1 / 10

Jet Turbine Design & Analysis

Jet Turbine Design & Analysis. by Evan Lane. Jet Turbine Project. Scope Design an inexpensive, self-sustaining jet turbine Construct the turbine according to design specifications Analyze the turbine’s performance (if it runs) Class Goals:

regina
Télécharger la présentation

Jet Turbine Design & Analysis

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Jet Turbine Design & Analysis by Evan Lane

  2. Jet Turbine Project • Scope • Design an inexpensive, self-sustaining jet turbine • Construct the turbine according to design specifications • Analyze the turbine’s performance (if it runs) • Class Goals: • Demonstrate knowledge of thermodynamic power cycles • Give you all an exciting demonstration • Provide construction plans (time permitting)

  3. Jet Turbine Project • Personal Goals • Solidify my knowledge of thermodynamics through a practical project • Practice manual & CNC machining skills to get repeatable tolerances of ±.002” • Get to say, “Yeah, I built a jet engine. No biggie.” • Risks & Challenges • Construction timeline • Propane safety • Simplification of fluid flow analysis to fit thermodynamics course scope

  4. Ideal Assumptions(Assumes: air modelled as ideal gas, mass flow due to fuel is negligible)

  5. Design • Enclosure • SCH80 steel pipe enclosure (free) • 2.38” OD • 1.94” ID • Combustor • 24 gauge sheet steel • .125” brass gas inlet • #4 glow plug (“hot” rating) • Compressor & Turbine • Mitsubishi centrifugal compressor: MHI TD04-09B • 16 gauge sheet steel turbine • 10 mm ground steel shaft • 10 mm ID shielded ball bearing: 61800 2RS (from another project) • 10.5 mm ID oilite journal bearing • 5 mm ID oilite thrust bearing

  6. Design • Inlet • Whatever cheap aluminum block I can find lying around (maybe 6061 or 5205) • CNC machined to maintain .03125” clearance with compressor blades • Diffuser • .1875” aluminum sheet • Two parts to simplify machining process • Nozzle • 16 gauge sheet steel • Moveable vanes to allow for adjusting exit velocity and backpressure

  7. Important Variables • Pressure ratio across compressor • Determines temperature ratio across compressor • Temperature at turbine inlet • Relates temperature rise for compressor and turbine • Speed of sound • Important factor in determining thrust • Thrust • Sought after value

  8. Progress • Calculations completed for: • Combustor • Fuel inlet • Parts purchased/ acquired for: • Body • Compressor • Shaft • Bearings • Fuel line • Diffuser

  9. Progress • Parts designed: • All • Parts machined/ completed: • Diffuser • Compressor • Body

  10. Questions?

More Related