanism
With static stretching golgi tendons are able to override impulses from muscle spindle following initial reflex resistance • Allows muscle to remain stretched without injury • PNF benefits greatly from these principles • With slow-reversal hold technique, maximal contraction of muscle stimulates GTO reflex relaxation before stretch applied
Relaxation of antagonist during contraction = autogenic inhibition • During relaxation phase, antagonist is placed under stretch but assisted by agonist contraction to pull further • Contraction elicits additional relaxation of antagonist (protect against injury) • Referred to as reciprocal inhibition
Flexibility vs. Strength • Co-exist • Muscle bound = zero flexibility • Strength training will provide individual with ability to develop dynamic flexibility through full range of motion • Develop more powerful and coordinated movements
Measuring Range of Motion • Various devices have been designed to accommodate joint sizes and complexities of movement • Goniometer most widely used device • Protractor (degrees) that utilizes alignment of two arms parallel to longitudinal axis of two segments involved in motion • Relatively accurate tool for measurement
Muscle Strength, Power, and Endurance Strength: ability to generate force against resistance Power: is the relationship between strength and time Muscular endurance: repetitive muscular contractions (increase strength = increase endurance
Muscle Contractions • Isometric contraction • No length change occurs during contraction • Pro: quick, effective, cheap, good for rehab • Con: only works at one point in ROM • Isotonic contraction • Concentric- shortening of muscle with contraction in an effort to overcome more resistance • Eccentric - lengthening of muscle with contraction because load is greater than force being produced • Both are considered dynamic movements
Fast Twitch vs. Slow Twitch • Motor units with distinct metabolic and contractile capability Slow twitch (Type I): • Fatigue resistant • Time necessary to produce force is greater • Long duration, aerobic type activities • Generally major constituent of postural muscles
Fast twitch (Type II) • Fatigue • Anaerobic in nature • High force in short amount of time • Produce powerful movements • A vs. B Individual make-up • Muscles contain both types of fibers • Muscle functioning impacts ratios (postural vs. powerful movement) • Genetically determined Metabolic capabilities can change in response to training
Factors that Determine Levels of Muscular Strength • Hypertrophy vs. Atrophy • Size of muscle: function of diameter and number of fibers • Neuromuscular efficiency • Biomechanical factors • Overtraining (psychologically, physiologically) • Reversibility
Physiology of Strength Development • Three theories of muscle hypertrophy: • Increase in number of fibers • Infusion of blood - transient hypertrophy • Increase in protein myofilament number and size • PROVEN • Other enhancements due to training • Increased noncontractile tissue strength, bone mineral content, aerobic/anaerobic enzymes, enhanced oxygen uptake
Techniques of Resistance Training • Progressive resistance exercise • Overload principle must be applied • Must work muscle at increasingly higher intensities to enhance strength over time • If intensity of training does not increase, but training continues, muscle strength will be sustained
Overload Principle • Activity must be increased and upgraded constantly in order to gain a higher response from the body • Work at or near maximum capacity • Applicable to conditioning and training
Isometric Exercises • Contraction where muscle length remains unchanged • Muscle contraction that lasts 10 seconds and should be perform 5-10 times/daily • Pro: quick, effective, cheap, good for rehab • Con: only works at one point in ROM, produces spiking of blood pressure due to Valsalva maneuver
Progressive Resistance Exercises (Isotonic training) • Shortening/lengthening • Concentric vs. Eccentric • Various types of equipment can be utilized • (Free weights, machine weight) • Spotter is necessary for free weight training to prevent injury, motivate partner and instruct on technique
Concentric and eccentric training should be incorporated for greatest strength improvement • Concentric phase of lift should last 1-2 seconds, eccentric phase 2-4 seconds • Variations exist between free and machine weight lifting • Motion restrictions, levels of muscular control required, amount of weight that can be lifted
Terminology associated with weight training • Repetitions • Repetition maximum • One repetition maximum • Set • Intensity • Recovery period • Frequency
When training should be able to perform 3 sets of 6-8 repetitions • Increases should occur in increments of 10% • 1 RM can be utilized measure maximum amount of weight that can be lifted - must be very careful • Training of a particular muscle group should occur 3-4 times per week (not on successive days)
Muscular Endurance vs. Strength • Training for endurance enhances strength and vice versa • Training for strength should involve lower repetitions at heavier weight • Training for endurance requires lower weight at 12-15 repetitions
Isokinetic Training • Muscle contraction at a constant velocity • Maximal and constant resistance throughout the full range of motion • Maximal effort = Maximal strength gains • Disadvantages • Cost • Need for maximal effort/motivation • Rehab
Circuit Training • Combination of exercise stations • 8 - 12 stations, 3 times through • Design for different training goals • Flexibility • Calisthenics • Aerobic exercise
Calisthenic Strengthening Exercises • Free exercise • Isotonic training • Gravity’s involvement determines level of intensity • Full range of motion, may incorporate holding phase • Pull-ups, push-ups, back extensions, leg extensions