1 / 31

SUMMER TRAINING AT UCAL FUEL SYSTEM LIMITED, GURGAON

This presentation by Vikramsingh.12328 provides an overview of the summer training completed at UCAL Fuel System Limited, including a study of throttle body assembly and various models of delivery pipes.

reed
Télécharger la présentation

SUMMER TRAINING AT UCAL FUEL SYSTEM LIMITED, GURGAON

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SUMMER TRAINING AT UCAL FUEL SYSTEM LIMITED, GURGAON

  2. SUMMER TRAINING PRESENTATION BYVikramsingh 12328

  3. ACKNOWLEDGEMENT I am very grateful to all under whom I completed my summer training . I would like to give my heartiest thank to Mr. PramodRanawho give me opportunity (letter to join us trainee) to do training at UCAL FUEL SYSTEM LIMITED. I am very grateful to them for introducing me to the technicalities and process flow of the plant.

  4. Products made in company • INTAKE MANIFOLD • DELIVERY PIPE • OIL PLATE • CHAIN COVER • THROTTLE BODY • THROTTLE BODY HOUSING

  5. STUDY OF ASSEMBLY OF THROTTLE BODY AND DELIVERY PIPE

  6. VARIOUS MODELS OF DELIVERY PIPE • Y88 DPT-002E • F8B DPT-007C • YM1 DPQ-001E • YE2 DPQ-010 • YJ9 DPQ-003E • YG4 DPQ-005 • YV4 DPQ-013 • YN4 UDP-2 • OMNI • MARUTI 800 • WAGONR • ESTEEM • GYPSY • ALTO • RITZ • SWIFT

  7. Throttle body

  8. What is throttle body? It helps control the amount of air that goes into the engine. Inside the throttle body something called the throttle, which is normally a butterfly valve. Everytime this valve opens , air gets sucked into the engine .When it closes the suction slows down. The throttle body can normally be found in between the air filter and intake manifold.

  9. WHAT IS THROTTLE….CONTINUES…… There is normally an airflow sensor near the throttle body to measure the amount of air going into the engine. The car’s computer decides how much fuel to add into the air mixture into the air/fuel mixture based off theis measurement.

  10. How does it works? The throttle valve is controlled with a lever by a direct mechanical linkage from the accelerator , the more the accelerator is pressed down, more the valve opens up and lets more air in. There is something new called “drive-by-wire ” this is when wire is electronically controlled.

  11. How does it works….. Instead of the accelerator being connected to the linkage directly , it is connected to a sensor . the sensor detects the throttle position and sends that information to the cars engine control unit(ECU). The ECU then determines how much the throttle valve should be opened.

  12. Applications:1.Passenger cars and vans. Range: Bore size from 32mm to 80mm Customers: Marurtisuzuki, Hyundai,BOSCH,Continental.

  13. ASSEMBLY OF THROTTLE BODY: PROCESS DESCRIPTION: 1.Marking:a)Customer part number b)Model no. c)date 2.Locate the bush in the punch and the 200 button.

  14. NIPPLE PRESSING EQUIPMENTS: PROCESS DESCRIPTION: P/M/TOOL Required. Pneumatic press

  15. PRODUCT /PROCESS SPECIFICATION: .05mm to .5mm gap from cast surface Air pressure more than 5kg/cm^2. Inspection method filler gauge

  16. Inspection method:Filler gauge: Inspection frequency:2 piece 4 times per day. Inspection required 2 piece 4 times per day.

  17. PROCESS MACHINE TOOL REQUIRED: 1. Air pressure minimum 5kg/cm^2 2. Hydraullic pressure min. 16kg/cm^2.

  18. Product process specification tool • Clarity of marking • Depth 5.5+.3 spring side • Depth 3.5+.3 TPS (throttle position sensor. Inspection method: • DIG caliper • By hand.

  19. INSPECTION FREQUENCY: • TWO PIECE FOUR TIMES A DAY.

  20. ASSEMBLY OF BRACKET: PROCESS DESCRIPTION: Tighten bracket with scrrew driver. PROCESS MACHINE TOOOL REQUIRED : Pneumatic screw driver

  21. Product process specification : Torque 35+_10 kgf/cm^2. Inspection method: torque wrench Inspection frequency: 100%

  22. ASSEMBLY PROCESS

  23. APPLYINGMOLYBDENIUM IN THROTTLE SHAFT AREA ASSEMBLY OF TPS ASSEMBLY OF THROTTLE VALVE:

  24. THROTTLE VALVE FIXING SCREW STAKINGRACING EQUIPMENTSFULL CLOSE LEAKE TESTING & IDLE ADJUSTING

  25. ASSEMBLY OF ISCV(Ideal speed control valve) LEAK CHECKINGFINAL INSPECTION

  26. WHAT IS DELIVERY PIPE? IT ALLOWS THE CONSTANT FUEL SUPPLY THROYUG PRESSURE REGULATOR.

  27. DELIVERY PIPE:

  28. ASSEMBLY OF DELIVERY PIPE • 1.BATCH CODE MARKING a).Model no. b).Year code c).month code d).date code • PLUG PRESSING AND CAULKING OF DELIVERY PIPE • ASSY. OF FUEL INLET PIPE & PRESSURE REGULATOR • LEAK CHECKING OF DELIVERY PIPE.

  29. POKAYOKE: SENSOR PROVIDED WITH TORQUE SETTTLER(TORQUE CHECKING) SENSOR AVAILABLE(FOR DETECTING BLOCKED PIECES) AUTOMATICALLY DOT WILL BE PROVIDED WITH PUNCH(FOR O,K, COMPONENTS) 2 HAND PUSH BUTTONS (FOR SAFETY)

  30. THANK YOU

More Related