SlideServe
Menu
Préférences
© SlideServe · v2026

Ubiquitous Computing Practice ( xbee - Communication)

reed-simpson avatar
32 diapositives · 466 Views · Nov 06, 2014

This document provides a comprehensive overview of XBee communication, focusing on its configuration and practical applications. It includes an introduction to XBee modules and shields, use of X-CTU software for module setup, and testing communication between devices. Topics covered include point-to-multipoint networking, echo server/client examples, and multi-hop communication. Additionally, it discusses challenges such as controlling LEDs and transmitting sensor data using XBee protocols, offering a valuable resource for beginners and practitioners in the field of ubiquitous computing.

Ubiquitous Computing Practice ( xbee - Communication) - slide 1
01 / 32Ubiquitous Computing Practice ( xbee - Communication)
1 / 17

Télécharger la présentation

Ubiquitous Computing Practice ( xbee - Communication)
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Ubiquitous Computing Practice(xbee - Communication) Youn-Hee Han, In-Seok Kang {yhhan, Iseka}@kut.ac.kr Laboratory of Intelligent NetworksAdvanced Technology Research CenterKorea University of Technology http://link.kut.ac.kr

  2. Contents • Introduction • Xbee Module, Shield • Setting Xbee Module • X-CTU software • Xbee Communication • Xbee Communication Test • Simple Example • Echo server/client • Multi Hop Communication

  3. Introduction

  4. Introduction • X-CTU software • This is what you need to configure the Xbee modules. • Xbee modules • Series 1(802.15.4), Series 2(zigbee), DigiMesh • XbeeExplorer USB, Xbee Shield

  5. Introduction • Xbee Explorer USB • Install the firmware, changing setting

  6. Introduction-Xbee • Xbee • These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking • Chip Antenna, Wire Antenna…

  7. Introduction-Xbee Shield • Xbee Shield

  8. Arduino board + xbee shield + xbee module

  9. X-CTU program 을 이용하여 Xbee module 를 설정한다. Setting xbee module

  10. X-CTU program

  11. Xbee module을 Coordinator, Router/End Device로 설정 Xbee Module Setting

  12. Coordinator setting

  13. 완료 후 Read 버튼 클릭 후 정보 확인

  14. Router, End device • Coordinator 연결을 유지하고 설정 한다. • Coordinator 설정 후 PAN ID 값에 맞춘다.

  15. Router/End device

  16. Router/End device DL = 0 확인 Write 클릭

  17. Xbee setting coordinator Router & end device

  18. Xbee Communication TestSimple ExampleEcho server/clientMulti Hop Communication Xbee Communication

  19. Xbee communication Test

  20. Xbee communication Test

  21. Xbee Communication Test void setup() { Serial.begin(9600); } void loop() { Serial.println(“hello world”); delay(1000); }

  22. Xbee echo server/client Send Data Response

  23. Sketch • void setup() { • Serial.begin(9600); • } • void loop() { • while(Serial.available()){ • char getData = Serial.read(); • if(getData == 'a'){ • Serial.print(‘a’); • }else if(getData == 'b'){ • Serial.print(‘b’); • } • } • }

  24. a = send data a = recive data b = send data b = recivedata

  25. 도전과제

  26. 도전과제 • Xbee통신으로 LED를 제어하기 • Coordinator 에서 데이터를 전송하여 Router에서 LED 제어하기 • Ex) “5” 라는 데이터 전송 시 5개의 LED on • Ex) “3” 라는 데이터 전송 시 3개의 LED on • 온도, 조도, 습도 센서 값을 전송하기 • Router 에서 Coordinator 로 전송하기

  27. Thank You