Download
1 / 9
100 likes | 127 Vues
So here’s our attempt to rearrange and add to the lists and confer them more of a mechanical taste and flavour and include some of the own lessons learned throughout the years.
E N D
Take a look at the list of skills set for Mechanical Engineers:
Take a look at the list of skills set for Mechanical Engineers: 1. Never ever lend the following belongings of yours: Machinery’s Handbook Shigley’s Mechanical Engineering Design Making Things Move: DIY Mechanisms for Hobbyists, Artists, and Inventors. 2. Project planning follows the Pi rule: No matter how much time you take to think you can finish something in, multiplying it by pi, you will get the actual length of time (duration) it takes.
3. Parkinson’s Law: Work expands such that it fills the time available for its completion. Don’t spend or plan too much time for a project or it will never be finished. When talking about done, check out The Cult of Done Manifesto. If it wasn’t for that last minute haste, nothing would ever get done.
6. Write everything into a document, everything you do. You don’t know that someone at some point will tell you to justify your design, and if you answer with, “it kind of type looked correct” is not a satisfactory answer. This is specifically true on collaborative projects. The group will never remember who did what and it will lead to going back and changing things that much harder. 7. The design is a frequentative process. The necessary count of frequent occurrence is one more than the number you currently did. This is very true at any point in time.
8. Questioning is a must. If you don’t know or understand something, say it so. Your efficiency as an engineer depends not in being amazingly intelligent, but in knowing how to get at the correct resources to figure it out. Your job demands honesty and lots of sincerity, if you cheat, people have to pay for might be with life as well.
9. To design for disassembling is only that important as designing for assembly. It might not or it will never work the first time you put things together. Also ensure there is that everywhere there is a screw, and also a place for a screwdriver to put it. And for a hand to fit around the screwdriver.
10. Business has been always a part of engineering. Never work for free (unless it’s your choice or you really have to) but never work without a contract. Also never design a better mousetrap then and then; expect someone to expect it or ask for it. The products which sell the best are not necessarily the ones which are technologically superior.
11. Your design must be based on the requirements. There’s no point of justifying designing something little bit “better” than what the requirement dictated. Better is always the enemy of good enough. First finish your work next get involved in some other task or spend time playing. After you have finished, you can think of some other things. 12. Engineering is but playing with numbers. To analyze without numbers is just an opinion.
13. You have to be friendly and talk to your machinist and any respective shop techs. You might have a fancier title or degree, but that makes you nothing matter from a mechanical engineer’s point of view. Small discussions on how to make a part more easily machinable/mouldable/etc. can save thousands of dollars and make you both appear good. In this process, you might even learn something. One more thing I want to tell you that if want to know more about mechanical engineering you should visit ASME site, this site has lot’s of information for mechanical engineers.
